PDF download Download Article
Easy recipes that tastes like you just sat down at the cinema
PDF download Download Article

The appeal of movie theater popcorn has little to do with actual butter, but sometimes you can't beat that nostalgic, greasy taste. You can buy most of the same products used by actual movie theaters, but it's also possible to get close with nothing more than basic pantry ingredients.

Ingredients

  • Popcorn
  • Butter
  • Coconut oil or canola oil
  • Popcorn salt or Alberger salt
  • Flavacol (optional)
  • Butter flavored popcorn topping (optional)
  • Other popcorn toppings "or" seasonings (optional)'
Method 1
Method 1 of 2:

Making Movie Style Popcorn

PDF download Download Article
  1. Many movie theaters use salt processed using the Alberger process, as the many jagged edges on the salt crystals help it stick to the popcorn. [1] Diamond Crystal is the only consumer salt brand in the United States that uses this process. [2] You can get a similar effect from extra-fine powdered salt, which is often sold as "popcorn salt" and stocked next to the popcorn. [3]
    • You can create powdered salt at home by grinding any salt in an electric coffee grinder, hand-turned salt mill, or mortar and pestle. If using a coffee grinder, grind a small amount of coffee beans afterward to remove the leftover salt.
  2. Watermark wikiHow to Make Movie Butter for Your Popcorn
    . Theaters that do use real butter (rather than butter-flavored oil) often use clarified butter. Clarification removes some moisture from the butter, which prevents the popcorn becoming soggy. Orville Redenbacher's and Act II are common brands that use real butter and are the closest to the real thing at the movie theatres. [4] You can clarify butter at home just by melting it over low heat until the bubbling stops and the liquid turns clear, about 30-40 minutes for 1 lb (0.45 kg) of butter. [5] Strain the liquid through a damp cheesecloth and let cool to make clarified butter. Discard the milk solids left in the cheesecloth or at the bottom of the pan.
    • The famous "buttered popcorn" smell of a movie theater comes from artificial butter flavor. Actual butter won't replicate this perfectly.
    Advertisement
  3. Watermark wikiHow to Make Movie Butter for Your Popcorn
    You may want to save the clarified butter for later drizzling, as it will likely brown or burn if you try to pop kernels in it. Coconut oil used to be the standard in movie theaters (and many still use it), but you may wish to follow a more recent trend and switch to canola oil, which has less saturated fat and a higher smoke point. [6] Whichever you choose, pour just enough oil to cover the base of a large pan. Heat on a stovetop until the oil shimmers.
    • Note that most theaters that use canola oil actually use a more hydrogenated version that contains more fat than consumer canola oil.
    • If using coconut oil, the oil should melt completely.
    • You'll need a pan with a lid, but you do not need to cover it now.
  4. Watermark wikiHow to Make Movie Butter for Your Popcorn
    Make the popcorn . Throw in a few unpopped kernels and cover the pot. Once these kernels have popped, add the rest of the popcorn. Use â…“ cup (80 mL) popcorn kernels for a 6 quart (5.6 L) pot. [7] Cover and heat, shaking occasionally, until most of the kernels are popped. Pour popped corn into a large bowl whenever the pot gets full.
    • Leave the lid slightly ajar so some of the steam escapes, preventing soggy popcorn.
    • To reduce the number of burned or unpopped kernels, remove from heat right after adding the kernels. Wait for thirty seconds so the kernels reach an even temperature, then return to heat.
  5. You'll need about â…“ tsp (1.5 mL) of fine grained salt for this recipe. [8] The exact size of the salt crystals affects the flavor, so you may need to adjust to taste. Add the salt right after the popcorn is popped, since the steam clinging to the popcorn will help the salt stick. [9]
  6. Pour the popcorn into a large bowl. Add 1 or 2 tbsp (15–30 mL) room temperature clarified butter to the hot pan, according to taste. It should melt quickly in the hot pan without additional heat. Drizzle it onto the popcorn when the butter is still yellow or only slightly brown.
    • Mix the popcorn after drizzling the butter onto it by using a large spoon or by shaking the bowl to get the butter and salt to mix well.
  7. Advertisement
Method 2
Method 2 of 2:

Using Artificial Butter Flavors

PDF download Download Article
  1. Pop your popcorn in coconut oil or canola oil . These are the two most common oils used by movie theaters. Heat a thin layer of oil until shimmering in a large pot. Add a few test kernels, then add the rest of the popcorn when they pop. Remove from heat for thirty seconds so the kernels reach an even temperature. Return to heat then cook, shaking occasionally, until popped.
    • You'll need about â…“ cup popcorn kernels for a 6 quart (5.6 L) pot.
  2. Many theaters add a salt product that contains artificial butter flavor, often sold under the brand name Flavacol. [10] You can order this online to add to your own popcorn. Since 1 tsp (5 mL) Flavacol contains 116% of the FDA-recommended daily sodium limit, it's best to sprinkle sparingly. [11]
    • Theater employees typically toss in the Flavacol before popping. However, Flavacol does release airborne chemicals when heated which could cause harm over long term use. [12] This is unlikely to happen if you only make popcorn for personal use, but you can add the Flavacol after cooking if you are concerned.
  3. The Flavacol should already add that artificial butter flavor, but if you want that greasy feel on your tongue and fingers, you can buy a jug of "popcorn topping" online. Drizzle this on top to taste after your popcorn is ready.
    • As you might imagine, this is mostly hydrogenated fat, and not the best for your health. [13] These products may also contain diacetyl or other ingredients linked to respiratory problems and (less conclusively) to Alzheimer's, although these are only likely to cause harm over long periods of time. [14]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Is the second method better?
    Tuckeriscute
    Community Answer
    The second method is going to taste more like movie theater popcorn, but the first will be healthier.
  • Question
    How long will this take to pop?
    Community Answer
    Pop your popcorn until you stop hearing the cracking. Not every kernel will pop. Pop them until most have popped. If you try to pop every kernel, it's possible you could burn some of them.
Ask a Question
      Advertisement

      Things You'll Need

      • Large pot
      • Large bowl

      Tips

      • Some movie theater employees report that the coconut oil they used was red or orange. [15] It's possible this was actually red palm oil, or a low-grade coconut oil not typically available to consumers.
      • You can add all sorts of ingredients to change the flavor of your popcorn. Try these:
        • Hickory smoke flavored salt (instead of regular salt)
        • Dried herbs or paprika powder
        • Freshly grated Parmesan cheese
        • Sugar and cinnamon
        • Chocolate popcorn
        • Any spices that you want to add to the popcorn such as oregano or black pepper
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Pepper mills are not meant to grind salt, as the salt will corrode the steel burrs of the mill.
      • If you want to go down the microwave route and then do all of the extra steps afterwards, do not leave the popcorn in the microwave for too long. Make sure to read the instructions on the bag carefully so that unnecessary problems don't occur.
      Advertisement

      About This Article

      Article Summary X

      To make movie butter for your popcorn, first clarify some butter by melting it over low heat for 30-40 minutes and then straining it through a cheesecloth. Then, set the clarified butter aside and heat up some canola or coconut oil in a pan. Next, make your popcorn in the oil and then add some salt right after it's finished popping. Finally, toss the popcorn in the clarified butter before serving. To learn how to make movie butter using artificial butter flavors, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 378,363 times.

      Did this article help you?

      Advertisement