How to Make Halloween Masks

PDF download Download Article
PDF download Download Article

Want to make your own mask for Halloween? Tired of store bought ones, or want a cute kids' project? You can make a latex mask yourself at home using materials from any large crafting or art supply store. You begin by sculpting your design, then creating a mold of the sculpture, which is then cast in latex. This is an advanced crafting project that is a lot of fun.

Part 1
Part 1 of 3:

Gathering Your Supplies and Sculpting the Design

PDF download Download Article
  1. You will need several types of supplies to make your own mask, but you can always use these supplies to make additional masks. These are available online or at large crafting stores.
    • You will need water-based or an oil based clay to sculpt the mask. [1]
    • You will also need a form to sculpt your mask on top of such as a Styrofoam mannequin head. [2]
    • You will need a material called industrial gypsum in order to make a mold of the sculpture. [3]
    • You will need some burlap to make your mold 3-D.
    • Select a good quality brand of liquid latex for your mask. You will need a casting latex specifically formulated for mask making, called RD-407. [4]
    • You can also purchase paints or decorations such as fake fur, sequins, or feathers to put on the mask. This will depend on what final look you are hoping to achieve.
  2. Your clay will become more pliable for sculpting if you warm it a bit first. Place a few blocks of plasticine clay in the oven at a low temperature (150°-200° F) for 15 to 20 minutes.
    • The clay should be very pliable and warm, but not hot to the touch.
    • Do not allow the clay to liquify.
    Advertisement
  3. To sculpt the mask, you will need the form to stay immobile. You can secure the styrofoam mannequin head to a solid wooden base such as a 12' x 12' piece of plywood.
    • Attach the head with duct tape until it is secure.
  4. You should use a thick enough layer of clay that you don't have to worry about it thinning as you sculpt.
    • You can use your hands, sculpting tools, or tools from around the house (like a butter knife or putty knife) to sculpt details including skin textures and exaggerated features.
    • Smooth the surface of the clay with lighter fluid and a small flat paint brush. When you are satisfied with your creation, move on to the next step.
    • It may take you several hours or even days to create the look you are going for.
    5. Advertisement
Part 2
Part 2 of 3:

Making a Mold

PDF download Download Article
  1. In order to transfer the clay sculpture to a latex mask, you need a two-piece mold made out of industrial gypsum, which is porous so that the latex can soak into it as you make the mask in the next step.
    • Your mold will be a reversed 3-D copy of the sculpture you made in the previous step.
  2. First, cut 1 inch (2.5 cm) square pieces of burlap. Set burlap aside and build a clay wall around sculpture starting at bottom below right ear, and working over the head to the left ear.
    • This wall will create a separation for a two piece mold.
    • Mix the plaster in a plastic bucket, and spread an even coat of plaster over clay sculpture, making sure to get plaster into all the recesses of the sculpture.
  3. After the first coat of plaster is set, mix a new batch, and apply the burlap and plaster mixture to strengthen the mold.
    • After the plaster is set, remove the clay wall.
  4. Use a bright colored acrylic paint, which will help you separate the pieces later.
    • After the paint dries, create the second half of the mold in the same way as the first.
    • When the second half of the mold is set, slowly pry the two halves apart. Use a butter knife, working very carefully along the visible seam made by the acrylic paint so you do not crack your mold. Once the two halves are separated, remove the clay and the Styrofoam head.
    5. Advertisement
Part 3
Part 3 of 3:

Applying the Latex and Finishing the Mask

PDF download Download Article
  1. Using a good amount of latex, pour it into the mold making sure to rotate the mold in your hands to get the liquid latex into all the recesses and work out air bubbles.
    • A small brush may help you work the latex into deeper parts of your mold.
  2. Catch this latex in a clean bucket and put it back in the container to save it for the additional coats.
    • Rotate the mold 90 degrees every 5 minutes, so that the latex is evenly distributed to the back, front, and sides of the mold.
    • This will help prevent the latex from pooling up, and becoming too thick in one spot.
    • A hair dryer on the lowest heat setting aimed inside of the mold will speed up the drying process. With a hair dryer, it should only take an hour or so for the layer to dry.
    • Repeat this process until you have built up at least six layers.
    • If you live in a dry climate, allow a day for the latex to air-cure. In a more humid climate, allow 48 hours.
  3. After the latex is cured, and before removal, dust the inside of the mask with corn starch. Don't use talcum powder, as it has been linked to lung cancer. Then, carefully peel the neck away from the mold and add corn starch between the latex and the plaster mold.
    • The talcum will fall into place as you peel the mold from the plaster keeping it from sticking to itself. After you have removed your mask, trim away excess latex to clean up the edges. Be sure to use a sharp scissors to cut away holes for the mask wearer's eyes.
  4. Mix small amounts of acrylic paint with latex in small containers (cap these when not in use). The colors will appear much lighter when wet (for example, when dry a light pink will become a blood red).
    • Experiment with these latex-acrylic paints until you get the look that you want.
    • After the mask is painted, attach hair cut from an old wig, feathers, sequins, or other elements. You can glue these in place with tinted latex. Be creative, and have fun!
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is needed to construct a functioning mask?
    Pillowpig
    Community Answer
    For the simplest kind of mask, you will simply need a thick piece of paper, scissors, and a string to hold it on your head.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 29 Helpful 7
  • Question
    How does it stick to my face?
    Community Answer
    Use a string to tie it around your face.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you have a specific character in mind, you may need to use different materials or techniques to create a mask for that costume. For example, a Zorro mask requires fabric instead of latex.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • The chemicals used in this project should not be used by children except under close adult supervision. Be sure that you use them in a well-ventilated area.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • Oil-based clay
      • Styrofoam head
      • Industrial gypsum
      • Liquid latex
      • Scissors
      • Plaster
      • Acrylic paint
      • Fake hair
      • Mixing buckets
      • Assorted brushes
      • Plastic drop cloth
      • Newspaper
      • Paper towels
      • Corn starch

      You Might Also Like

      How to
      Make a Mask out of Tin Foil and Tape
      How to
      Make a Mask
      How to
      Make a Mask Out of Paper (for Kids or Adults)
      How to
      Make a Latex Mask
      Advertisement

      References

      1. ↑ http://www.monstermakers.com/content/howto.html
      2. ↑ http://www.monstermakers.com/content/howto.html
      3. ↑ http://www.monstermakers.com/content/howto.html
      4. ↑ http://www.monstermakers.com/content/howto.html

      About This Article

      Article Summary X

      To make a Halloween mask, start by putting warm, pliable clay over a Styrofoam mannequin head and sculpting it to get the look you want. Then, you’ll need to make a mold of your sculpture from industrial gypsum, and let it dry before removing it from the clay and the Styrofoam head. Next, pour latex into the mold, rotate it to evenly distribute the latex, then pour off the excess before letting it dry. After that, repeat the process until you’ve built up at least 6 layers of latex. Finally, let the latex dry for 1-2 days before peeling it from the mold. For step-by-step instructions on how to make the mold for your Halloween mask, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 123,085 times.

      Did this article help you?

      Advertisement