PDF download Download Article
Get the inside scoop on your SodaStream model
PDF download Download Article

What’s better than buying a cold soda or sparkling water? Making a batch at home, of course! With your SodaStream machine, the world of carbonated beverages is at your fingertips—but how are you supposed to get started? We’ll walk through the ins and outs of every SodaStream machine model out there, so you can enjoy a refreshing beverage in a matter of minutes.

Things You Should Know

  • Remove the back panel from your machine and insert the CO2 canister. Newer models like the Art and Terra use a pink Quick Connect Cylinder.
  • Fill your SodaStream bottle up to the fill line with cold water and insert it into the machine. Press a button or pull a lever to carbonate the water.
  • Pour the SodaStream beverage or sparkling water essence of your choice into the carbonated water to create a flavorful beverage.
Method 1
Method 1 of 3:

SodaStream Setup

PDF download Download Article

  1. Take the back cover off of the SodaStream and lift up the pink handle attached to the back of the machine. Then, remove the cap from your pink Quick Connect Cylinder and insert it into the machine, starting with the bottom end of the canister. Flip the pink handle down to secure the cylinder in place. [1]
    • This setup method applies to older SodaStream models, like Gaia .

  2. Plug the provided power cord into the bottom of the E-Terra, securing the cord in the provided slot beneath the machine. Then, take off the back panel of the E-Terra and lift up the back handle. Remove the cap from your pink Quick Connect Cylinder and slip it into the back of the machine, inserting the bottom end first. To get your SodaStream up and running, plug the cord into a wall outlet. [2]
    • It takes around 7 seconds for the lights to register on the machine.
    Advertisement

  3. Remove the cap from the SodaStream CO2 cylinder, as well as the back panel from your Fizzi. Starting from the bottom, insert the CO2 cylinder into your machine. While pressing on the canister, turn it to the right (clockwise) to twist it into place. [3]
    • This setup method applies to older SodaStream models, like Source , Power , and Jet . The OneTouch model also uses this setup method, but has an additional power cord that needs to be plugged in.
    • For Genesis models, press the button along the back of the machine to separate and remove the top portion of the machine. Set this top portion of the machine on its side, insert and twist the CO2 cylinder into place, and then reattach/reassemble the machine. [4]
  4. Advertisement
Method 2
Method 2 of 3:

Carbonating Your Water

PDF download Download Article
  1. Fill up the SodaStream bottle with cold water to the fill line. Tap or filtered water works fine for this—what matters most is that it’s cold, so you can enjoy it right away. [5] Don’t overfill the bottle, or else it’ll overflow during the carbonation process.
    • Some SodaStream models (like the E-Duo) use special carafes rather than bottles.
    • Warning: Never carbonate your water with syrup in the bottle. This will cause it to overflow and create a sticky mess.
  2. Newer SodaStream models have a built-in Snap-Lock to help you insert the carbonation bottle, while other models have a slightly different setup process. Here’s a quick rundown based on your SodaStream model:
    • Terra, E-Terra, Art, Fizzi, OneTouch, Source, and Power: Pull out the Snap-Lock so it’s positioned at a 45-degree angle. Slide the bottle all the way up the Snap-Lock, and then press the Snap-Lock back so it’s vertical again. The bottle should be held steady by the machine. [6]
    • E-Duo and Aqua Fizz: Glide the lever on the front of your machine all the way to the right to unlock the carbonating flask, a silver canister that tilts forward at an angle. Slip the carafe into the flask, push the flask back into place, push the top part of your machine back down, and then glide the lever back to the left to secure everything. [7]
    • Gaia, Genesis, and Jet: Twist the water bottle clockwise to secure it into the machine. Some models, like Gaia, may click to indicate a solid connection. [8]
  3. Some SodaStream machines carbonate with the press of a button, while other machines have slightly different carbonation processes. Here’s a quick look at how to operate each model:
    • Terra, Fizzi, and Genesis: Press the top button firmly in 1-2 second bursts. Press it once for mild fizz, 3 times for moderate fizz, and 5 times for major fizz. [9]
      • For the Fizzi model, press the button in 2-second bursts. [10]
    • Art: Pull down the lever for 1 second and then let it go. To get a moderate amount of fizz, do this 3 times; for major fizz, do this 5 times. [11]
    • E-Terra, E-Duo, and OneTouch: Tap one of the 3 top buttons that correspond with the amount of fizz you want (1 dot equals mild fizz, 2 dots equal moderate fizz, 3 dots equal major fizz). The light flashes as the machine carbonates the water; once it stops, your water is ready to go. [12]
    • Aqua Fizz, Gaia, and Jet: Firmly press the button on the top of the machine in 1-second bursts. Press it 1 time for mild fizz, 3 times for moderate fizz, and 4 times for major fizz. [13]
    • Source and Power: Push down on the carbonating block in 1-second bursts, using the LED indicators on the front of the machine as a guide. Press until the single-drop LED icon lights up to get mild fizz; until the double-drop LED icon lights up to get moderate fizz; and until the triple-drop LED icon lights up to get major fizz. [14]
      • For Power models, press the button continuously rather than pressing it in bursts. [15]
  4. Once you’ve added carbonation to your water, pull the bottle out of your machine’s lock mechanism. Depending on your model of SodaStream, either twist the bottle or pull it out toward you to unlock it. Here’s a quick run-down:
    • Terra, E-Terra, Art, Source, Power, OneTouch, and Fizzi: Pull the bottle up to a 45-degree angle and slide it out. [16]
    • E-Duo and Aqua Fizz: Slide the lever to the right, wait for the carbonation head to lift up, and then remove the bottle. [17]
    • Gaia: Unscrew the bottle and remove it from the machine. [18]
    • Jet: Push on the machine’s tilt lever and unscrew the bottle. [19]
    • Genesis: Guide the bottle in a forward direction and unscrew it from the machine. [20]
  5. Advertisement
Method 3
Method 3 of 3:

Adding Flavor

PDF download Download Article

  1. Choose which flavor of soda you’d like to put in your carbonated water. Unscrew the lid on the syrup bottle and flip it over to use as a measuring cup. Pour the syrup into the cap, using the indicator lines for reference—the bottom line provides a lower sweetness level, while the upper lines offer a higher sweetness level. Then, pour the syrup into the water, replace the cap, and lightly shake the bottle to incorporate the flavoring. [21]

  2. Measure out a 3 4   tsp (3.7 mL) of bubly drops and dump them directly into your carbonated water. Then, secure the cap and give the drink a light shake to mix everything together.

  3. For every 2 3   c (160 mL) of water, stir in 2 US tbsp (30 mL) of drink mix. [22]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I get it really fizzy? My soda is not very carbonated.
    Community Answer
    Press the carbonation button more times! My SodaStream came with a little sticker on top advising that the best carbonation was three buzzes (the buzzes come a little while after you push the button) but...you can press as many times you want.
  • Question
    What if the bottle that came with it doesn't screw in?
    Community Answer
    My SodaStream has a snap lock system. Just push the bottle in - no screwing is needed.
  • Question
    How do I make it sweeter?
    Community Answer
    Add more flavoring, sugar, honey, or any other sweetener you like.
See more answers
Ask a Question
      Advertisement

      Tips

      • SodaStream beverages last for up to 1 week when refrigerated in a SodaStream bottle. [23]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement
      1. https://support-us.sodastream.com/hc/en-us/articles/4420024688027-How-do-I-use-my-Fizzi-
      2. https://support-us.sodastream.com/hc/en-us/articles/4420062288283-How-to-use-my-SodaStream-ART-Sparkling-Water-Maker
      3. https://www.youtube.com/watch?v=RJaY_fBali4&t=1m53s
      4. https://support-us.sodastream.com/hc/en-us/articles/4420030779291-How-to-use-my-AQUA-FIZZ-
      5. https://support-us.sodastream.com/hc/en-us/articles/4420016937371-How-to-use-my-SodaStream-Source-Sparkling-Water-Maker
      6. https://cdn.shopify.com/s/files/1/2798/7364/files/POWER_ENGLISH_USA.pdf?v=1616415430
      7. https://support-us.sodastream.com/hc/en-us/articles/4419997677851-How-to-Use-my-SodaStream-TERRA-Sparkling-Water-Maker
      8. https://www.youtube.com/watch?v=RJaY_fBali4&t=2m12s
      9. https://support-us.sodastream.com/hc/en-us/articles/13292241403419-How-to-Use-the-SodaStream-GAIA-Sparkling-Water-Maker
      10. https://support-us.sodastream.com/hc/en-us/articles/4420017215899-How-do-I-use-my-Jet-
      11. https://support-us.sodastream.com/hc/en-us/articles/4420012859547-How-to-use-my-SodaStream-Genesis-Sparkling-Water-Maker
      12. https://support-us.sodastream.com/hc/en-us/articles/4420071845531-How-do-I-add-flavor-to-sparkling-water-I-made-using-my-Sparkling-Water-Maker-
      13. https://support-us.sodastream.com/hc/en-us/articles/4420071845531-How-do-I-add-flavor-to-sparkling-water-I-made-using-my-Sparkling-Water-Maker-
      14. https://support.sodastream.com/hc/en-us/articles/4409061967899-How-long-will-my-bubbles-last-when-stored-in-the-fridge-

      About This Article

      Article Summary X

      To make soda in a SodaStream machine, you need to carbonate the water and then add flavoring. Start by removing the plastic cap from the carbonator that comes with your machine. Then, insert the carbonator into the back of your soda machine and screw the top of the canister into the top. Take the clear plastic carbonating bottle and fill it with cold water to the fill line. Attach the bottle to the lock on the front of the machine and then gently push the bottle into position so it’s upright. Press the carbonating button in short bursts to add carbonation to the bottle. Remove the bottle and pour a capful of SodaMix into it to flavor it. Screw the cap on the bottle and gently shake it for 10 seconds to fully combine it. For tips about how to watch the LED lights to indicate how carbonated the water is, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 337,189 times.

      Reader Success Stories

      • Dori

        May 30, 2018

        "Even though it has the instructions, the visual help was wonderful. Ready to do my first fizzy drink, thanks!"
      Share your story

      Did this article help you?

      Advertisement