PDF download Download Article PDF download Download Article

Clay is a great way to express your creativity, whether you’re teaching a child the basics or you’re just experimenting on your own. A clay elephant is a really easy project to start with, and a great way to practice attaching smaller pieces of clay together. You can make a simple elephant in less than 10 minutes with a simple mound of clay and a sharp, pointy tool.

Part 1
Part 1 of 3:

Forming the Body

PDF download Download Article
  1. Lay out a fist-sized amount of clay in the middle of your workspace and set aside about 20% of the clay to use later. You’ll use this piece to form the head, ears, and trunk later on. [1]
    • You can use any type of clay for this. If you’d like your elephant to look more realistic choose gray and white clays for your project. [2]
    • For easier clean-up, do your work on an oil cloth, plastic sheet, or section of canvas.
  2. Watermark wikiHow to Make a Clay Elephant
    Hold the larger chunk of clay in 1 hand to keep it steady. Using your other hand, stick your thumb into the center of the pot. Pinch and rotate your fingers along the outer edge of the clay to form a “pot” of sorts, which will form the base of the elephant. As you work, smooth over any uneven edges or ridges with your fingers. [3]
    • Smoothing out clay can be a painstaking task at times, but don’t give up!
    Advertisement
  3. Watermark wikiHow to Make a Clay Elephant
    Once you’ve formed your pot, use your fingers to pull away small chunks around the edge of the clay, creating large gaps on the rim. Note that these remaining sections of clay will become the elephant’s feet. [4]
    • Try to remove and space out the pieces as evenly as possible.
  4. Watermark wikiHow to Make a Clay Elephant
    Go over the leftover clay with your fingers, creating miniature columns along the base. Adjust all 4 sections so they’re about the same height, so the elephant can stand upright without lilting. [5]
    • Before continuing on, place the elephant’s feet on a flat surface to see if the clay can stand upright. [6]
  5. Advertisement
Part 2
Part 2 of 3:

Creating the Head, Trunk, and Ears

PDF download Download Article
  1. Watermark wikiHow to Make a Clay Elephant
    Find the smaller section of clay you set aside earlier, and pull away about half of this leftover clay. Roll the clay between your palms in circular motions to create an even circle, which will serve as the elephant’s head. [7]
    • Don’t worry if the clay seems a little small—you’ll be melding it into the rest of the clay body.
  2. Watermark wikiHow to Make a Clay Elephant
    Grab another small portion from the clay you set aside and roll it back and forth between your palms. Continue rolling until the clay forms a coil, which you’ll use as your elephant’s trunk. [8]
    • Leave enough leftover clay to form 2 small ears.
  3. Watermark wikiHow to Make a Clay Elephant
    Take your sharp tool and make a few scratches on 1 end of the trunk. Find the place on the clay head where you’d like the trunk to attach, and make a few scratch marks on the ball. Press the scratched-up areas against one another so they stick together. [9]
    • Scratch marks serve as “glue” when you’re working with clay, and help you connect smaller parts to a larger whole.
  4. Watermark wikiHow to Make a Clay Elephant
    Take the remaining, unused clay and divide it into 2 small sections. Roll these sections of clay into balls, then flatten them into clay pancakes with your palms. These flattened portions of clay will serve as the ears for the elephant. [10]
    • Double-check that both ears are about equal, so your finished elephant won’t look off-kilter.
  5. Watermark wikiHow to Make a Clay Elephant
    As you did with the trunk, mark a few scratches along the base of each ear and on the sides of your elephant’s head. Press and mold the ears into place, using your fingers to smooth out any imperfections along the way. [11]
  6. As you’ve done with the other pieces, scratch several lines along the bottom of the elephant’s head. Similarly, mark several scratches along the front of the elephant’s body. Press the head into place, using your fingertips to work away any leftover imperfections. [12]
  7. Advertisement
Part 3
Part 3 of 3:

Adding Extra Features

PDF download Download Article
  1. Take a moment to add any special facial features or designs to your elephant before assembling it completely. You can scratch dots for nostrils along the end of the trunk, or sketch curved lines or circles to form the eyes and eyebrows, if you so desire. [13]
    • It’s easier to add the features before putting the elephant together all the way.
    • You can use the bottom of your tool to stamp circular eye indents into the clay.
  2. Watermark wikiHow to Make a Clay Elephant
    You can take your clay elephant to the next level with extra decorations, like colored eyes, individual toes, and tusks. Separate very small sections of black and white clay to form these extra features, which you can put on your elephant as a finishing touch! [14]
    • For instance, you can put small white toes along your elephant's feet, or roll tiny chunks of white clay into miniature tusks.
    • You can also use tiny amounts of white and black clay to make the eyes more dynamic.
  3. Certain types of clay, like water-based ceramic, will need to be fired in a kiln for the clay to harden. Baked dough can be set in an oven, while air-dry clay will harden on its own without heat. Oil-based clay won’t harden, and you can reuse it for other craft projects, if you’d like.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Always keep a cup of water nearby when working with water-based ceramic clay or air-dry clay. If you’re working with baked dough, or oil-based clay, you don’t need to worry about using water as much.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Clay
      • Sharp tool
      • Colored clay (optional)
      • Water (optional)

      About This Article

      Thanks to all authors for creating a page that has been read 56,628 times.

      Reader Success Stories

      • Tammyjo Knight

        Dec 25, 2017

        "I made it, just waiting for it to dry then painting it."
      Share your story

      Did this article help you?

      Advertisement