How to Make a Brick Kiln

PDF download Download Article
Guide to making and using an easy DIY brick kiln for firing pottery
PDF download Download Article

Brick kilns have been used for thousands of years to create pottery, tiles, and other common objects. Whether of simple or complex design, all brick kilns use a wood fire to harden objects inside. You can easily make brick kilns once you’ve determined the needed dimensions and identified a flat clear area outdoors. By laying brick to build the kiln’s walls and covering it with a piece of iron or ceramic fiber for its roof, you can start firing your own pottery in no time.

Things You Should Know

  • Make a base for the kiln on a flat surface using bricks packed tightly together.
  • Stack bricks around 3 sides of the base to make the walls. Leave one side open so you can load the kiln.
  • Place a corrugated iron sheet on top of the brick walls for the roof.
Part 1
Part 1 of 3:

Kiln Dimensions

PDF download Download Article
  1. The size of the kiln depends on what you plan to fire in it. You can make a small or large kin depending on what kind of pottery you make. If you plan to fire multiple pieces at once, write down the combined width and length of those pieces. Then multiply each figure by 1.5 to determine the interior measurements of the kiln. [1]
    • For example, if you wish to fire 4 pieces at once that are each 1 ft (0.30 m) tall, 1 ft (0.30 m) wide, and 1 ft (0.30 m) long, multiply 1 ft (0.30 m) by 1.5 and the combined width and length (4 ft (1.2 m) and 4 ft (1.2 m)) by 1.5 to determine the depth of the kiln.
    • If you’re producing many pieces, consider putting multiple shelves in your kiln. Using shelves, you can build a taller and narrower kiln that can hold more pieces. Depending on the height, you may need to build a metal frame to bolster the walls. [2]
  2. There are 2 standard sizes of firebrick, one 9 in (23 cm) by 4.5 in (11 cm) by 3 in (7.6 cm) and the other 9 in (23 cm) by 4.5 in (11 cm) by 2.5 in (6.4 cm). Add the height of the firebrick to the interior height of the kiln. [3]
    • For example, if your kiln’s interior was 9 ft (2.7 m), add either 3 in (7.6 cm) or 2.5 in (6.4 cm) (depending on which size brick you bought) to determine the exterior height.
    Advertisement
  3. Since the kiln will have 3 walls – each 1 brick wide, add double the brick width to the interior length and interior width to determine these exterior dimensions. In each case, add 8 in (20 cm) to your interior length and width. [4]
    • If you estimate your kiln’s interior length is 5 ft (150 cm) and interior width is 9 ft (270 cm), by adding 8 inches to each you’ll need to build a kiln 5.66 ft (173 cm) by 9.66 ft (294 cm).
  4. Then find the volume of the interior of the kiln by multiplying the length by the width by the height of the interior. Subtract the interior volume from the exterior volume. Divide the difference by the volume of 1 brick. This dividend is the number of bricks you’ll need. [5]
    • Make sure you purchase a firebrick with the same dimensions you used to calculate the volume.
  5. A kiln with a square or rectangular shape will always have a greater volume than a cylindrical kiln of the same length. Many people produce cylindrical kilns for aesthetic reasons. However, these kilns are more complex to build and more expensive, as curved firebricks cost more than square ones. [6]
    • If you want to build a cylindrical kiln, examine the land you have available to see if you have the space to build one with the same interior depth as a square or rectangular kiln. [7]
  6. Look for a space clear of vegetation that can accommodate for your kiln size. Make sure you can legally burn wood in this area, and that it is at least 15 ft (4.6 m) away from any nearby buildings. Gather your building materials and assemble them near the kiln site. [8]
    • When clearing the space of vegetation, make sure you pull up any plants or weeds by their roots.
    • If the space is not wide or long enough for your proposed kiln, consider reducing the length and width and increasing the height proportionally by adding kiln shelving.
  7. In addition to firebricks, buy a corrugated sheet of iron the length and width of your kiln for a roof. If you can’t find corrugated iron, a sheet of ceramic fiber can make an effective substitute. [9]
    • You can typically buy firebricks for between $0.50 and $0.75 per brick. Firebricks are usually sold in pallets, often in multiples of 100 or 1,000.
    8. Advertisement
Part 2
Part 2 of 3:

Making the Kiln

PDF download Download Article
  1. You will not be using mortar, as mortar can expand and crack with each kiln firing, so make sure you pack the bricks tightly next to each other. Lay enough bricks to cover an area equal to the length and width of your kiln. [10]
    • These bricks will not only serve as your base layer, but also a shelf for your pottery.
  2. Lay these bricks flat and flush with each other, with no gaps in between. Stack them on top of each other until you’ve built a structure as high as you estimated your kiln should be. Leave one entire side open so that you can place pottery inside the kiln. [11]
    • For added stability, add each layer of bricks on top of the layer beneath it such that each brick’s end is perpendicular with the center of the 2 bricks underneath it. Repeat this process until you have built the kiln’s walls to their required height.
    • When you have completed laying all the bricks, go to the wall that faces the wind direction. Remove a section of bricks 3 bricks high from the top of that wall. This gap will serve as your vent, allowing the smoke from the fire out and keep the kiln from overheating.
  3. This sheet will serve as your kiln’s ceiling and keep the heat in to fire and harden objects inside. Weigh the iron down with bricks on each side to keep it in place. Otherwise, when you light the kiln, the force of the heat may cause the ceiling to pop off. [12]
    • If your sheet is made of cast iron, it is prone to rust easily. Make sure you remove it from the kiln and cover it when not in use to prevent damage from rain.
    4. Advertisement
Part 3
Part 3 of 3:

Using the Kiln

PDF download Download Article
  1. Coat the base with approximately 4 in (10 cm) – of sawdust. When you fire the kiln, the sawdust will give the pottery a polished finish. [13]
    • If your kiln includes multiple levels of shelving, go to the kiln’s opening and place approximately 4 in (10 cm) of sawdust on each level of shelving.
  2. Lay each piece on the bricks and space them evenly from each other and the walls. Make sure there is at least 1 in (2.5 cm) between each piece for best results. [14]
    • Individual pottery pieces should not touch each other. If you are unable to load the pottery without some pieces touching, place half of them at the kiln for an initial firing. Fire the rest later.
  3. Place 1 to 2 clumps of newspaper around the pottery. Fill the remaining gaps between the newspaper and the kilns walls with firewood. Make sure there are no gaps between the walls, firewood, newspaper, and pottery. [15]
    • As you grow more experienced with your kiln, experiment with different types of sawdust shavings, as well as where you place the sawdust, which will result in different finished effects.
  4. Crumple up and light a sheet of newspaper and place it in the kiln. The fire may burn up to 72 hours. It will also take as many as 12 hours or longer to cool down, so be very careful when examining your pottery. [16]
    • When stoking the fire or otherwise approaching the kiln, use heat-resistant gloves and protective gear, such as goggles to protect your eyes from the smoke.
    • As the fire consumes the sawdust, the upper half of the kiln will begin to cool. The slower the fire burns, the darker the pottery will be. To lighten the pottery, stoke the fire and add additional fuel – newspaper and wood – if the fire appears to be burning slowly.
  5. Clean the pottery with a soft cloth and then apply a layer of wax to make them shine. Your pottery may have glowing markings on it – a result of resin from the sawdust. These can be removed using a kitchen scourer. You can then paint your pieces with glazes. [17]
    • If you’d like your pieces to have a matte – or non-glossy finish, do not apply wax. Painting your pieces with oxide stains is the best approach to preserving your matte finish.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the significance of the chimney length in a brick kiln oven?
    Tony Hoang
    Landscaping Manager
    Tony Hoang is a Landscaper and the Principal at H&J Landscaping & Concrete Contractor in Newark, CA. With over six years of experience, he specializes in designing the perfect concrete driveways & backyard patios for homes. H&J Landscaping & Concrete Contractor is a 4.5-star business on Yelp.
    Tony Hoang
    Landscaping Manager
    Expert Answer
    The length of the chimney is quite important for controlling the oven draft in a brick kiln. Essentially, a longer chimney will create a greater draft through the oven. With more draft, the oven can reach higher temperatures. So by designing the chimney to an optimal height, the oven's heat can be properly regulated for efficient firing of bricks. The chimney really acts as the engine that drives airflow through the kiln, thereby allowing fine control over the burning process.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 9
  • Question
    What is the price of 1 brick?
    Community Answer
    It varies, bricks come in all sizes and materials. It is also dependent upon how many you want to purchase. An estimated price of $0.20 would be that. Bricks are typically sold as either $/100 or $/1000 and by the pallet. The pallet depends upon the size and manufacturer.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 8
  • Question
    Can we build our wood kiln with cement instead of clay?
    Community Answer
    Cement will crack from the heat. Clay bricks are best because they can withstand extremely high temperatures.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 7
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Wash your kiln between firings. You can buy kiln washes – mixtures of alumina hydrate and kaolin, at ceramics stores. Use it on kiln shelves and the interior of kiln walls to lengthen the life of your kiln. [18]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Cloth
      • Corrugated Iron Sheet or Ceramic Fiber
      • Dust Mask
      • Firebricks
      • Flat Outdoor Space
      • Kiln Shelving (Optional)
      • Kiln Wash
      • Matches
      • Newspaper
      • Sawdust
      • Wax
      • Wood

      You Might Also Like

      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Drill Through Granite
      How to
      Remove Efflorescence from Brick
      How to
      Clean Soot from Brick
      How to
      Make Bricks from Concrete
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about gardening, check out our in-depth interview with Tony Hoang .

      References

      1. ↑ https://kilnfrog.com/pages/what-shape-size-and-depth-do-i-need
      2. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      3. ↑ https://kilnfrog.com/pages/what-shape-size-and-depth-do-i-need
      4. ↑ https://kilnfrog.com/pages/what-shape-size-and-depth-do-i-need
      5. ↑ https://www.traditionaloven.com/articles/84/firebricks-heavy-dense-fire-clay-bricks
      6. ↑ https://kilnfrog.com/pages/what-shape-size-and-depth-do-i-need
      7. ↑ https://kilnfrog.com/pages/what-shape-size-and-depth-do-i-need
      8. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      9. ↑ https://www.traditionaloven.com/articles/84/firebricks-heavy-dense-fire-clay-bricks
      1. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      2. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      3. ↑ https://www.theguardian.com/lifeandstyle/2006/jun/24/familyandrelationships.family2
      4. ↑ https://www.theguardian.com/lifeandstyle/2006/jun/24/familyandrelationships.family2
      5. ↑ https://www.theguardian.com/lifeandstyle/2006/jun/24/familyandrelationships.family2
      6. ↑ https://www.theguardian.com/lifeandstyle/2006/jun/24/familyandrelationships.family2
      7. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      8. ↑ https://www.homesteadpottery.com/articles-homestead-pottery/building-a-wood-fired-kiln/
      9. ↑ https://ceramicartsnetwork.org/daily/article/Kiln-Wash-Simplified

      About This Article

      Thanks to all authors for creating a page that has been read 179,123 times.

      Reader Success Stories

      • Pamela Mkhwanazi

        Jul 3, 2019

        "I am an aspiring potter and am very interested in learning more about pottery. This article is helping me more on ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement