How to Make a Cat Bed from an Old Sweater

Co-authored by wikiHow Staff

Last Updated: February 13, 2024 Approved

Does your kitty keep sleeping on your sweater? If so, why not turn that sweater into a new bed for her? If you don't want to cut and sew the sweater, you could always use an old one, or buy one from the thrift store instead. If you have a whole stash of sweaters, then why not turn them into a patchwork cat pillow instead?

Method 1

Method 1 of 2:

Making a Simple Cat Bed

Download Article

1
Find a soft sweater. A sweater that your cat already loves to sleep on would be a great choice for this. You can also use any old sweater, or even a brand-new one, as long as you don't mind cutting and sewing it back up. )
- You can sew this sweater using a sewing machine and matching thread, or by hand using a yarn and a yarn needle.
- If the sweater has a turtleneck, cut it off first.
For a nicer finish, turn the sweater inside-out first, then sew straight across the top of the sweater, just below the neckline. Turn the sweater right-side-out when you are done. ^{[1]
X
Research source}

Advertisement
Use a ruler and a tailor's chalk to draw a horizontal line across the front of your sweater. Make sure that the line is level with the bottom of each armhole. ^{[2]
X
Research source}
4
Stuff the arms of the sweater with polyester fiberfill. Make sure that the stuffing meets the body of the sweater, where the neckline used to be. Use enough stuffing to fill the arms, but not so much that they stretch out and become bulky. ^{[3]
X
Research source}
- Fill one arm all the way to the cuff, and the other just below.
- You can also roll up a baby blanket or quilt batting, and use that instead. ^{[4]
  X
  Research source}
Take the arm that you filled all the way to the edge, and tuck it inside the other arm. You want the cuffs to overlap each other. ^{[5]
X
Research source}
Thread a yarn needle with a piece of yarn. Sew the arms together along the edge of the visible cuff. You can use a matching yarn color for this, or a contrasting one. ^{[6]
X
Research source}
7
Cut the excess material off of the bottom of the sweater, if needed. Spread the sweater onto a flat surface. Set the looped arms on top, so that the cuff is facing the bottom. Trace around the outer edge of the looped arms with tailor's chalk. Cut along the line that you drew. ^{[7]
X
Research source}
- Make sure that you cut through both layers.
You don't have to do this, but it will make the bed more comfortable for your cat. You can use more polyester stuffing/fiberfill, or you can use a pillow. If you are using a pillow, make sure that it is the same dimensions as the sweater's body. ^{[8]
X
Research source}
9
Sew the sweater to the arms using a whipstitch. Flip the sweater over. Sew the body of the sweater to the looped arms using a yarn needle, yarn, and a whipstitch. Start at one armpit and end at the other. ^{[9]
X
Research source}
- You can use a matching yarn color for this, or a contrasting one.

Method 2

Method 2 of 2:

Making a Felted Patchwork Pillow

Download Article

1
Find some sweaters that are at least 50% animal fiber. This is very important, otherwise the sweaters will not felt. Animal fiber includes alpaca, cashmere, and wool.
- Choose colors and patterns that go well together.
Begin by cutting the arms off of each sweater. Next, cut along the side seams on the sweater bodies. Finally, cut along the arm seams as well. You should get four, flat pieces from each sweater.
3
Felt the sweaters using a hot cycle on your washing machine. Wash the sweaters in a washing machine using hot water and a little bit of detergent. The combination of heat, agitation, and detergent will cause the fibers to felt together.
- Try to wash like colors with like colors to prevent bleeding and staining.
Use a hot temperature for this as well. This will help further felt and shrink the fibers . If the sweaters did not felt at all, they likely did not contain enough animal fiber; check the label again.
5
Cut your sweaters into squares and rectangles. Cut them in different sizes, about ½ inch (1.27 centimeters) larger than you want them to be; this will allow for seam allowances. You need to cut enough squares and rectangles to cover the front and back of your pillow.
- If you want just the front of your pillow to be patchwork, then cut a larger, solid square for the back.
- If you don't have a pillow to use as a base, then make a template that's about 25½ inches (65 centimeters) and 33½ (85 centimeters) square.
Test your design against your pillow to make sure that you get the shape and dimensions correct; it needs to be about 1 inch (2.54 centimeters) bigger on all sides. If anything sticks out, trim it off.
7
Sew the pieces together to make your front and back panels. Make sure that you are sewing them right-sides together, and that you are using a ½-inch (1.27-centimeter) seam allowances. Work one section at a time, removing the pins as you sew. Do not sew the front and back panels together just yet, however.
- Iron the panels, if needed using the wool setting on your iron.
8
Sew the panels together. Pin the panels together with the right sides facing in. Sew around them using a 1-inch (2.54-centimeter) seam allowance. Back stitch at the start and end of your sewing.
- If you want to stuff the pillow with fiberfill, leave a small gap in one of the sides.
- If you want to use a pillow, do not sew one side. Instead, sew a zipper to that side.
Reach through the gap you left in the side of the pillow and grab one of the corners. Pull the pillowcase out through the gap. If you need to, use a pen, pencil, or knitting needle to push out the corners.
If you used polyester fiberfill, sew the gap shut using a yarn needle and a piece of yarn. If you used a pillow, then zip the pillow shut.

Community Q&A

Search

Add New Question

Question

Do I stuff the neck inside, or cut it off?

Community Answer

You may do either, but stuffing it in would make it more comfortable for your cat.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 8
Question

Why no mention of when or how you stuff it?

Community Answer

You should stuff it before you sew the sleeves together. Stuff the sleeves and if you want, stuff the body of the sweater for it will become the bottom of the bed.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 13
Question

Can I do this without sewing?

Community Answer

Hot glue is a good option if you don't sew, just make sure the bed gets fully sealed.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Leave a small gap in the sleeves, and insert a hand warmer into one of the arms. This is great for arthritic cats! ^{[10]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Use the leftover sweater fabric to make a toy for your cat! ^{[11]
X
Research source}

Thanks
Helpful 1 Not Helpful 0
If your cat won't use the bed at all, consider donating it to an animal shelter instead.

Thanks
Helpful 1 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Most shelters do not allow kittens to come into contact with items used by adult cats. If you plan on donating the bed to such a shelter, use a new sweater.

Thanks
Helpful 7 Not Helpful 0
Don't force your cat to use the bed if she doesn't want to. The more you force her to use it, the more she'll hate it.

Thanks
Helpful 5 Not Helpful 0
Don't be disappointed if your cat ignores the bed you made for her. Not all cats like fancy beds.

Thanks
Helpful 4 Not Helpful 2

Things You'll Need

Making a Simple Cat Bed

Sweater
Scissors
Polyester stuffing or fiberfill
Sewing machine and thread or yarn and yarn needle
Tailor's chalk

Making a Felted Patchwork Pillow

Sweaters (at least 50% natural animal fiber)
Scissors
Ruler
Pillow form or polyester stuffing
Sewing pins
Sewing machine
Thread
Zipper (optional)
Washer and dryer access

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

Log in

How to Make a Cat Bed from an Old Sweater

Steps

Making a Simple Cat Bed

Making a Felted Patchwork Pillow

Community Q&A

Tips

Warnings

Things You'll Need

Making a Simple Cat Bed

Making a Felted Patchwork Pillow

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories