How to Make a Garter

Garters are decorative elastic bands that you wear on your thigh. A garter is often included as part of a bride’s wedding attire, but you may also wear a garter as a costume accessory, such as for a flapper. Garters are easy to make, whether you want to sew a garter or make a no-sew garter. Try making a garter for yourself or as a gift for someone special!

Making a Quick Garter with Hot Glue (No Sewing)

  1. Purchase a decorative elastic strip about 2 in (5.1 cm) wide.
  2. Cut the elastic to be about 1 inch (2.5 cm) longer than your thigh measurement.
  3. Use a hot glue gun to apply rhinestones, silk flowers, and other decorations.
  4. Glue the ends of the elastic strip together so they overlap by ½ in (1.3 cm).
Method 1
Method 1 of 3:

Sewing a Gathered Satin and Lace Ribbon Garter

PDF download Download Article
  1. Watermark wikiHow to Make a Garter
    Wrap the measuring tape around the center of your thigh, or wherever you would like to wear the garter. [1] Make sure that the measuring tape lays flat and is not twisted. [2]
    • Don’t squeeze the measuring tape around your thigh! It should be snug, but not tight.
  2. Watermark wikiHow to Make a Garter
    Multiply the measurement you got by 1.5. Then, add 1 in (2.5 cm) for your seam allowance. Cut your ribbon to this length with a sharp pair of scissors. [3]
    • For example, if your measurement was 20 in (51 cm), then multiplying this number by 1.5 would give you 30 in (76 cm). Add an extra 1 in (2.5 cm) for a total of 31 in (79 cm).

    Trying to decide on the best color combination for your garter? Try red, purple, or pink with black lace for a sultry garter, or opt for blue satin ribbon with white lace if you need something blue for your wedding ensemble.

    Advertisement
  3. Watermark wikiHow to Make a Garter
    Match up the ends of the ribbon and pin them together. Then, sew a straight stitch halfway down the pinned edge. Do not sew all the way down the seam. Sew halfway down the edges of the 2 ends of the ribbon. [4]
    • This will leave an opening that you will insert the elastic through later on.
  4. Watermark wikiHow to Make a Garter
    Next, turn the fabric so that the seam is facing out. Lay the ribbon on a flat surface with the seam facing up. Then, press the ends of the ribbon down and sew a straight stitch along the raw edges of these flaps to make them lay flat. [5]
    • You may place a pin through each of the flaps to keep them in place while you sew. Just be careful not to sew over the pins!
  5. Watermark wikiHow to Make a Garter
    Pin the ribbon to keep it folded in half. Then, sew a straight stitch along the folded edge to secure the fold. Do not sew across the pins or you may damage your sewing machine. [6]
    • The straight stitch setting is #1 on most sewing machines.
  6. Watermark wikiHow to Make a Garter
    Use the same measurement that you used to cut out your ribbon. Cut the lace to the desired length using a sharp pair of scissors. [7]
    • Make sure to cut straight across to avoid any jagged edges!
  7. Watermark wikiHow to Make a Garter
    Position the flat edge of the lace trim so that it will be hidden between the 2 pieces of ribbon. Then, insert pins through the ribbon and lace trim to hold them together. [8]
    • Insert the pins so they are perpendicular to the edges of the ribbon. This will make it easier to remove them as you sew.
  8. Watermark wikiHow to Make a Garter
    Place the ribbon and lace under your presser foot and lower it. Then, apply gentle pressure to sew a straight stitch about 0.25 in (0.64 cm) from the raw edge of the ribbon. Do not sew over the opening that you left in the seam! [9]
    • Make sure to remove the pins as you sew. Do not sew over them or you may damage your sewing machine.
  9. Watermark wikiHow to Make a Garter
    Wrap a piece of elastic around your thigh, or wherever you want to wear the garter. Overlap the ends of the elastic by about 0.5 in (1.3 cm) on each end. Then, cut the elastic to this length. [10]
    • You may also use your thigh measurement and add 1 in (2.5 cm) if that is easier for you.
  10. Watermark wikiHow to Make a Garter
    Insert the safety pin into the end of the elastic and then close the safety pin. Insert a pin through the other end of the elastic to attach it to the seam. This will make it much easier to work the elastic through the opening that you left in the garter. [11]
    • The second pin acts as an anchor to prevent the end of the elastic from going into the tube.
  11. Watermark wikiHow to Make a Garter
    Push the safety pin into the opening, and then use your fingers to work it through the tube of ribbon. Go slowly and be careful not to open the safety pin as you push it through the tube. When the pin reaches the other end of the tube, pull it out. [12]
    • Remember to check the end of the elastic periodically to ensure that it is still pinned to the seam and does not slip through the opening.
  12. Watermark wikiHow to Make a Garter
    Take the safety pins out of the ends of the elastic while holding them securely. Then, overlap the ends of the elastic and insert a pin through the 2 pieces of elastic to keep them together. Sew a straight stitch across the 2 pieces of elastic to secure them together. [13]
    • Trim off any excess threads using a pair of scissors.
    • Your garter is ready to wear!
    13. Advertisement
Method 2
Method 2 of 3:

Creating a Simple Lace Ribbon Garter

PDF download Download Article
  1. You will need enough lace to wrap around the thickest part of your thigh 1 time with about 1 in (2.5 cm) of overlap, so you may want to measure your thigh before you buy the ribbon. [14] Make sure that the lace is stretchy before you buy it! Non-stretch lace ribbon will not work for this project.
    • White or off white lace makes a pretty garter.
    • Opt for blue lace if you need something blue for your wedding ensemble!
    • Go with black or red lace for something daring and sexy.

    Tip : Use a different type of stretch ribbon if desired, such as a stretch mesh or a stretch solid.

  2. Watermark wikiHow to Make a Garter
    Wrap the ribbon around your thigh and overlap the ends by 1 in (2.5 cm). Then, mark the spot where you want to cut the ribbon with your finger. Take the ribbon away from your leg and then cut a straight line across it where you are grasping it. [15]
    • Make sure to use a pair of sharp scissors to cut the lace! Cut straight across and be careful not to create any jagged edges.
  3. Watermark wikiHow to Make a Garter
    Thread a needle with 18 in (46 cm) of thread that matches your lace ribbon. Pull the end until the 2 ends are even and tie a knot in the ends of the thread. Insert the needle through the ribbon where you want to attach a bead or sequin, and then insert the end of the needle through the bead or sequin. Pull the thread taut and then bring the needle back through the lace to the back again. [16]
    • Repeat this as many times as you like to attach more beads and sequins.
  4. Watermark wikiHow to Make a Garter
    To make your lace garter sparkly, apply a dot of hot glue to the back of a rhinestone. Then, press the rhinestone onto the lace ribbon where you want to add it. Hold it in place for a few seconds to ensure that it bonds with the fabric. [17]
    • Repeat as many times as desired to add more rhinestones.
    • Make sure to plug in your glue gun about 10 minutes before you want to use it! It will take about this long for it to warm up. [18]
  5. Watermark wikiHow to Make a Garter
    When you have finished decorating the lace ribbon how you want it to look, match up the ends so that the decorations are on the inside of the loop. Insert a pin through the ends of the ribbon to hold them together. [19]
    • By pinning the ends this way, the raw edges of the ribbon will be hidden on the inside of the garter.
  6. Watermark wikiHow to Make a Garter
    about 0.5 in (1.3 cm) from the raw edges. Place the ribbon ends under the presser foot on your sewing machine. Lower the presser foot and sew a straight stitch about 0.5 in (1.3 cm) from the raw edges of the ribbon. [20]
    • Be careful not to sew over the pins or you may damage your sewing machine.
  7. Watermark wikiHow to Make a Garter
    Thread a needle with 18 in (46 cm) of thread and tie a knot in the ends just as you did before. Then, insert the needle through the 2 pieces of ribbon about 0.5 in (1.3 cm) from the raw edge. Bring the needle all the way through the other side, pull it taut, and then bring it down through the lace again.
    • Continue to sew across the edge and sew through the last stitch 3 times to secure it. Cut the thread close to the lace ribbon.
    8. Advertisement
Method 3
Method 3 of 3:

Making a No-Sew Elastic Garter

PDF download Download Article
  1. Visit your local craft supply store or search online to find elastic that comes in different colors and designs. Purchase elastic that is about 2 in (5.1 cm) wide. [21]
    • You will only need enough to wrap around your thigh with 0.5 in (1.3 cm) of overlap, so measure before you go to determine how much you will need.
  2. Watermark wikiHow to Make a Garter
    Wrap the elastic around your thigh or wherever you want to wear the garter. The elastic should be a little snug but not tight. Overlap the ends by 0.5 in (1.3 cm) on each end and then cut it at this point. [22]
    • Use a sharp pair of scissors and cut straight across the elastic.
    • Glue guns take about 10 minutes to heat up, so turn on your glue gun right when you start this craft! [23]
  3. Watermark wikiHow to Make a Garter
    Lay out the strip of elastic with the decorative side facing up. Then, choose an embellishment to add. Dispense a dot of hot glue onto the back of the embellishment and then press it onto the garter where you want it to go. [24]
    • Add a silk rose to the center of the garter for an elegant touch.
    • Create a row of rhinestones along 1 or both edges of the garter for sparkly finish.
    • Glue on buttons in random spots for a fun, crafty garter.
  4. Watermark wikiHow to Make a Garter
    When you have finished gluing your embellishments onto the garter, grasp the ends of the garter and place 1 end over the other end so that they are overlapping by about 0.5 in (1.3 cm). Apply a generous dab of glue to the top of 1 end and press the other end into it. Hold the ends together until they are secured, or about 15 seconds. [25]

    Need a few more accessories to wear with your garter? Try making yourself a flower headband, a pearl necklace , or a pair of chandelier earrings.

    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I keep my garter from falling down?
    LaTricia Brown
    Master Tailor & Creative Director
    LaTricia Brown is a Master Tailor and Designer and the Owner of Trish B. Stylin' based in the Savannah, Georgia metro area. LaTricia has over a decade of experience including bridal design, men's and women's clothing design, and fashion show directing. She has a BFA in Fashion with a minor in Accessory Design from the Savannah College of Art and Design (SCAD). LaTricia has worked with W Magazine in New York City and has assisted with the personal styling of P. Diddy. She has also assisted the development of Sean John's 10-Year Anniversary Collection and appeared in the filming of Diddy's "If I Were King" Documentary.
    LaTricia Brown
    Master Tailor & Creative Director
    Expert Answer
    Try subtracting about 3 in (7.62 cm) from your thigh measurement to get your elastic measurement. The slightly shorter elastic will help the garter stay secure instead of sliding down.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
  • Question
    If my leg measurement is 15 inches, how long should the ribbon be?
    Community Answer
    That depends in part upon how gathered you want your garter to be, but it must be at least 17 inches.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 9
  • Question
    How I measure the leg garter?
    T. Chinsen
    Top Answerer
    The elastic length is the measurement of the thigh area where it will be worn. The lace and ribbon length is 3" (7.6 cm) more than the elastic. When sewing the elastic, overlap the end by 0.5" (1.2 cm) for a comfortable fit.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      Sewing a Gathered Satin and Lace Ribbon Garter

      • Satin ribbon
      • Lace trim
      • Elastic
      • Measuring tape
      • Scissors
      • Pins
      • Thread
      • Sewing machine

      Creating a Simple Lace Ribbon Garter

      • Stretch lace ribbon
      • Measuring tape
      • Scissors
      • Pins
      • Needle and thread
      • Sewing machine (optional)
      • Rhinestones
      • Sequins
      • Beads
      • Glue gun

      Making a No-Sew Elastic Garter

      • Decorative elastic
      • Measuring tape
      • Pins
      • Scissors
      • Rhinestones
      • Sequins
      • Glue gun

      You Might Also Like

      How to
      Make a Sash
      How to
      Make Leg Warmers
      How to
      Sew a Patch on a Uniform
      How to
      Make a Fleece Beanie Hat
      How to
      Make Fingerless Gloves
      How to
      Sew a Scarf
      How to
      Make a Handkerchief
      How to
      Make a Veil
      How to
      Make Leather Gloves
      How to
      Make a Tie
      How to
      Make Suspenders
      How to
      Make Shoulder Pads
      How to
      Make Epaulettes
      How to
      Make a Cap
      Advertisement

      References

      1. ↑ LaTricia Brown. Master Tailor & Creative Director. Expert Interview. 9 July 2021.
      2. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=57
      3. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=65
      4. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=79
      5. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=90
      6. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=108
      7. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=119
      8. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=127
      9. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=132
      1. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=143
      2. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=150
      3. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=161
      4. ↑ https://www.youtube.com/watch?v=9_JRJi1Y9Wc&feature=youtu.be&t=170
      5. ↑ LaTricia Brown. Master Tailor & Creative Director. Expert Interview. 9 July 2021.
      6. ↑ https://www.bridalguide.com/blogs/the-budget-guru/diy-wedding-garter
      7. ↑ https://www.bridalguide.com/blogs/the-budget-guru/diy-wedding-garter
      8. ↑ https://www.bridalguide.com/blogs/the-budget-guru/diy-wedding-garter
      9. ↑ https://www.youtube.com/watch?v=UofY6lOQ-q0&feature=youtu.be&t=15
      10. ↑ https://www.bridalguide.com/blogs/the-budget-guru/diy-wedding-garter
      11. ↑ https://www.bridalguide.com/blogs/the-budget-guru/diy-wedding-garter
      12. ↑ https://www.weddingchicks.com/blog/diy-nosew-bridal-garter-l-13592-l-45.html
      13. ↑ https://www.weddingchicks.com/blog/diy-nosew-bridal-garter-l-13592-l-45.html
      14. ↑ https://www.youtube.com/watch?v=UofY6lOQ-q0&feature=youtu.be&t=15
      15. ↑ https://www.weddingchicks.com/blog/diy-nosew-bridal-garter-l-13592-l-45.html
      16. ↑ https://www.weddingchicks.com/blog/diy-nosew-bridal-garter-l-13592-l-45.html
      17. ↑ LaTricia Brown. Master Tailor & Creative Director. Expert Interview. 9 July 2021.

      About This Article

      Article Summary X

      To make a no-sew elastic garter, choose a piece of decorative elastic that's about 2 inches wide. Next, wrap the elastic around your thigh so that it's a little snug and cut it 1 inch wider than your thigh. Then, lay out the strip of elastic with the decorative side facing up and use hot glue to attach rhinestones, silk flowers, or other embellishments. Finally, overlap the ends of the elastic and glue them together. For tips on creating a garter by sewing, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 218,077 times.

      Did this article help you?

      Advertisement