How to Craft Wax Hands at Home

PDF download Download Article
Melt, cast, and customize your very own wax sculptures or candles
PDF download Download Article

A casted wax hand makes an elegant and even mysterious decoration. Add a wick, and you've got yourself a bespoke candle that adds some mystique to any room! We're here to show you how to melt the wax and make a hollow sculpture or a solid, sturdy candle as a fun DIY craft.

Things You Should Know

  • Make a double boiler by placing a small bowl over a large pot of heated water. Crumble beeswax or paraffin wax into the bowl and heat it until it's melted.
  • Wait until the wax is just cool enough to touch, then submerge a lotion-soaked hand in the wax repeatedly, until your hand it coated in wax.
  • Carefully and gently remove the wax from your hand, retrieving it in one piece. Harden it by dipping it in cool water.
Section 1 of 3:

Melting the Wax

PDF download Download Article
  1. This process is not too dangerous if an adult follows these instructions precisely. Skipping any of the steps below greatly increases the risk of fire, especially if you heat the wax directly instead of using the double boiler setup described here.
    • If the wax does ignite, extinguish the fire with baking soda or a chemical fire extinguisher. Never add water or a water-based fire extinguisher to a wax fire, as this causes an explosion.
  2. You only need about 2 inches (5 centimeters) of water. This will be the lower half of a makeshift double boiler.
    • If you already have a double boiler, fill the lower pan with water and skip ahead to "Add the wax."
    Advertisement
  3. Find a metal cookie cutter or metal jar lid, and place it on the base of the pan, underneath the water.
  4. Choose an aluminum or steel pan, and place it on top of the metal stand. Avoid other metals, which can discolor or react with the wax, and non-stick pans, which are very difficult to clean wax from.
    • Don't use this pan for food again, unless you're using food-grade paraffin wax or beeswax. Even a food-safe wax may leave residue that affects the taste of your food, but it won't harm you.
  5. You can use beeswax or paraffin wax from a hobby retailer, or remove the wick from used candles and use them. Crumble or cut the wax into small pieces so they melt faster, then throw them into the smaller pan.
    • Make sure there's enough wax to cover your hands.
  6. You can shave crayon wax into the mix to add color, or purchase wax dye or candle dye from a hobby store. If you're using a dye product, follow the instructions on the label.
    • It's best to assume that any color addition is not safe for food, even if it is labeled non-toxic. In other words, if you add color here, don't use this pan for cooking.
  7. Before you begin heating the wax, read over one of the two methods below and gather any materials you need. There are two types of wax hands you can make:
    • Hollow wax hands are easy to make, and the only additional material you need is a container of water.
    • To make a solid wax hand you can use as a candle, you'll need a bucket of damp sand, a dowel, and a candle wick. Read the instructions below for preparation before you start heating the wax.
  8. Place the double boiler set up on the stovetop and heat over medium heat. Stir slowly and constantly using a steel or aluminum utensil. If the wax is not food-grade, this utensil will also not be suitable for cooking.
    • This can take quite a while, especially if the wax is in large chunks.
    • Never leave wax unattended while it's being heated.
  9. Take the pan off the heat and continue on to one of the methods below.
    10. Advertisement
Section 2 of 3:

Making Hollow Wax Hands

PDF download Download Article
  1. A bucket works well, since you'll need to dip your whole hand into it. Fill it up most of the way, but leave room at the top to avoid spilling.
    • You can add food coloring to the water to color your wax hands. This only has a minor effect, but may be a better coloring option if you don't want to use non-food-safe dyes or crayons in your wax-heating pan.
  2. Follow the instructions above to melt the wax, then wait for it to cool. Touching hot wax can cause serious burns, so it's best to use a candy thermometer or candle-making thermometer to be sure the wax is safe. The wax is ready once it has cooled to 110 degrees Fahrenheit (43ºC) or slightly lower.
    • If a solid film has formed over the wax, return the pan to heat again to melt it, then let it cool again.
  3. Cover your hand and wrist with the lotion, but do not rub it into your skin. You should still be covered with white smears of lotion. This will make it easy to slip the wax hands off without breaking them.
  4. Dip one hand in the bucket of water up to your wrist. Shake the excess water off your hand.
  5. Briefly dip the same hand in the warm wax and pull it out again. To make removal easy, only dip up to the base of your hand, before it starts narrowing to your wrist. [1]
    • Choose a hand shape before dipping and keep your hand in that position for the rest of this method.
  6. Dip your hand back and forth between the water and wax. Each time, you'll add another layer of wax to your hand. An average-sized wax hand is ready after eight dips, but a small child's hand may be ready after three to four.
    • End with a water dip. This will help adhere the final layer of wax to the layers beneath it.
  7. Gently loosen the wax hand by sliding your un-waxed pinky finger under the wrist. Once it starts to loosen, dip it under the water level to help it glide off. [2]
    • If the hand is stuck, poke a hole in the wax fingertips with a pencil tip to release the suction.
  8. Dip it in water one last time to help the wax harden. While the wax is still soft, use your fingers to smooth out any bumps or tears. Once the wax is air-dried, the job is done.
    • Optionally, you can dip the wrist end of the hand into the warm wax, then fold the edges inward to make a sturdy base for the hand to stand on. This may not work if the wax wrist is torn or short.
    9. Advertisement
Section 3 of 3:

Making a Wax Hand Candle

PDF download Download Article
  1. Mix water into sand bit by bit, until it is damp but firm. It should stick together enough to hold shapes.
    • You can purchase sand at a hardware store or home improvement store.
  2. Press your fingers and hand into the sand in the hand shape of your choice. Carefully pull your hand out again, without making any extra holes. You should be left with a hollow in the sand that holds the shape of your hand.
  3. Tie a candle wick or braided cotton string onto a dowel, and lay the dowel over the bucket. Adjust the wick so it hangs down into the hollow left by your hand.
    • If you want the candle to burn with the fingers pointing upward, the candle wick needs to touch the bottom of the hole.
  4. Follow the instructions above to melt the wax. As soon as it has melted completely, carefully pour the wax into the hollow left by the sand.
    • Wear gloves when pouring hot wax.
  5. Depending on the type of wax and the size of your hand, this can take anywhere from 2 to 8 hours, but leaving it overnight is a good idea just in case.
  6. Once the wax is set, you can dig out the sand around it, or place a plastic bag over the mouth of the bucket and slowly tip the whole thing over. You may need to trim the wax hand if it's seeped out of the original hollow, or scrape it slightly to uncover the wick. Once that's done, your hand candle is complete.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    For the melting process, can I use a Scentsy pot to warm the wax, then transfer it to the mold, or would that not work?
    Joseph Madder
    Community Answer
    If it melts the wax so it is entirely liquid, then it should work just fine.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 1
  • Question
    How do I make the temperature 40-50 Celsius?
    Community Answer
    Just increase the flame under the pot and let it sit longer. Be sure to keep stirring it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How do I make the color in wax hands?
    Joseph Madder
    Community Answer
    Buy some food coloring from a grocery store and add it in slowly. Remember, it will usually look lighter when it is dry.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • To clean hardened wax off pans and utensils, heat it up again, then wipe it off once it's warm and gooey, but not too hot to touch. Alternatively, put it in the freezer and pop it off once frozen. [3]
        Thanks
        Helpful 0 Not Helpful 0
      • Wax hand candles will turn out best if a "hard" paraffin wax is used, with a high melting temperature. Softer waxes can stick to the sand and alter the surface texture.
        Thanks
        Helpful 4 Not Helpful 2
      • To make your hollow wax hands last longer, fill them with casting plaster. This can be purchased from a hobby retailer.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Aluminum or steel pot
      • Larger pot (any metal)
      • Water
      • Bucket
      • Baking soda or chemical fire extinguisher (just in case)
      • Paraffin wax or used candles
      • Candy thermometer or candle-making thermometer
      • Stove
      • Aluminum or steel stirring utensil
      • Hand lotion (for hollow wax hands)
      • Sand (for candle hand)
      • Dowel (for candle hand)
      • Candle wick (for candle hand)


      You Might Also Like

      How to
      Sculpt Clay
      How to
      Sculpt a Face
      How to
      Make a Soap Carving
      How to
      Make a Sculpture
      How to
      Make Mannequin Heads
      How to
      Scrimshaw
      How to
      Sculpt
      How to
      Sculpt With Concrete
      How to
      Make a Latex Mold
      How to
      Make a Rubber Mold
      How to
      Life Cast
      How to
      Use a Chisel
      How to
      Sculpt Using Polymer Clay
      How to
      Mix Plaster for Sculpture
      Advertisement

      References

      1. ↑ http://www.galileo-camps.com/blog/entry/diy-make-a-wax-hand
      2. ↑ http://www.galileo-camps.com/blog/entry/diy-make-a-wax-hand
      3. ↑ http://chickensintheroad.com/house/crafts/so-you-want-to-make-candles-basic-supplies-to-get-started/

      About This Article

      Article Summary X

      To make a hollow wax hand, add 2 inches of water to the lower part of a double broiler and place on the stove at medium heat. Crumble small pieces of wax into the top pan and stir until the mixture is totally melted. Then, remove from the heat and wait until the wax has cooled to 110 °F. Dip your hand in a bucket of cool water to protect it, then dip it in the pan of wax so that it's completely covered. Immediately remove your hand from the pan and place it back in the bucket of cold water. Repeat this process about 8 times, or until your wax hand is thick enough. To learn how to make a solid wax hand candle, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 233,826 times.

      Reader Success Stories

      • Anonymous

        Apr 9, 2018

        "It helped by telling me how to create a wax hand."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement