Download Article
Download Article
Dry ice is the solid form of the chemical carbon dioxide (CO 2 ), just like normal ice is the solid form of water (H 2 O). Dry ice is extremely cold (-109.3°F/-78.5°C), so it is used for a wide variety of cooling and freezing purposes in the industrial world. With the right ingredients, it's possible to make your very own dry ice at home — as long as you take proper safety measures, the process is quick and easy!
Steps
-
Grab a CO 2 fire extinguisher and a pillowcase. You only need three things to make dry ice at home: a CO 2 fire extinguisher, a fabric pillowcase that you don't mind getting dirty, and a wide-open outdoor area where children or pets are not in close proximity.- You specifically need a CO 2 fire extinguisher for this method, not an ordinary home extinguisher. Most home extinguishers use fine powders of a chemical like sodium bicarbonate or potassium bicarbonate, which won't supply the CO 2 needed to produce dry ice. [1] X Research source
- CO 2 fire extinguishers are usually used for laboratories, kitchens, and around mechanical equipment. [2] X Research source They usually have a black plastic horn on the nozzle and have no pressure gauge.
- You can find CO 2 extinguishers at some hardware stores and online specialty retailers.
-
Protect your hands, eyes, and limbs. Dry ice is so cold that it can easily cause frostbite or "burns" if it comes into contact with bare skin. Though using a fire extinguisher doesn't require a Hazmat suit, you'll want to take precaution to protect your body from any dry ice that may conceivably drop or get sprayed onto you. Put on the following before you start:- Thick leather work gloves (you may wear tight gloves underneath for extra protection)
- Lab goggles or protective eyewear
- Long sleeves and pants
- Close-toed shoes
- Long-sleeved jacket or lab coat
Advertisement -
Wrap the pillowcase tightly around the hose. Put the horn of the extinguisher's nozzle inside the pillowcase. Gather the pillowcase material and wrap it tight around the hose behind the horn. You don't want any gas to be able to escape except through the tight fabric of the pillowcase.- Use duct tape to make a tight seal if you're worried about the pillowcase flying off. The amount of pressure in the extinguisher shouldn't make it hard to hold on, but extra precaution never hurts.
-
Give the extinguisher a blast. When you're ready, squeeze the handle and watch the gas shoot into the pillowcase. Keep this up for 2-3 seconds. You may not think you see ice being produced, but it should quickly start to gather up at the bottom. Release the handle after a few seconds. Carbon dioxide vapor will seep out of the pillowcase — this is normal and safe as long as you're in a well-ventilated area as recommended.- If you can't get the extinguisher to fire, check for the safety pin, which must be removed to allow you to squeeze the handle.
-
Remove the pillowcase. Carefully take the horn out of the pillowcase. Keep the fabric tight against the horn to wipe off any ice sticking to it. You should find a small pile of dry ice at the bottom of the pillowcase — it will be a crumbly white material resembling styrofoam.- Try to keep the bag upright and don't handle the dry ice more than you need to. If you're wearing sturdy safety gloves, you can touch small pieces of the ice for a few seconds at a time, but don't hold on to them for much longer, as they can even hurt fingers through gloves if given enough time.
-
Transfer to a safe storage container. Scrape the dry ice from the pillowcase into a more practical container, like a bowl, a sturdy plastic bag, or a thermos. Keep the dry ice in a single pile and keep the chunks as big as possible to make it last as long as possible. Do not seal the container. If you put an airtight lid on, the pressure of the CO 2 gas will build up, causing the lid to pop off or the container to explode. If you use a lid, do not press it or screw it all the way on.- Not all materials are safe for storing dry ice.
- Do not use fine china, ceramic, or glass containers. The intense cold of the dry ice can cause these materials to contract and break.
- Do not use nice or fancy metal containers. Dry ice can cause the metal to mar and warp.
- Do use sturdy plastic containers (especially coolers and ice chests) to store dry ice.
- Do use thermoses to store dry ice (but do not seal the thermos .)
- Once your dry ice is in a container, store that container somewhere cool, dry, and safe. Don't store it in a regular freezer, as this could shut down your freezer's thermostat. Instead, opt to store it outside, in your garage, or in another area where kids and pets can't get to it.
-
Alternatively, use a CO 2 tank. If you can't get your hands on a CO 2 fire extinguisher, you can replicate this dry ice-making method with a commercial tank of pressurized CO 2 , which are sold at welding supply stores and online. The process is virtually the same — simply attach a horn or nozzle to the tank, wrap a pillowcase around it, blast out gas for a few seconds, and collect the dry ice chunks from the bottom of the pillowcase. The required safety precautions for this method are the same as well.- Before you purchase your tank, make sure that it has something called a dip tube, which is sold separately. These tanks will draw liquid carbon dioxide from the bottom of the tank, which is what you want for making dry ice. On the other hand, tanks without a dip tube will draw gas carbon dioxide from the top of the tank, which won't make dry ice. [3] X Research source Often, dip tube-equipped tanks are marked with two white stripes, while tanks without dip tubes have a black finish. [4] X Research source
- If you plan on making dry ice often, you may want to invest in a dry ice maker attachment, which is essentially a horn nozzle with a fabric bag over the end that can be fastened and removed. [5] X Research source
Advertisement
-
Combine with water to make fog-like gas. One of the most common uses of dry ice is to create artificial smoke or fog. This is as simple as mixing dry ice and water — splashing a bit of water onto the ice creates a hissing noise and produces lots of carbon dioxide gas. This is handy for dances, rock concerts, haunted houses, and other places where you might want to create an eerie, mysterious atmosphere.- As always, make sure that you make carbon dioxide gas only outdoors and in well-ventilated areas. Though unlikely, producing lots of carbon dioxide gas in an area with poor ventilation can eventually force the oxygen out, making it impossible to breathe.
- If you use a container with a small vent hole, you can produce a geyser-like contraption where fog shoots out in a narrow jet. This can even be powerful enough to power a small motor or turn a pinwheel.
-
Use dry ice to carbonate liquids. Another frequent use of carbon dioxide is to make carbonated beverages (fizzy drinks like soda, beer, champagne, and sparkling water). Putting dry ice in water causes it to release carbon dioxide into the water which eventually gathers in the small bubbles that are the mark of any carbonated drink. Though most commercial and home-brew beverage-making operations actually use CO 2 gas (rather than solid CO 2 in the form of dry ice) the latter will still have something of an effect. [6] X Research source- Do not drink your beverage while there is dry ice in it. Wait for the dry ice to bubble away completely before drinking. Swallowing dry ice can cause major internal damage — internal tissues are more vulnerable to frostbite than skin.
- Some people don't like the taste of dry ice-carbonated beverages. You may want to sample the process with a small amount of your liquid before trying it with the main batch.
-
Use dry ice to keep food and beverages frozen. Dry ice is much, much colder than regular ice, so it can obviously keep food and drinks much, much colder. However, the danger with dry ice is that the food or drink may become too cold — put a bottle of champagne on top of dry ice, for instance, and it may shatter or partially freeze, so only use dry ice for foods that are best served frozen (like ice cream, popsicles, etc.)- To use dry ice in an ice chest, add your cold foods to the ice chest first, then place the dry ice on top and loosely shut the lid (as always, take care not to seal it completely.) Cold air sinks, so this arrangement keeps the chest frozen most efficiently. If there is any leftover space, fill it with wadded-up newspaper (extra air will make dry ice sublimate (turn into gas) faster.
- Dry ice also works well for keeping normal ice frozen in a cooler.
- Typically, you will want about 10 to 20 pounds of dry ice for every 24-hour period you need to keep your food items frozen (depending upon the size of the ice chest.)
-
Use dry ice to store loose food. Surprisingly, dry ice can be used to keep foods like grains, beans, lentils, and pastas fresh. To do this, first place the dry ice at the bottom of a cooler. Make sure there isn't any frost on the dry ice, as this can introduce moisture and get your food wet. Pour your food products over the dry ice. Let this sit with the lid loosely on (but not sealed) for about five to six hours — the ice needs to completely sublimate (turn into gas) until there is no solid left. When this is done, seal the lid.- As the ice sublimates, it forms CO 2 gas, which is heavier than air. As more gas forms, it forces the air out of the container. Without any air in the container, it is very difficult for bacteria or pests to survive, which greatly extends the food's life.
- For this method, you will want to use about 1/4 pounds of dry ice per five-gallon container.
-
Use dry ice to shrink solid materials. As mentioned above, dry ice is so cold that it will actually cause materials like metal and ceramic to shrink slightly when it touches them. In certain situations, this property can actually be used to your advantage. See below for two examples: [7] X Research source- Fixing car dents: If you have a small "ding" on your car's exterior that looks like the metal has been pushed inward, dry ice may be able to help. Use heavy gloves to press a block or sheet of dried ice against the dent. If you can, press it against the inside of the dent as well. Hold the ice in place until frost forms a few inches around the dent, then remove the ice and let the material warm again. Repeat as needed until the dent smooths.
- Removing floor tiles: This trick is great for removing one or two ceramic tiles from your floor. Place a flat sheet of dry ice centered on the floor tile so that it touches its entire surface. Wait until the entire tile is frosted over. If the tile does not pop out by itself, use a few taps from a hammer and screwdriver to loosen the adhesive along the edges.
Advertisement
Community Q&A
Search
-
QuestionCan dry ice be made in a special freezer?Community AnswerNo, it requires special equipment to reach the temperature needed.
-
QuestionHow do I make ice creamCommunity AnswerGet some ice, ice cream salt, zip lock, and some heavy cream. Put some heavy cream in a small zip lock bag. Get a bigger zip lock bag, and put some ice and the ice cream salt in there. After that, put the zip lock bag with the heavy cream into the zip lock bag with the ice and ice cream salt. Shake it for about 20 minutes. Get your ice cream out of the zip lock bag and enjoy your ice cream.
-
QuestionCan I make dry ice without a fire extinguisher?Community AnswerYes, if you can get your hands on any source of pressurized carbon dioxide, such as a soda machine.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- For serious dry ice needs, it's also possible to buy dry ice-making machines. However, these can easily cost several thousand dollars.Thanks
- If want bulk amounts of dry ice, your best option is to buy it from a commercial retailer. Some supermarkets sell dry ice, but if you can't find it near you, you can also order it online from specialty suppliers.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not let the dry ice touch your bare skin. You will receive painful frostbite .Thanks
- Handle dry ice in a well-ventilated room. As the solid carbon dioxide turns into a gas, it replaces oxygen in the air.Thanks
- If you are a child, perform this experiment only under adult supervision and use thick leather gloves for handling dry iceThanks
- When storing dry ice, do not put a lid on the container. As it sublimates, the gas needs to dissipate in the air. The container will shatter if left shut.Thanks
Advertisement
Things You'll Need
With a Carbon Dioxide Tank
- Carbon dioxide tank
- Gloves
- Goggles
- Heavy-duty tape
- Plastic ice bag
- Jar or bowl
With a Fire Extinguisher
- CO2 Fire Extinguisher
- Gloves
- Pillowcase
- Bowl
References
- ↑ https://www.usf.edu/administrative-services/environmental-health-safety/programs-services/fire-safety/fire-extinguishers.aspx
- ↑ https://sciencing.com/make-easy-dry-ice-7768634.html
- ↑ https://spark.iop.org/making-dry-ice
- ↑ https://spark.iop.org/making-dry-ice
- ↑ https://www.youtube.com/watch?v=TYwQcRXviIAt
- ↑ http://www.morebeer.com/content/kegging-homebrew
- ↑ http://www.dryiceinfo.com/other.htm
About This Article
Article Summary
X
Before you try to make dry ice with compressed carbon dioxide, protect yourself from frostbite by putting on protective clothing, gloves, and eyewear. Working in a well-ventilated space, wrap a pillowcase tightly around the nozzle of a carbon dioxide fire extinguisher. Squeeze the handle of the fire extinguisher for 2-3 seconds, then remove the fire extinguisher. You should see a small pile of dry ice gathered in the bottom of the pillowcase. Transfer the dry ice to a sturdy plastic container like a thermos or a cooler, but do not seal the container. If you want to learn how to use your dry ice after you make it, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 707,725 times.
Reader Success Stories
- "Great lesson on using dry ice in a cooler. I will be experimenting with dry ice vs water ice to see which will be more effective at keeping temps low and, more importantly, for how long." ..." more
Advertisement
"Great lesson on using dry ice in a cooler. I will be experimenting with dry ice vs water ice to see which will be more effective at keeping temps low and, more importantly, for how long."
..."
more
"I'm making a redneck DC solar air conditioner for my Scotty camper using dry ice. I just wanted to know. Thanks."
..."
more
"1) Easy Steps 2) Illustrations 3) Safety Precautions. Science should be made this fun and easy in schools!"
"Using a CO2 fire extinguisher to make dry ice. Looking for possible ways to store food in an emergency."
"It's nice to know easy tricks like this, plus I like the simple way in which it was explained."
