How to Make a DIY Corset: The Complete Guide

PDF download Download Article
What you need to know about making a corset yourself
PDF download Download Article

Corsets were often worn in the late 16th century, but now can be worn as lingerie, as a Halloween costume, or as a fun addition to an outfit. Making a corset can be a time-consuming and difficult venture, but there are ways to simplify the process so that the project is doable as a beginner, as long as basic sewing skills exist.

Things You Should Know

  • Choose a pattern to follow, and measure your size. Then, choose your desired fabric and iron it.
  • Pin the pattern to the fabric and cut the pieces out. Then, pin and sew them together.
  • Add boning, binding, and busks, then finish your corset with grommets and lace it up.
Part 1
Part 1 of 4:

Preparing Your Fabric

PDF download Download Article
  1. For beginners, finding a corset pattern online or in a pattern catalog is recommended over trying to make a custom-fit pattern. A good pattern will be adjustable to fit your size and should provide perfectly satisfactory results.
    • Keep in mind that a simple, basic corset pattern will usually be better for a novice than a complex one. [1] Corsets can be difficult to make, so take it easy on yourself the first time or two around.
    • You can find corset patterns for free and for sale, but the best kind usually fall into the latter category. You should be able to find an easy to follow corset pattern on the internet or in the sewing department of a craft store.
    • Alternatively, you can also make a custom corset pattern, but the process involves intricately plotting out your measurements on graph paper.
  2. A good pattern has multiple sizes marked on it, ranging usually from 6 to 26. Most patterns allow for 2 inches of ease in the back for lacing up the corset, so don't be alarmed if the pattern seems especially small. Find your size by taking your bust, waist, and hip measurement. [2] Once you have the appropriate size, cut out the pattern.
    • Wrap a tape measure around the widest part of your bust while wearing a standard bra for your bust measurement.
    • Find your waist measurement by wrapping a tape measure around the thinnest part of your waist, 2 inches (5 cm) above the navel. The corset is a garment worn to shape your body. Normally, you'll subtract 4 inches (10 cm) from your waist measurement.
    • The hip measurement can be found by wrapping a tape measure around the widest part of your hips. This is roughly 8 inches (20 cm) below your waist measurement.
    Advertisement
  3. The best material to use for a corset is corset coutil, because it is specifically designed for corsets, 100% cotton so it's breathable, very strong for its weight, and has little give in any direction. If you don't have coutil you can use a sturdy cotton duck (canvas) or quality linen. [3]
    • If you use duck fabric or linen, know that your corset will have more give in the finished product and will likely fit a bit larger than if made from coutil.
    • You can also add inner lining to your corset for extra comfort. Use a firmly woven cotton or cotton blend and cut and sew the lining following the pattern for the corset. [4]
    • When you choose thread for your corset, test it first to check the quality of the thread. All-purpose thread should be fine, but before you use it, unravel a length and try to snap it with your hands. If it doesn't break easily it is fine to use, but don't use thread that breaks easily because it will undergo a lot of tension in the corset and you want it to be sturdy.
  4. Wash and dry the fabric before you use it and iron it flat to remove any wrinkles or folds before cutting the fabric.
    • Check the grain. If you examine fabric closely you'll see that it has a "weft thread," which is the thread that is horizontal across the fabric, and a "warp thread" which intersects the waft thread at a right angle and is vertical across the fabric. These terms are also interchangeable with the terms "grain line" and "cross-grain." You'll want to cut the fabric along the stretchiest grain line, so stretch the fabric in both directions, determining which direction is more stretchy. Often times fabric will have a red line with arrows showing the grain line, and the perpendicular line to that is the cross-grain. [5]
  5. Lay the pattern vertically over the fabric, following the grain line with the most amount of stretch, which is most likely the cross-grain. You should avoid excess stretch encircling your waist. Pin the pattern onto the fabric. [6]
    • You could also use pattern weights, which can be stones or weights that help hold the pattern in place. If you opt for this method, outline the pattern with chalk before cutting. Sometimes this is a better option because it prevents any distortion when cutting the fabric.
  6. Make sure that you cut the pieces out according to the pattern instructions. Be a perfectionist when doing this, because the fabric needs to be the exact measurements as the pattern, or your corset won't fit correctly.
    • Depending on the fabric pattern you have, you may need to cut some of the pieces twice. Some patterns require you to cut the center-back pieces twice, the center-front piece once, and all other pieces twice, with all cuts on the fold and with no seam allowance at the back. Follow the pattern's instructions for how many cuts you need to make. [7]
    7. Advertisement
Part 2
Part 2 of 4:

Stitching Your Pieces

PDF download Download Article
  1. Assemble all the pieces as directed according to your pattern's instructions. Pin the pieces in place to prevent them from moving around as you sew.
    • You could also loosely baste (temporary stitches intended to be removed) the pieces together to accomplish the same result.
    • If your seams are trued, meaning that they match properly, you might be able to match up the top edges and guide the machine as you form seams without using pins or basting.
  2. Using a very small straight stitch, stitch your pieces together in order of the pattern. Start from top to bottom and go very slowly down the fabric, making sure the fabric doesn't shift or bunch. When you are finished, you should have two halves of your corset. [8]
    • Make sure when sewing pieces together that you are sewing the right pieces together. It could help to number the pieces on the back with a piece of white chalk.
  3. Once all the seams have been stitched, you should press them open toward the back. They should lie flat when done.
    • Trim off excess fabric if necessary to prevent bunching.
    • Note that you could also press the seams open as you go along.
  4. You won't be sewing your corset together past this point, you'll be using the busks and grommet area to attach it together, so you'll want all of the edges of your corset to have a nice clean seam.
    • Make sure not to sew the top and bottom of your corset, as this will be sewn with binding.
  5. Cut two pieces of waist tape for the two halves of your corset, with no stretch. Lay the waist tape across the line of most tension in your corset (you can figure this out by pulling your corset to find the tension). Sew the waist tape to the seam allowance on the back of your corset, basting it in place along the line of the tape. [9]
    • Waist tape can be twill tape, a sturdy ribbon, or tailor's tape of 5/8 inch or 7/8 inch width. To find the measurements for your waist tape, use your desired waist measurement, add two inches and then divide by two, cutting the two pieces to equal the final measurement.
    • When sewing your waist tape, make sure it lines up on both halves of your corset by lining up your corset on one side.
    6. Advertisement
Part 3
Part 3 of 4:

Adding the Boning, Binding, and Busks

PDF download Download Article
  1. Fold boning casing tape so that the long edges of the tape meet in the center of the backside of the tape. Then, stitch the tape to the center of each corset panel to create 3/8 inch wide boning channels, or if you want less seams on the front of your corset you can stitch it along the already made seams. [10]
    • You can also use 1 inch (2.5 cm) wide strips of fabric if you don't want to purchase casing tape.
  2. Take the inside of the right side of your corset, draw a stitching line in chalk 5/8 inch from the edge of your corset. Then, line your eye busk (the side with the hooks) up with your sewing line, leaving 3/4 inch from the top edge of your corset, making sure you are looking at the back of the busk. Sew along the busk, attaching it to your corset.
    • The busk is the piece with the "eyes or hooks" that the knobs or pins hook into on the front of your corset to attach it together (and will prevent you from having to untie the lacing on the grommet area each time you want to put on your corset). You can buy busks at a sewing or craft store.
  3. Taking small metal knobs or pins that fit into your busk holes, line them up with the busk on the right. Then stick them through the left side of the fabric near the edge and connect them completely to the fabric by attaching them with a stitch on the back.
  4. This is what will close up your corset and hide any ragged edges of the fabric. To use faux leather or real leather as your binding, place clear, water-soluble dressmaking tape along the bottom outside corner of one panel of your corset. Then, press the binding onto the tape, fold it over the edge, and tape to the inside of your corset as well.
    • You can also use satin, cotton, or another type of pre-made bias binding.
  5. Use your sewing machine to straight-stitch the taped binding into place.
    • For now, you should only add binding to the bottom. You need to add your boning to the corset before you can finish the top.
  6. Measure the length of the bone channels and cut spiral steel flats to the length of your corset leaving about 1/4 inch edge from the top and bottom of your corset, and insert bones into bone channels. You can cut these bones yourself or buy pre-cut bones (which is sometimes much easier).
    • You can also use spring steel flats, but spiral steel flats will do a better job of following all of the curves of your corset. [11]
    • To prevent rough edges of the bones you can use durable hot glue or craft glue to tip the bones.
  7. Use the same taping and sewing technique you applied to the bottom edge of the corset to bind the top of the corset with additional, matching binding.
    8. Advertisement


Part 4
Part 4 of 4:

Making the Final Touches

PDF download Download Article
  1. Space your eyelets/grommets roughly 1 inch (2.5 cm) apart along both sides of the back of your corset, near the edge. As you reach the waist, space four pairs of eyelets more closely together by about 1/4 inch (1/2 cm). You can buy these at a local craft or sewing store. [12]
  2. Start at the top and lace the corset down to the waist using a crisscross pattern. Work from the bottom up in the same manner, again stopping at the waist. Tie your laces together at the waist in "bunny ear" or "tennis shoe" style.
    • You need about 5 yards (5 m) (4.5 m) of lacing total.
    • Ribbon and twill are the most historically accurate forms of lacing, but flat lacing and cable cord hold up better in the long-term.
  3. The top of the corset should begin just above the nipple area, and the bottom should extend over your hips without riding up.
    • Cinch the waist of the corset in by pulling the loops at the waist.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What materials are needed for a corset?
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Alterations Express is a salon-style alteration and tailoring house with walk-in service, spacious dressing rooms, fitting specialists, and an extraordinary team of tailors and seamstresses at 13 storefront locations. With over 70 years of experience, they specialize in guiding individuals through a professional fitting, evaluating an alteration project on the spot, express alterations, and immediately providing pricing for any alteration. Alterations Express has been featured on multiple websites such as TheKnot.com.
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Expert Answer
    Boning, lace, satin, and grommets are all items that could be needed to make a corset—it really depends on if you're building the corset to be shown or not.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    What material should I use to make a corset for a dress?
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Alterations Express is a salon-style alteration and tailoring house with walk-in service, spacious dressing rooms, fitting specialists, and an extraordinary team of tailors and seamstresses at 13 storefront locations. With over 70 years of experience, they specialize in guiding individuals through a professional fitting, evaluating an alteration project on the spot, express alterations, and immediately providing pricing for any alteration. Alterations Express has been featured on multiple websites such as TheKnot.com.
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Expert Answer
    Use a woven fabric to make the corset itself, and white lining to create support within the dress.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    How thick should the lacing ribbon be? Can I use normal ribbon?
    Community Answer
    Yes, average ribbon will work. If you choose it too wide, it will be difficult to lace up.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 9
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Tape measure
      • Pins or pattern weights
      • Chalk
      • 1.5 yd (1.5 m) coutil, dyed whichever color you prefer
      • Waist tape or grosgrain ribbon
      • Flat steel or spiral steel boning
      • Boning tape
      • A strong, good quality thread
      • Two-part 5 mm eyelets and grommets
      • Straight-stitch sewing machine
      • Tailor's awl or fabric/leather punch
      • Water-soluble dressmaking tape
      • Binding
      • Lacing
      • Busks and knobs

      You Might Also Like

      How to
      Wear Thong Underwear
      How to
      Put on a Loincloth
      How to
      Wear Boxers
      How to
      Make a Thong
      How to
      Prevent Tights from Sliding Down
      How to
      Put on, Tighten, and Tie a Corset
      How to
      Shrink Underwear
      How to
      Hide the Fact That You Forgot to Wear Underwear
      How to
      Make a Corset Dress
      How to
      Get Rid of Bra Strap Indentations on Your Shoulders (and Keep Them from Coming Back)
      How to
      Wear a Bodysuit
      How to
      Convince Your Parents to Let You Wear a Thong
      How to
      Buy and Wear Thong Underwear Without Your Parents Knowing
      How to
      Avoid Panty Lines
      Advertisement

      References

      1. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.
      2. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.
      3. ↑ http://sidneyeileen.com/sewing-2/sewing/corset-making/basic-coutil/
      4. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.
      5. ↑ http://thecuttingclass.com/post/3233126291/grainlines
      6. ↑ http://makezine.com/projects/crafting-a-corset/
      7. ↑ http://makezine.com/projects/crafting-a-corset/
      8. ↑ http://sidneyeileen.com/sewing-2/sewing/corset-making/basic-coutil/3/
      9. ↑ http://sidneyeileen.com/sewing-2/sewing/corset-making-tasks/waist-tape/
      1. ↑ http://makezine.com/projects/crafting-a-corset/
      2. ↑ http://sidneyeileen.com/sewing-2/sewing/corset-making/basic-coutil/6/
      3. ↑ http://makezine.com/projects/crafting-a-corset/
      4. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.

      About This Article

      Article Summary X

      To make a corset, choose a pattern and determine your size by taking your bust, waist, and hip measurements. Next, cut out the pattern, pin it to your chosen fabric, and cut out the fabric pieces. Pin the pieces and sew them together using a straight stitch. Then, press each seam open flat and trim off the excess fabric. Finally, stitch the waist tape in place to complete the main body of the corset. To learn how to add the boning, binding, and busks to complete your corset, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 238,740 times.

      Reader Success Stories

      • Eulalie

        Oct 11, 2021

        "This was so awesome. I am going to go to the store to buy my stuff. This helped so much - it tells you what to do ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement