Download Article
Download Article
Although invisible ink and secret messages seem the stuff of spy stories and wizarding schools, anyone can make invisible ink at home with everyday household ingredients. During the Revolutionary War, armies sent secret messages written with invisible lemon juice. [1] X Research source In World War I, soldiers would use crushed aspirin mixed with water to make invisible ink. [2] X Research source Soldiers have even used their own sweat and saliva to write secret messages in times of war. [3] X Research source It doesn’t take state-of-the-art technology of magic to make invisible ink, and you can do it today. Using common baking soda and a regular light bulb, you can write and reveal hidden messages just like legendary secret agents and historic soldiers.
Steps
-
Mix baking soda and water. Making a solution suitable for invisible ink will take almost equal parts baking soda and water. For the best results, you want to mix as much baking soda as you can into a small bowl of water. Add a little baking soda at a time and mix slowly to fully saturate the water.- 1/4 cup (60 mL) of water will hold 3 tablespoons (43.2 grams) of baking soda.
- If your “ink” has deposits of baking soda that won’t dissolve, the solution is over saturated. Just work backwards: add a little water at a time until the baking soda dissolves completely.
-
Dab a small brush or cotton swab into the solution. Treat the baking soda mixture as you would ink or watercolor paint and load up only a little of the solution at a time.Advertisement -
Write your message on white paper. Using the brush or swab, write your message in clear block letters on a piece of paper. Make sure you write your letters large enough to be legible. The water will bleed into the paper, distorting the letters, so practice using your brush or swab ahead of time.- Consider writing your message in code for added security. For example, a simple substitution code replaces each letter of the alphabet with another letter or a number in a pattern set ahead of time.
- A regular index card makes a great surface for short messages.
-
Allow the “ink” to dry. You want the message to dry without leaving signs that the paper has been tampered with. For better results, try the following:- Press the page between heavy books or other weights. Add a few pieces of paper above and below the page carrying the message so excess moisture does not ruin the books that you use for weight.
- Hang the paper. Photographers hang developing prints to let them dry because gravity will help keep the paper from warping. You can use the same trick by using clothes pegs to hang your message.
- If you use a heavy, high-quality paper or cardstock to carry your message, the thicker paper will warp less than standard copier paper.
-
Consider steaming the page. [4] X Research source When you write your message on the page, the watery “ink” will warp the paper, leaving marks that are visible even after the paper dries. By lightly steaming the page, you can hide all evidence that the paper has been tampered with, which increases the chance your message will go undetected. There are two good methods for steaming your secret message:
- Boil water in an electric kettle or a large pot and hold the page near the rising steam. Steam is extremely hot (hotter than boiling water) so use kitchen tongs or a similar utensil to hold the page.
- Use an iron on the lowest steam setting. Keep your fingers safe from the steam and lightly iron the page.
- If you do steam the page, be sure to use one of the advanced drying methods listed above.
-
Consider writing a decoy message on the dry paper in pen or pencil. [5] X Research source If your message is intercepted before delivery, an empty page would look suspicious. After all, who would go through the trouble of delivering a blank piece of paper? By writing a decoy message on the page, you can throw enemies off your trail. For instance:- Writing a grocery list over your secret message is a classic spy trick. Nobody suspects the humble shopping list.
- If you plan on revealing your secret message with a liquid method (grape or red cabbage juice), don’t write your decoy message in pen! The ink from the pen will bleed across the page when you apply the wash.
Advertisement
-
Expose your message to a source of heat. It takes a good amount of heat to oxidize the carbon in the baking soda enough to reveal your message, which means you need a safe but strong source of direct heat. Several household heating elements can work. [6] X Research source For example:- An incandescent light bulb works. You will need to hold the message near a hot bulb for several minutes to heat the baking soda enough.
- A traditional stove is another idea. Be careful holding a piece of paper too close to hot coils, which could also start a fire.
- Hair dryers can be turned up to a high heat and waved evenly over the page.
- A dry iron can reveal the letters of your message as well. Avoid using a steam setting and draw the hot iron over your paper slowly and evenly. [7] X Research source
- You could place your message on a baking try and put it in an oven set to 250 °F (121 °C), checking every few minutes for your letters to appear.
- Laying your page on an old-fashioned radiator or the top of a toaster can work too. [8] X Research source Pay attention to the paper at all times to reduce the risk of accidental flames.
-
Be careful to avoid catching your page on fire. [9] X Research source Paper is flammable, and holding your page close to direct heat means a chance for accidental flames. Choose the method of heating you feel safest with and avoid using any open flames if possible.- Halogen bulbs emit more heat than standard incandescent bulbs and increase the risk of fire.
- Stoves will heat up slowly but eventually become very hot. Use kitchen tongs to hold your message and avoid getting the paper too close to the coils.
-
Slowly heat your page carrying the secret message. Whatever method you use for heating the page containing the invisible ink, work slowly to ensure you heat the paper only as much as necessary.
- Move your page over the heat source to avoid one place on the paper from getting too hot. [10] X Research source
- It can take several minutes for your letters to appear, depending on the amount of heat you apply, the thickness and texture of the paper, and the saturation of the "ink" you made. [11] X Research source
-
Read the message that appears in brown letters on the page. As the paper warms up, your message will reappear on the page as though being burned into the paper itself. The letters appear brown because sodium bicarbonate (baking soda) is broken down into its parts when heated, allowing the carbon in the baking soda to become oxidized when it touches the air. [12] X Research source- Oxidation is the same reason the flesh of an apple turns brown after sitting out.
Advertisement
-
Thaw grape juice concentrate in a bowl. The best grape juice to use for revealing your invisible ink is the concentrated kind, which often comes frozen. [13] X Research source Concentrated juice contains more acid and will create a stronger reaction with the baking soda in the invisible ink.- You can use any dark, acidic liquid such as cherry or blackcurrant juice or balsamic vinegar to reveal your message.
-
Dab or wash the grape juice concentrate over the page. [14] X Research source Dip a sponge or paintbrush into the concentrate and wash the new “decoder ink” evenly over the page that contains your message.
- Be careful painting with grape juice; it stains.
- Don’t use the same cotton swab or paintbrush you used to write the message.
-
Read the message that appears in gray letters on the page. As you paint over the surface of the paper, your letters will reappear before your eyes. The letters appear gray because an acid-base reaction occurs between the basic baking soda and acidic grape juice. [15] X Research source
Advertisement
-
Boil 2 cups (470 ml) of water. Using a stovetop kettle, electric teapot, or microwave, heat up 2 cups (470 ml) of water. The water does not need to be boiling hot; however, the hotter the water is, the better your concentrated “decoder ink” will work. -
Soak red cabbage leaves in the hot water. Place 10-15 cabbage leaves in a large bowl and pour the hot water over them. Let the leaves soak for a full hour as the water cools. You should see the pigment of the cabbage bleeding into the water over time.
- For the best results, all of the leaves should be submerged in the water.
-
Strain out the cabbage leaves. After the water has cooled, use kitchen tongs or a colander to separate the leaves from the juice.- Store your red cabbage “decoding ink” in the freezer. If you let cabbage juice sit in the fridge, it will rot and smell awful.
-
Dab or wash the red cabbage juice over the page. Dip a sponge or paintbrush into the bowl of red cabbage juice and wash the liquid evenly over the paper that contains your message.
-
Read the message that appears in blue letters. As you coat the paper, your letters will appear in a greenish-blue color on the page. The letters appear this color because red cabbage juice works as a pH indicator and detects the basic baking soda. [16] X Research source- If the message had been written with lemon juice, which is an acid, the letters would have appeared pink instead of greenish-blue. [17] X Research source
Advertisement
Expert Q&A
Search
-
QuestionWhat is the reaction when beetroot is applied over a baking soda solution?Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.The beetroot acts as a pH indicator. A pigment in the beetroot called betanin reacts with alkaline/basic sodium bicarbonate, resulting in a deep purple color.
-
QuestionWill this work with any light source?Community AnswerIf you use blue filters, yes, as the purpose is to use blue light (higher frequency light waves). This can sometimes be achieved with sufficient thin blue surfaces layered over the light. Using a flashlight would be easiest -- superimpose translucent purple and blue sweet wrappers.
-
QuestionCan a purple tinted flashlight be used to read invisible ink?Community AnswerNope. UV lights are usually what has to be used; while a UV light may be purplish, it's a very different kind of light from a flashlight with a purple tint.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Reader Videos
Tips
- Make sure the invisible ink mixture is not too watery. For best results, continue to add baking soda until the solution is fully saturated.Thanks
- You can use regular grape juice instead of concentrate, but your letters will be less visible after revealing the message.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful not to use too much water in your invisible ink. This may cause the paper to become soggy and your letters to blur.Thanks
- When using your heating element, avoid getting the paper too hot. For instance, a halogen bulb produces more heat than a regular incandescent bulb and could set the paper on fire. Likewise, holding paper too close to your stove could do the same.Thanks
- Rotting cabbage juice smells absolutely horrible. If you want to keep the red cabbage juice for later decoding, freeze what you have left in an ice cube tray or other freezer-safe container.Thanks
Advertisement
Things You'll Need
- 3 tablespoons (43.2 grams) of baking soda
- Paper
- Water
- Heating element (such as an exposed, incandescent light bulb)
- Paintbrush, sponge, or cotton swab
- Iron with a steam setting (optional)
- Pencil or pen (optional)
- Concentrated grape juice (optional)
- 10-15 red cabbage leaves (optional)
References
- ↑ http://www.scientificamerican.com/article/bring-science-home-invisible-ink/
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://www.kidzworld.com/article/3844-making-invisible-ink-appear
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://www.scientificamerican.com/article/bring-science-home-invisible-ink/
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://artfulparent.com/2011/06/kid-science-experiments-invisible-ink.html
- ↑ http://artfulparent.com/2011/06/kid-science-experiments-invisible-ink.html
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ http://www.scientificamerican.com/article/bring-science-home-invisible-ink/
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ https://www.teachengineering.org/view_activity.php?url=collection/uoh_/activities/uoh_hp_acidic_ink/uoh_hp_activity_acidic_ink.xml
- ↑ http://ww2.kqed.org/quest/2012/03/07/try-this-at-home-invisible-ink/
- ↑ https://www.teachengineering.org/view_activity.php?url=collection/uoh_/activities/uoh_hp_acidic_ink/uoh_hp_activity_acidic_ink.xml
- ↑ https://www.teachengineering.org/view_activity.php?url=collection/uoh_/activities/uoh_hp_acidic_ink/uoh_hp_activity_acidic_ink.xml
About This Article
Thanks to all authors for creating a page that has been read 108,447 times.
Reader Success Stories
- "Other sites says to use lemon and heat, but once I found this recipe it was so helpful. It is perfect for kids, since baking soda and grape juice are safe." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Other sites says to use lemon and heat, but once I found this recipe it was so helpful. It is perfect for kids, since baking soda and grape juice are safe."
..."
more
