Download Article
Make a festive and tasty lei for graduations, parties & more
Download Article
While the usual style of leis is made from flowers or multi-colored ribbon, the concept of a lei can be transferred to other objects. The use of candy to make a lei is a fun way to reward younger children at parties, school graduations, special events and the like with a tasty treat that they can wear. You can make a simple, garland-like candy lei with cellophane, or you can make a fuller candy lei using individually-wrapped candies.
How do you make a candy lei?
- Lay out a piece of cellophane about measuring 40x6 inches (102x15 cm).
- Arrange your candy in a single row down the center of the cellophane.
- Fold and roll the cellophane over the candy, keeping 1 inch (2.5 cm) between pieces.
- Tie colorful pieces of ribbon around the cellophane between the candy pieces.
- Tie the ends of the cellophane wrap with a large piece of ribbon to finish.
Steps
-
Roll out a piece of cellophane to 35 to 40 inches (88.9 to 101.6 centimeters) long. and 6 inches (15.24 centimeters) wide. You can also use plastic wrap instead, but you will have to be extra-careful so that it doesn't fold in on itself or wrinkle.- Clear cellophane would be best. If this is for a graduation ceremony, however, consider using one of the school colors instead.
-
Arrange your candy down the center of the cellophane. [1] X Research source Leave about 1 inch (2.54 centimeters) of space between each candy bar. You should also leave about 1 inch (2.54 centimeters) of space between the first/last candy pieces and the short ends of the cellophane.- Small candy bars, such as the kind sold during Halloween, work best for this.
- If you are using small candies, such as Hershey's Kisses or Starburst, you can pile them in groups of 3 to 4. If you are using larger candy bars, arrange them in groups of one. [2] X Research source
Advertisement -
Fold the cellophane onto the candy, then start to roll the candy towards the other end of the cellophane. [3] X Research source Try to keep the 1-inch (2.54-centimeter) wide spaces between the candy. If you need to, use your finger to separate the candy after you have finished rolling it up in the cellophane.
-
Cut 6 to 8-inch (15.24 to 20.32-centimeter) long pieces of curling ribbon. [4] X Research source You can also use satin ribbon or sheer ribbon instead. If this is for graduation, consider using the school's colors.
-
Tie each ribbon around the space between the candy. You can do a simple double-knot, or you can tie the ribbon into a fancy bow.
- If you are using curling ribbon, consider curling the ends. You can do this by pulling the ribbon between your thumb and the pair of scissors.
-
Over lap the two ends of the lei, then tie a ribbon between the two candies. Be sure to tie the ribbon into a tight, double knot. If you want, you can tie the ends off into a bow, or curl them instead.
-
Finished.
Advertisement
-
Get some individually-wrapped candy. The candy that works best for this method are candies that are wrapped in cellophane, with the ends twisted shut. Great examples include Werthers, Jolly Ranchers, and saltwater taffy. -
Cut lots of 6-inch (15.25-centimeter) long pieces of curling ribbon. You can use just one color or lots of colors. If this is for a graduation ceremony, you could even use the school's colors. You will need one piece of ribbon for each candy. [5] X Research source -
Tie a piece of 6-inch (15.25-centimeter) long curling ribbon to one end of the candy. Place a piece of ribbon behind the wrapper, right between the candy and the twisted part. Make sure that the ribbon is centered, then pull the ends of the ribbon towards you and tie it into a tight, double-knot.
-
Keep tying the ribbon to the candy until you are all out of candy. Don't worry if the ribbon pieces look too long. You can always cut them down later.
-
Cut a 42-inch (106.68-centimeter) long piece of 2-inch (5.08-centimeter) wide ribbon. The color of the ribbon does not matter, because it will be covered by candy in the end. It might be a good idea to use a color that matches your candy, however, in case there are any gaps. [6] X Research source
-
Start tying the candy to the 2-inch (5.08-centimeter) wide ribbon using tight, double-knots. Alternate the sides you tie the candy onto, and gently scrunch the candy together every so often. This will give you an extra-full lei. [7] X Research source Leave about 2 inches (5.08 centimeters) at each end of the ribbon so that you can tie it together. How full your lei turns out depends on how much candy you add.
- Consider tying a knot at the end of your 2-inch (5.08-centimeter) wide ribbon to keep the candy from sliding down while you work.
-
Tie the ends of the wide ribbon together to form a loop. Be sure to use a tight, double-knot, and that there are no gaps between the knot and the candy.
-
Consider trimming or curling the ends of the curling ribbon. You can leave the curling ribbon as they are, or you can trim them down. You can also curl them slightly by running them between your thumb and a pair of scissors.
-
Finished.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- You can make smaller wreaths for children.Thanks
- It is common practice to hug the person you are giving the lei to.Thanks
- If you do not wish to use candy, there are many other things you could try: money, small toys, and gift cards, just to name a few. Be sure the gift you select is appropriate for the age of the recipient.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you choose to put candy in the lei, please be considerate of the recipient's possible food allergies.Thanks
- Be advised that food in the lei might not be eaten, and money might not be spent. These leis are usually given for important, sentimental events and might be saved as mementos.Thanks
- Do not allow small children to play with the cellophane wrapping.Thanks
- Be careful with the scissors.Thanks
Advertisement
Things You'll Need
Making a Simple Candy Lei
- Curling ribbon
- Cellophane
- Candy
- Scissors
Making a Full Candy Lei
- Curling ribbon
- 2-inch (5.08-centimeter) wide ribbon
- Cellophane
- Candy
- Scissors
References
- ↑ http://www.thecraftpatchblog.com/2013/01/candy-bar-lei-tutorial.html
- ↑ https://www.ohnuts.com/blog/how-to-make-candy-leis/
- ↑ http://www.thecraftpatchblog.com/2013/01/candy-bar-lei-tutorial.html
- ↑ https://www.ohnuts.com/blog/how-to-make-candy-leis/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
About This Article
Article Summary
X
To make a simple candy lei, start by rolling out clear cellophane that’s 35 to 40 inches long and 6 inches wide. Next, place small candy pieces down the center, leaving 1 inch of space between each. Then, fold the cellophane onto the candy and roll the candy towards the other end. When you reach the other end, use 6 to 8 inch ribbon strips to tie double knots around the spaces between each candy. Finish by tying a ribbon between the 2 ends of the lei. For more tips, including how to make a lei with larger candy, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 292,584 times.
Reader Success Stories
- "I'm making this for my cousin's graduation. I think he'll like it."
Advertisement
"I'm making this for my cousin's graduation. I think he'll like it."
