3 DIY Guides for Creating Fireworks from Home

PDF download Download Article
PDF download Download Article

Fireworks are great for holidays, celebrations, or just an afternoon thrill. But how exactly can you make your own from home? Though sky-bound explosives are not something you can DIY your way through, there's some super exciting, fiery fun you can create right in your own backyard. And what's more, we're walking you through everything you need to know! For a complete guide to creating your own fireworks, read on.

How to Make Fireworks

  1. Mix potassium chlorate, aluminum shavings, and charcoal.
  2. Add dextrin and water.
  3. Stir in strontium nitrate for red fireworks or barium nitrate for green.
  4. Dip wires or sticks into the mixture.
  5. Let dry for 24 hours.

Ingredients

Making Sparklers

Making Glow Snakes

  • Sand
  • High-proof alcohol like Bacardi 151
  • 1.5 grams (0.053 oz) of sugar
  • .375 grams (0.0132 oz) of baking soda

Creating Smoke Bombs

Method 1
Method 1 of 3:

Making Sparklers

PDF download Download Article
  1. Mix potassium chlorate, aluminum files or shavings , and charcoal in a bowl. Pour your dry ingredients—300 grams (11 oz) of potassium chlorate, 60 grams (2.1 oz) of aluminum files or shavings, and 2 grams (0.071 oz) of charcoal—together in a bowl. Use a spoon to mix the powders until they’re evenly distributed. [1]
    • Use a digital scale to weigh to get as close to the correct amounts as possible.
    • Break apart clumps that form in the powder so your ingredients mix thoroughly.
    • Note that for some people, potassium chlorate can be hard to track down. Local science shops and pharmacies are a great place to start.
  2. Add dextrin and water to the mixture until it becomes a moist slurry. Mix 1 teaspoon (4.9 ml) of dextrin with 9 teaspoons (44 ml) of water in a cup. Pour a small amount of your solution into your dry mixture and mix it together. Continue adding the water and dextrin in small increments until the bowl's content's become gooey, like molasses. [2]
    Advertisement
  3. Add strontium nitrate if you want red sparklers. Without any additional ingredients, the sparklers will burn white. If you’d prefer red sparklers, measure out 500 grams (18 oz) of strontium nitrate by weighing it on your digital scale and then, add it to your mixture. [3]
    • If adding the strontium nitrate makes the mixture too dry, add a pinch of your water-dextrin solution so that it regains a goopy texture.
  4. Put in barium nitrate to create green sparklers. Instead of adding strontium nitrate for red sparklers, you can use a smaller portion of barium nitrate to create green ones. Pour 60 grams (2.1 oz) of barium nitrate into the mixture after weighing it precisely with your scale, then mix it in thoroughly. [4]
    • Be sure to mix the ingredients well so they are evenly distributed.
    • Again, add more water and dextrin if the mixture gets too dry.
  5. You can use any stiff wire or wooden sticks to make the sparkler handles. Kabob skewers work particularly well. Dip each handle into the mixture and then pull it out slowly, so the top ⅔ of each stick is covered completely by the mixture on all sides. Leave the bottom third uncovered so that you have enough room to hold your stick. [5]
    • 10 inches (25 cm) is a good length for a stick, and is also the common length for kabob skewers.
    • Make sure to leave at least 4 inches (10 cm) at the bottom for a handle.
  6. Leave the sticks in a safe, dry space that isn’t near any open flames or sparks. If you want, you can poke each stick or wire handle through a shoebox to hold them upright while they dry, but it isn’t required. [6]
    • Laying the sparklers flat on their side while they dry will work as well.
    • Do not touch the mixture until it’s completely dry or it may come off the handle.
  7. Hold the uncovered end of the stick or wire as the handle. Place the opposite end of the sparkler into an open flame and wait for the mixture to ignite. [7]
    • Before you begin, remember to check with your local laws first. In some areas, sparklers are illegal.
    • Like with all fire hazards, exercise extreme caution. Hold your sparkler far from your body and face and be sure to extinguish it completely in water before setting it down anywhere.
    8. Advertisement
Method 2
Method 2 of 3:

Making Glow Snakes

PDF download Download Article
  1. Measure the sugar out into a medium-sized bowl that will be easy for you to stir in. Before you proceed, make sure you're using powdered white sugar (like the kind you'd use for baking). [8]
  2. Use a spoon to make sure the sugar and baking soda are thoroughly mixed together before moving on to the next step. [9]
  3. It doesn’t matter exactly how much sand you use, just pour enough to create a small mound on your plate or baking sheet. Then press your index finger into the top of the mound to create the depression. [10]
    • Once you’re finished, the mound will look sort of like a donut.
    • The depression should go all the way to the pan or plate in the center of the mound.
  4. Wet the sand with high-proof alcohol . Pour alcohol onto the sand that is higher than 80 proof. The higher the proof of alcohol you use, the easier it will ignite. For that reason, extremely high-proof alcohols work best. [11]
    • Pour enough on the sand to make it wet, but not to ruin the shape. This will be roughly 1 tablespoon of alcohol for every 1 cup of sand.
  5. This doesn't require a specific measurement—as long as you fill the hole, you're good to go. [12]
    • Congratulations, your glow snake is ready to be lit!
    • Once the snake it lit, don't add any more alcohol, as you'll run the risk of igniting the bottle. And on that note, keep flammable goods (like your bottle!) far from your glow snake.
  6. There is no wick on the glow snake. Instead, simply take a match or lighter and touch its flame to the alcohol-soaked sand. The sand will ignite first, and then the snake will start to expand. [13]
    • Step away from the glow snake as soon as its lit.
    • Be careful where you light the glow snake. As it expands, it may grow larger than the plate you put it on!
    • Looking for more firework fun? Check out these exciting guides on making homemade fire crackers and creating flash powder .
    7. Advertisement
Method 3
Method 3 of 3:

Creating Smoke Bombs

PDF download Download Article
  1. Wrap the bottom of a soda can in aluminum foil and then remove the soda can. The foil will hold the shape. [14]
    • Shape the aluminum foil so the opening is facing up, then set the mold aside.
  2. Measure the sugar using a dry measuring cup to ensure you have the correct amount. Pour it into a standard sized 12 in (30 cm) skillet but don’t turn the heat on yet.
    • Do not use a measuring cup meant for fluids, as the measurements will be different.
  3. Add 192 grams (6.8 oz) of potassium nitrate . Pour the potassium nitrate into the sugar. Use a wooden spoon to mix the two powders together until they are well blended. [15]
    • Make sure the ingredients are mixed thoroughly for the best results.
    • Spread the mixture out evenly in the pan once it’s thoroughly mixed.
  4. Place the pan on the stove with the burner set to low and continue mixing the ingredients using long, slow strokes. Eventually, the sugar will begin to melt. [16]
    • Continue stirring the mixture as the sugar melts and mixes with the potassium nitrate. You'll probably notice it caramelize and turn brown.
  5. As the sugar melts and mixes with the potassium nitrate, the two will begin to form a liquid sludge. Once it has become liquid enough to roll around the pan, turn off the burner and remove your pan from the heat source. [17]
    • Keep stirring the mixture as you remove it from the heat.
    • For this bit, you'll need to move quickly. The mixture will start hardening soon after it is removed from the heat, and you need to get it into your mold before it does.
  6. Be careful not to spill any of the mixture as you do this. Once there’s a thick layer of the mixture on the bottom of the mold (it can be any depth you choose) set the remaining mixture aside. [18]
    • If there’s enough left over you can always make another smoke bomb.
    • Don't touch the foil once the mixture is inside, because it'll be really hot.
  7. Leave the mixture in the foil overnight—then, the next morning, peel it off the smoke bomb. The smoke bomb itself is entirely flammable, so there’s no need for a fuse. [19]
    • Do not ignite the smoke bomb indoors or breathe in the smoke it produces when lit.
    • Be extremely careful when lighting the smoke bomb, as it may produce more smoke than you expected. Give yourself tons of open space!
  8. There is no fuse on the smoke bomb. To set it off, simply ignite any portion of the mixture using a lighter or match, then set the bomb on the ground or another horizontal surface to burn. [20]
    • The smoke bomb may not burn with a visible flame, but it's still super important that you keep it away from flammable things—just in case.
    • Do not hold the smoke bomb while it burns.
    9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I do this with home items?
    Community Answer
    Not recommended. This experiment has been done so you know what to expect. Other home items could be unpredictable when burned in this experiment.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 19 Helpful 42
  • Question
    What colors are the fireworks?
    Community Answer
    There are no chemicals added to make the flames and sparks colored. The colors of this firework will be yellow, light yellow, or white for this reason.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 48
  • Question
    How well would a smaller can (10 or fewer ounces) work?
    Community Answer
    It would work the same, but with a smaller result as there is less room for flammable materials.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 26
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Refer to local laws regarding making and burning your own fireworks before starting any of these projects.
        Thanks
        Helpful 1 Not Helpful 0

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • To melt the smoke mixture, don't use open flame. Instead, heat it outdoors using an electric hotplate or induction cooktop on low heat.
      • Try adding glitter for extra pizzazz!
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Dispose of Fireworks
      How to
      Make a Flamethrower
      How to
      Make a Sparkler Bomb
      How to
      Make a Signal Flare
      How to
      Store Fireworks
      How to
      Make a Fireball
      How to
      Get a Federal Explosives License
      How to
      Use Eco‐Friendly Alternatives to Fireworks
      Advertisement

      References

      1. ↑ https://sciencenotes.org/how-to-make-a-homemade-sparkler-2-simple-recipes/
      2. ↑ https://food52.com/blog/13269-how-to-diy-sparklers-because-you-can
      3. ↑ https://www.thoughtco.com/how-to-make-a-sparkler-606310
      4. ↑ https://www.thoughtco.com/how-to-make-a-sparkler-606310
      5. ↑ https://sciencenotes.org/how-to-make-a-homemade-sparkler-2-simple-recipes/
      6. ↑ https://food52.com/blog/13269-how-to-diy-sparklers-because-you-can
      7. ↑ https://www.thoughtco.com/how-to-make-a-sparkler-606310
      8. ↑ https://www.thoughtco.com/make-black-snakes-or-glow-worms-605964
      9. ↑ https://www.thoughtco.com/make-black-snakes-or-glow-worms-605964
      1. ↑ http://kitchenpantryscientist.com/flammable-science-homemade-black-snake-fireworks/
      2. ↑ https://youtu.be/_vJXpEn9cjU?t=223
      3. ↑ http://kitchenpantryscientist.com/flammable-science-homemade-black-snake-fireworks/
      4. ↑ https://www.thoughtco.com/make-black-snakes-or-glow-worms-605964
      5. ↑ https://www.thoughtco.com/how-to-make-a-smoke-bomb-606321
      6. ↑ https://www.linkedin.com/pulse/how-make-smoke-bomb-james-michael-christman/
      7. ↑ https://www.thoughtco.com/how-to-make-a-smoke-bomb-606321
      8. ↑ https://www.linkedin.com/pulse/how-make-smoke-bomb-james-michael-christman/
      9. ↑ https://www.thoughtco.com/how-to-make-a-smoke-bomb-606321
      10. ↑ https://www.thoughtco.com/how-to-make-a-smoke-bomb-606321
      11. ↑ https://www.thoughtco.com/how-to-make-a-smoke-bomb-606321

      About This Article

      Article Summary X

      To make sparklers, start by mixing 11 ounces of potassium chlorate, 2.1 ounces of aluminum shavings, and 0.07 ounces of charcoal in a bowl. Once the ingredients are combined, mix 1 teaspoon of dextrin with 9 teaspoons of water in a cup. Then, gradually pour the liquid into the other ingredients to create a sludge. If you want red sparklers, stir in 18 ounces of strontium nitrate, or mix in 2.1 ounces of barium nitrate for green ones. After the ingredients are combined, stick stiff pieces of wire or wooden sticks into the mixture before removing them slowly so the bottom half is covered in the sludge. Finally, let the sparklers dry for 24 hours before using them. Make sure you keep the sparkler at arm's length from your body while it’s burning for safety. For tips on how to make smoke bombs or glow snakes, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 390,851 times.

      Reader Success Stories

      • Abdullah Belouchat

        Feb 4, 2022

        "I like it, I made one."
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement