PDF download Download Article PDF download Download Article

Ableton Live's auto-warp function makes beat-matching so easy that anyone can pull it off. There is a whole world of stuff you can do with Ableton, midi controllers and external gadgets of all shapes and sizes. This is the fast and dirty way to set up and record a DJ mix in Ableton with nothing but a computer.

Part 1
Part 1 of 3:

Warping Tracks

PDF download Download Article
  1. Put all the audio files into a new folder on your desktop so you can easily access them in Ableton.
  2. Do this by using the file navigation bar. You should be able to see a list of the tracks you selected in the window on the left side of your screen.
    Advertisement
  3. The easiest way is to press CTRL+T with the session view open.
  4. Wait for the file info to load before you do anything else.
  5. This will bring up the waveform in the sample display window.
    • Confirm that the master BPM of your session is set to 120. This is the default setting, so unless you have messed with it before you should be good.
  6. You can either use the magnifying glass icon which appears when your cursor is placed near the top of the waveform, or the miniature diagram below the sample display window.
  7. These are the little yellow tabs with the numbers on them.
    • Make sure the first warp marker is placed right at the beginning of the first beat. [2]
    • Play the beginning of the song a few times while watching the line sweep through the waveform. This will help you to associate a visual cue with the location of the first downbeat.
    • Locate the numbered marker that is closest to the downbeat and double click it to make it a warp marker. It should turn yellow when you do this. The number will be something like 1.1.2.
    • Adjust the position of the second warp marker until the number in the sample window reads 120.
    • Right click on the second warp marker and choose "Warp From Here (Straight)" from the menu that comes up. This will warp your track according to the up and down beats you have selected.
    • Confirm that the start and end markers are correctly placed on your track. The start markers should line up with warp marker #1 and the finish markers can go wherever you would like the track to end.
  8. First, enable the metronome by pressing the little square at the top left of the screen. Then press play on each track individually to see that it matches up. [3]
  9. The best way to do this with an entire DJ set is to go to the file menu and select "Collect All And Save". This merges your audio files into the project and saves them as one file.
  10. Advertisement
Part 2
Part 2 of 3:

Mixing Live

PDF download Download Article
  1. It should be just the way you left it after you finished warping all the tracks.
    • You might want to confirm that the tracks are properly labelled with song titles so that you can easily identify them on the fly. Color coding is also useful for this. You can edit these options when you right click on any file in the session window.
  2. Imagine the 1 and 2 audio channels are right and left turntables.
    • Put the first track in the top slot of audio channel 1, the second track in the top slot of audio channel 2, the third track in the second slot of audio channel 1, and so on.
  3. See that little triangle on the colored icon for the track you want to play? click it.
    • Turn the volume down on audio channel 2. This will ensure that the second track does not play until you are absolutely ready for it.
  4. The volume on audio channel 2 should still be down when you do this. Ableton will automatically match the beat if you warped your tracks correctly.
    • Keep an eye on the time indicator above the volume switch so you can tell how much time is left in the track you are playing.
    • When the time is right, gradually raise the volume on audio channel 2. The two tracks will play together for a bit, during which time you can fade out the first track as you turn the volume up on the second one.
  5. This will prevent you from playing it twice.
    • Alternately, you can drag the file into a third or fourth audio channel to signal that you have played it already.
    • Move the third track to the top slot in audio channel 1, and turn the channel's volume down.
  6. Again, it should start on the correct beat if your files are warped accordingly.
    • Gradually raise the volume on audio channel 1 as the second track is drawing to an end. Fade the volume out on audio channel 2 as you are doing this.
  7. Advertisement
Part 3
Part 3 of 3:

Recording a Set

PDF download Download Article
  1. This should include all the warped tracks from part one.
  2. Select the track and press CTRL+C, or right click on the track and select "Copy" from the menu.
  3. You will need to move back and forth between arrangement and session view a lot throughout this process.
    • Open arrangement view. Click the top circle in the upper right hand corner of the screen. The one with the horizontal lines.
    • Paste the first track into audio channel 1. The pasted track will begin wherever the blinking cursor is placed. Place the cursor at the end of the first track in audio channel 2 before continuing.
    • Copy the second track from the session window. Click on the bottom circle at the top right of the screen to move back and forth between views.
    • Go back to arrangement view and paste the second track in audio channel 2 near the end of the first one. If your cursor is in the right place, it should drop there automatically.
  4. You can move them back and forth until they overlap in just the right places. Complete this step for every transition in your set.
    • Zoom in on the first transition using the magnifying glass. This appears when you scroll over the numbers just above audio channel 1. You may also zoom in by adjusting the bar at the very top of the arrangement screen.
    • Select the second track and move it backwards so that it overlaps a bit with the first track. When your cursor is placed in the area between the string of numbers and the first audio channel, a speaker icon will appear. Left-click with the speaker icon to start playing audio from any point in the set. Do this often to ensure the beats are matched.
  5. Initiate draw mode with the little pencil button at the top of the page. This will allow you to manipulate the red volume line down the middle of each track to achieve a fading effect in your audio. [4]
    • Right click with the pencil enabled to access the grid menu. Depending on how detailed you want to get with your fades, you can adjust the width of the background grid to fit your needs.
  6. There are a couple of things you should do before rendering the final audio file.
    • Make sure your start and end punch-out points are placed accordingly. These are the little gray triangles right under the row of little numbers. Drag the first marker to the beginning of the set and the last one to the end.
    • Select both audio channels by clicking the name of each one with the CTRL button pressed down. You will know you did this correctly when both names become highlighted in yellow.
    • Go to the "File" menu and select "Export". A series of menus will follow which allow you to choose your file type and location. Select WAV from the menu, and save the file wherever you like. From here, you can upload your mix for streaming or burn it straight to a CD.
  7. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      References

      1. Timothy Linetsky. Music Producer & Instructor. Expert Interview. 13 February 2019.
      2. Timothy Linetsky. Music Producer & Instructor. Expert Interview. 21 April 2021.
      3. Timothy Linetsky. Music Producer & Instructor. Expert Interview. 21 April 2021.
      4. Timothy Linetsky. Music Producer & Instructor. Expert Interview. 13 February 2019.

      About This Article

      Article Summary X

      To make a DJ mix set using Ableton live, start by putting the audio files you want to use in a new folder on your desktop. Next, open Ableton and locate the source folder, which will enable you to see a list of the tracks you selected. Create an additional audio channel to drag and drop your files into. Then, double click the first track to bring up the waveform, which will allow you to adjust the BPM. Finally, place the tracks in the order you would like to play them. For tips on recording your set in arrangement view, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 267,908 times.

      Reader Success Stories

      • Tony Page

        Aug 5, 2017

        "Great work. Love the simplicity and detail. Thanks for the help."
      Share your story

      Is this article up to date?

      Advertisement