How to Make Ribbon Flowers

PDF download Download Article
PDF download Download Article

There are many techniques you can use to form cute flowers out of ribbon. Most involve some combination of folding, winding, and cutting, and some are held together by stitches while others can be held together with glue or staples. If you're interested in making your own ribbon flowers, here are a few methods to get you started.

Method 1
Method 1 of 4:

Making a Gathered Ribbon Flower

PDF download Download Article
  1. Watermark wikiHow to Make Ribbon Flowers
    Cut about 12 inches of ribbon. Get creative with the colour and pattern of ribbon. Purchase ribbon at your fabric store, dollar store, or arts and crafts store. Use thicker ribbon to create a more pronounced effect.
  2. Watermark wikiHow to Make Ribbon Flowers
    As if you were inserting curtains onto a rod, weave your needle and thread in and out of the top third of the ribbon. Keep the thread on the spool so you don’t have to worry about running out of thread or if the thread falls off the needle.
    • Continue weaving your needle in and out the top of the ribbon until you reach the end of the ribbon.
    Advertisement
  3. Watermark wikiHow to Make Ribbon Flowers
    Once you are at the end of your ribbon, pull the thread all the way through the ribbon so that it gathers, similar to a curtain. You want it to bunch in order to create a blossoming effect.
  4. Watermark wikiHow to Make Ribbon Flowers
    Make sure you leave some excess thread for you to create a double knot before you cut it from the spool. Gather the ribbon as tightly as you can and double not the thread to hold it in place.
  5. Watermark wikiHow to Make Ribbon Flowers
    Glue the ends of your ribbon together by overlapping one end of the gathered ribbon over the other end, as if you were bending a curtain rod into a circle. Make sure that you apply the glue to the underside of the flower so that it is not visible. Wait for the glue to dry and flatten out your flower.
  6. Watermark wikiHow to Make Ribbon Flowers
    The gathered ribbon should form a circle at the centre of the flower. You may glue a button or two buttons, one on top of the other, at the center of your flower to cover the glued portion of ribbon. You may also glue fake gems or anything else that you feel makes your flower bloom. Get creative.
    • Puff out the outer petals to give your flower the blooming effect. The tighter you scrunch the inner circle of the ribbon, the greater the bloom effect.
    7. Advertisement
Method 2
Method 2 of 4:

Creating a Ribbon Rosette

PDF download Download Article
  1. Watermark wikiHow to Make Ribbon Flowers
    Cut two circles from your felt. Each circle should be about two inches. You may also trace an old spool of ribbon to help you create a smooth circle. Then cut around five feet of ribbon. Be sure to use ribbon with wire in its construction. Use thicker ribbon for a greater blooming effect. Be sure to pull a bit of the wire out of the ribbon and fold it over so that it doesn’t pull through the ribbon when you gather it. [1]
    • Choose felt that complements the colour and pattern of your ribbon. You can buy both at your arts and crafts store or dollar store. The length of the ribbon depends on how large you want to make your flower. For a very large flower use about two arms' lengths worth of ribbon. For a smaller flower, use about half an arm's length of ribbon.
  2. Watermark wikiHow to Make Ribbon Flowers
    Pull the bottom wire from the other side of the ribbon. You should be pulling on the same side that you kinked the wire. Gather the whole ribbon by pulling the wire in one direction and the ribbon in the other. [2]
    • Push as you gather the ribbon to push the gathered bunch of ribbon along the wire.
  3. Watermark wikiHow to Make Ribbon Flowers
    Fold the raw edge of the ribbon down and glue it onto the felt. On the outside of the circle, glue the ribbon so that it covers the edge of the entire circle. Don’t put too much glue. Glue about an inch at a time. [3]
    • To add extra ruffle, gather more ribbon as you glue. You can also pull out more wire if the ribbon is gathered too tightly. This is entirely personal preference.
  4. Watermark wikiHow to Make Ribbon Flowers
    Continue gluing to create a spiral pattern around your circle. Cut off about two inches of ribbon once you reach the center of the flower. This will create the center of the flower. [4]
  5. Place the raw edge of the ribbon down and squish the ribbon. The wire in the ribbon keeps the ribbon in place so fuss all you want until you get the look you like. Once you’re happy, lift up the petals and dab some glue at your desired points to set your look. [5]
  6. Watermark wikiHow to Make Ribbon Flowers
    Glue the ends of the ribbon to keep it sealed. If you are using the flower as part of a bouquet or on a headband, you can also glue the ribbon down onto the stem or headband. [6]
    7. Advertisement
Method 3
Method 3 of 4:

Creating a Grosgrain Pleated Ribbon Flower

PDF download Download Article
  1. Watermark wikiHow to Make Ribbon Flowers
    Use a liberal amount of glue to place a large dot on the middle of the chipboard circle. Have about 18 - 24 inches of grosgrain pleated ribbon ready. [7]
  2. Watermark wikiHow to Make Ribbon Flowers
    Roll the ribbon into a spiral in your hand until you have a half inch spiral. Place this onto the large spot of glue. Press down to make sure it catches and is secure. [8]
  3. Watermark wikiHow to Make Ribbon Flowers
    Add more glue to the chipboard as you continue to spiral the ribbon around the circle. Wrap the ribbon around the chipboard circle until you come to the end of the ribbon. Trim the excess ribbon and tuck the end into the rest of the spiral. [9]
  4. Glue your button in place to create the center of the flower. Glue your bottom at the centre of your spiraled ribbon. Make sure the bloom puffs out towards you. You may also glue leaves at the back of the flower for added effect. [10]
    • You may also cover the chipboard with a piece of matching felt or mist the chipboard piece with paint that matches your ribbon before gluing your ribbon onto it.
    5. Advertisement
Method 4
Method 4 of 4:

Creating a Floral Wire and Tape Ribbon Flower

PDF download Download Article
  1. You may choose ribbon of any width; however, you will need to vary the number of ribbons to adjust for ribbons with thinner or thicker width.
  2. Watermark wikiHow to Make Ribbon Flowers
    If you’re using a thin ribbon, cut about eight pieces that are about six inches long. Arrange the ribbons so that you make a star like shape where each ribbon is layered at the center. Evenly space out these strips and stitch one or two stitches at the center to hold the strips in place.
  3. Watermark wikiHow to Make Ribbon Flowers
    Fold each strip in half and stitch the ends of the ribbon to the center. Continue to do this with each strip to create the petals of your flowers from the folded loops of ribbon.
    • You want to fold the ribbon lengthwise to create two loops at either end of its centre. All loops should meed at the same place, the centre of your flower.
  4. Glue a button at the center of your flower to create the center. You want to use the button to cover where you have glued all the ends of the ribbons together.On the back of the flower, slide floral wire through the stitches. Secure the flower by bending it in half. Use floral tape to wrap the wire and create the stem. Either stitch to secure the button or use hot glue.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What could I use these for?
    Butterfly7398
    Community Answer
    You could use ribbon flowers for decoration or to play with. Try using them to decorate a gift. Get creative.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
  • Question
    Do they work for scrapbooks?
    T. Chinsen
    Top Answerer
    All the examples can be used in scrapbooking. Keep in mind that it will add bulk, and over time it can cause the pages to deform as they are compressed. Choose the flattest design and position evenly on the page to prevent the page warping.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
  • Question
    I saw a white swan made from white ribbon and bendable wire. How would I make that?
    T. Chinsen
    Top Answerer
    Look online for video instructions for a kanzashi ribbon swan. This is the closest description to what you have described.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Get creative with your ribbon flowers. You can use ribbon flowers for bouquets or make decorative brooches from lace ribbon, for instance.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Gathered Ribbon Flower

      • 1 to 2-inch (2.5 to 5-cm) wide ribbon
      • Scissors
      • Sewing needle
      • Thread
      • Embellishment (Button)
      • Glue or Hot glue gun and hot glue

      Ribbon Rosette

      • Wired edge ribbon – 1/2 inch to 1 inch works best
      • Felt – for at least two, 2″ circles
      • Scissors
      • Glue gun and glue

      Grosgrain Pleated Ribbon Flower

      • Pleat Ribbon (in satin or grosgrain 18" - 24" per flower)
      • Strong Quick Dry Adhesive or a Glue Gun
      • Chipboard (make sure the circles are unpunched)
      • Trinket Buttons
      • Leaves

      Floral Wire and Tape Ribbon Flower

      • Ribbon
      • Buttons
      • Floral wire
      • Floral tape
      • Needle
      • Thread
      • Scissors
      • Glue gun


      You Might Also Like

      Easy Ribbon Bows: How to Tie Any Style of Bow
      How to
      Tie an Ornament Bow
      How to
      Make a Bow for a Wreath
      How to
      Curl Ribbon with Scissors
      How to
      Make Ribbon Leis
      How to
      Make a Ribbon Journal
      How to
      Make Flowers with Satin Ribbon (4 Easy Methods)
      How to
      Keep Ribbon from Fraying
      How to
      Make a Ribbon Wreath
      How to
      Make Folded Ribbon Roses
      Advertisement

      References

      1. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      2. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      3. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      4. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      5. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      6. ↑ https://www.cuteasafox.com/2010/03/no-sew-ribbon-rosette-tutorial.html
      7. ↑ https://mayaroad.typepad.com/mayaroad/2010/08/sneak-peek-week-wrap-up-and-flower-tutorial-1.html
      8. ↑ https://mayaroad.typepad.com/mayaroad/2010/08/sneak-peek-week-wrap-up-and-flower-tutorial-1.html
      9. ↑ https://mayaroad.typepad.com/mayaroad/2010/08/sneak-peek-week-wrap-up-and-flower-tutorial-1.html
      1. ↑ https://mayaroad.typepad.com/mayaroad/2010/08/sneak-peek-week-wrap-up-and-flower-tutorial-1.html

      About This Article

      Article Summary X

      To make ribbon flowers, start by weaving a needle and thread through the top third of the ribbon. Once you reach the end, pull the thread all the way through the ribbon to create a blossoming effect. Then, tie the thread in a double knot to hold the blossom in place. Next, glue the two ends of ribbon together and leave your flower to dry before flattening it out. Finally, place a button at the center of your flower to cover the glue. For tips on how to make a ribbon rosette, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 98,783 times.

      Reader Success Stories

      • Anonymous

        May 16, 2017

        "The step which told me to place a button to cover my stitching was the step which appealed to me. I had already ..." more
      Share your story

      Did this article help you?

      Advertisement