How to Make Bracelets Out of Hemp

PDF download Download Article
Craft stylish, DIY hemp accessories with these simple patterns
PDF download Download Article

Making your own hemp bracelets is easy and can add style to any outfit, or be given as a thoughtful gift to a friend. Show off your crafting skills and save a few bucks by trying one of these methods for making a macramé, spiral, or beaded hemp bracelet. These simple pieces of hemp jewelry are quick and easy to make with just a few basic supplies.

Method 1
Method 1 of 3:

Making a Flat Macramé Bracelet

PDF download Download Article
  1. Cut 2 long pieces of hemp about 5 feet (1.5 m) long. Match the ends up and fold both pieces in half. Tie a knot at the fold.
    • The type of knot you’ll be making to start the bracelet is called an overhand knot. It’s the same kind of basic knot you make when you start tying your shoe. Grab the folded end of the lengths of twine and cross it over the loose strands to make a loop, then cross it under again and pull it tight.
    • The length of hemp you'll need will depend on the size of your wrist and how many knots you want in the bracelet. If you want a solidly-knotted bracelet for an average adult-sized wrist, your strings need to be about 2 yd (1.8 m) long. If you only want to make a few knots, you can get away with a lot less string. [1]
  2. Watermark wikiHow to Make Hemp Bracelets
    It helps to tape the loop left from the knot onto a table or safety pin to a chair or the knee of your jeans. This will give you some leverage as you create the pattern of knots in the bracelet.
    • Try fastening the piece to a board or a foam sheet to hold it firmly. That way, you'll be able to pull the knots firmly and evenly, which will help them hold for a long time. [2]
    Advertisement
  3. You should have 4 strands of hemp. For this type of knot, the 2 center strands will remain together, while the outer strands will be moving around.
  4. Watermark wikiHow to Make Hemp Bracelets
    Take the strand on the left and cross it across the 2 middle strands to create a "4" shape.
  5. Watermark wikiHow to Make Hemp Bracelets
    Take the strand on the right and cross it over the tail end of the first strand from the left. Then, pull the strand over and under, up through the loop in the "4" that was created.
    • The kind of knot you’re using to create this kind of bracelet is called a square knot, or half knot.
  6. Watermark wikiHow to Make Hemp Bracelets
    Pull on strands 1 and 4 to tighten the knot. Make sure that all your knots are of an even tightness throughout the bracelet to create a level pattern.
  7. Watermark wikiHow to Make Hemp Bracelets
    Use the same method as explained above to tie a knot starting on the right instead of the left. Each knot should move from the leftmost strand to the rightmost strand to create a flat (rather than a spiral) bracelet.
  8. Watermark wikiHow to Make Hemp Bracelets
    Tie knots back and forth until it reaches a point long enough to wrap around the entirety of your wrist.
  9. Watermark wikiHow to Make Hemp Bracelets
    When you reach your stopping point, tie a basic knot at the end of the bracelet. Cut off any excess hemp and use the knot and the loop on the opposite end to secure the bracelet to your wrist. Enjoy!
    11. Advertisement
Method 2
Method 2 of 3:

Making a Beaded Bracelet

PDF download Download Article
  1. To create a beaded bracelet, you will need natural or dyed hemp and beads of your choice. Any kind of bead will work as long as it has a hole that fits the hemp strands, but seed beads are the best for this project.
  2. Watermark wikiHow to Make Hemp Bracelets
    You will need 3 strands of hemp cut at about 16 inches (40.6 cm) long each. The strands will be braided together, so the finished bracelet won’t be nearly so long.
  3. Watermark wikiHow to Make Hemp Bracelets
    Hold the 3 strings together so that they are even, and tie them off on one end with about 2 inches (5.1 cm) of the strands on one end of the knot. This will be used to attach the bracelet to your wrist when it is finished.
  4. Watermark wikiHow to Make Hemp Bracelets
    Do a classic braid beginning at the knot. Spread the 3 strands out, and then cross the right strand over the center. Then, cross the left strand over the center piece.
  5. Watermark wikiHow to Make Hemp Bracelets
    Continue the pattern of adding the right strand over the left, and then the left over the right, until you have reached â…“ of the way across the desired length of your bracelet.
  6. Watermark wikiHow to Make Hemp Bracelets
    After you cross the right strand to the center, slide on a bead and then cross the left strand over it. Do the same again, crossing the right strand, adding a single bead, and then crossing the left strand, until you’ve completed another â…“ of the bracelet.
  7. Watermark wikiHow to Make Hemp Bracelets
    After adding enough beads, go back to regular braiding until you’ve finished the final â…“ of the bracelet. Tie a knot and cut off the excess hemp about 2 inches (5.1 cm) from the knot.
  8. Make several bracelets and stack them for a bohemian feel, or wear a single bracelet just for fun. Use the loose ends of the string to tie a knot around your wrist or ankle, and enjoy! [3]
    9. Advertisement
Method 3
Method 3 of 3:

Making a Spiral Hemp Bracelet

PDF download Download Article
  1. Watermark wikiHow to Make Hemp Bracelets
    A spiral bracelet will require 4 pieces of hemp. Measure your wrist, and then cut 2 pieces of hemp that are 3x the length of your wrist. Make the other 2 pieces of hemp 5x the length of your wrist.
  2. Watermark wikiHow to Make Hemp Bracelets
    Lay all 4 pieces of hemp out on a table so that the 2 long pieces are on the outside while the 2 shorter pieces are in the middle. Tie a knot on one end, keeping them in this fashion. Leave a bit of extra string on the end to use to secure the bracelet to your wrist when you are finished.
  3. Watermark wikiHow to Make Hemp Bracelets
    Take the long piece on the right and fold the end over the center 2 pieces, forming a “D” shape.
  4. Watermark wikiHow to Make Hemp Bracelets
    Take the long piece on the left, cross it over the tail of the piece from the right, and then bring it through the loop that was formed. This should create a knot around the 2 center strings. You will only be using the long, outer 2 pieces of hemp to do the knot-tying.
  5. Watermark wikiHow to Make Hemp Bracelets
    Working from the right side only, continue making a loop, crossing the left string over and then under and through the loop. After a few knots you will begin to notice a spiral in your bracelet; twist it back to keep it in line as you work.
  6. Watermark wikiHow to Make Hemp Bracelets
    When enough knots have been tied to create a spiral long enough to wrap around your wrist, tie a knot at the end and cut the excess pieces off. You can attach clasps to secure the bracelet to your wrist or simply tie a knot with the loose strands. [4]
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How much hemp do you recommend to make a hemp bracelet for an average adult-sized wrist?
    Lois Wade
    wikiHow Crafts Expert
    Lois Wade has 45 years of experience in crafts including sewing, crochet, needlepoint, cross-stitch, drawing, and paper crafts. She has been contributing to craft articles on wikiHow since 2007.
    Lois Wade
    wikiHow Crafts Expert
    Expert Answer
    If you want a solidly-knotted bracelet, use strings that are approximately 2 yards long for a bracelet. If you only plan to knot 10 knots, you can get away with a lot less string.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How do you tie the bracelet to your wrist?
    Community Answer
    Leave some length on the end of your bracelet, and tie the ends through the loop in the other end. You may need someone to help you.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 7
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • Spice up your bracelet by weaving in a few colorful beads. For example, if you’re making a flat macramé bracelet, simply slide a bead onto the 2 central strands of the bracelet, then tie a knot just below the bead. You can add as few or as many beads as you like. [6]
        Thanks
        Helpful 0 Not Helpful 0
      • You can buy hemp cord in a wide range of colors at most craft stores. Try mixing together strands of different colors to give your bracelet a unique and vibrant look!
        Thanks
        Helpful 0 Not Helpful 0
      • Search online for free hemp bracelet patterns to find more fun design ideas!
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Make String & Beaded Friendship Bracelets
      How to
      Make a String Bracelet
      How to
      Make a Paracord Combat Bracelet
      How to
      Tie Friendship Bracelets
      How to
      Make a Bra Strap Bracelet: A DIY Guide
      How to
      Make a Kandi Cuff
      How to
      Make Leather Bracelets
      How to
      Put Charms on a Pandora Bracelet
      How to
      Make a Rubber Band Bracelet
      A Beginner’s Guide to Reading Friendship Bracelet Patterns
      How to
      Make Jewelry with Wire
      How to
      Make a Horse Hair Bracelet
      How to
      Make Ankle Bracelets
      How to
      Add Charms to a Charm Bracelet
      Advertisement

      References

      1. ↑ Lois Wade. wikiHow Crafts Expert. Expert Interview. 30 July 2020.
      2. ↑ Lois Wade. wikiHow Crafts Expert. Expert Interview. 30 July 2020.
      3. ↑ http://happyhourprojects.com/wish-bracelets/
      4. ↑ http://factorydirectcraft.com/factorydirectcraft_blog/making-spiral-knot-hemp-bracelets/
      5. ↑ Lois Wade. wikiHow Crafts Expert. Expert Interview. 30 July 2020.
      6. ↑ https://www.richlandlibrary.com/blog/2020-06-26/create-your-own-macrame-hemp-bracelet
      7. Videos provided by How to Make Hemp Necklaces

      About This Article

      Article Summary X

      To make a hemp bracelet, start by cutting 2 pieces of hemp that are 3 times the length of your wrist and another 2 pieces that are 5 times your wrist’s length. Then, tie the strings together at one end, with the long pieces on the outside and the short pieces in the center. Next, take the long piece from the right and fold it over the two shorter ones to create a “D” shaped loop. After creating the loop, bring the other long piece over from the left and pull it through the hole in the “D” shape. Repeat this step until the bracelet fits around your wrist, then tie a knot at the end. For tips on how to add beads to your bracelet, read on.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 608,872 times.

      Reader Success Stories

      • Ciera Kehne

        Jul 19, 2016

        "The videos were a big help because they helped me understand the written instructions so I didn't get confused ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement