How to Make a Metal Sword Without a Forge

PDF download Download Article
PDF download Download Article

If you love collecting swords but you aren't a fan of spending a ton, you’ve probably thought about making your own. However, not everyone has a forge they can use whenever they want, which makes sword-making a little tough. Fortunately, there’s a way you can craft your very own sword without using a forge at all! Read through these instructions to learn how to make a metal sword in a single afternoon.

1

Trace the tip of your sword onto a strip of metal.

PDF download Download Article
  1. Pick one out that’s around 1 to 1.5 m (3.3 to 4.9 ft) long, then trace a pointed tip onto the end of it with a permanent marker. Make it into a triangle shape for the perfect point on the edge of your sword. [1]
    • You can find steel strips at most hardware stores for under $10.
2

Cut the shape of your sword out with an angle grinder.

PDF download Download Article
  1. Put on eye protection and power up an angle grinder with a cutting wheel blade. Hold the angle grinder with both hands and carefully cut the tip into the strip of metal, following the lines you traced earlier. Do this outside so you don’t shoot sparks into your home! [2]
    • Angle grinders are fairly easy to use. You can either buy one for around $70, or you can rent one from your local hardware store.
3

Grind the edges of the sword.

PDF download Download Article
  1. Put a grinding disc onto your angle grinder and make small passes over both edges of the metal strip, holding the angle grinder at a 45-degree angle to the sword itself. Keep going until both edges are slightly slanted. [3]
    • Don’t hold the angle grinder parallel to the sword, as that will flatten the edges.
4

Sand the sword if you’d like it to be shiny.

PDF download Download Article
  1. If you want the whole thing to be shiny, grab a power sander and load it with 80-grit sandpaper. Turn it on and press it against your sword, moving in circular motions over the flat side. It will take about 1 hour of sanding until your sword looks shiny, but it will be worth it! [4]
    • If you don’t care about the shininess of your sword, you can skip this step.
5

Add a guard made out of a fridge handle.

PDF download Download Article
  1. Try to find a metal fridge handle that’s about 6 in (15 cm) long from your local hardware store. Use a masonry drill bit to cut a slot in the dead center of it that's the same length and width as the flat end of your sword. Slide the guard onto that end of the sword so it’s situated at the end of the hilt, or the area where you’ll grab the sword. [5]
    • If the guard slides around at all, put a screw in front of it using a masonry bit.
6

Cut a hilt out of a block of wood.

PDF download Download Article
  1. Grab a block of wood that’s about 2 inches (5.1 cm) thick and set the non-pointed edge of your sword on top of it (the spot where you’d grab your sword to hold it). Trace the shape of the hilt onto the wood with a pencil, then use a band saw or a hand saw to cut out the shape. Then, cut out another piece of wood in the same shape and size so you can cover both sides of your hilt. [6]
    • The type of wood you choose doesn’t really matter. Just make sure it’s a color that you like, since it will be on the end of your sword.
7

Drill 3 holes into the metal strip.

PDF download Download Article
  1. Clamp your sword down onto your workbench with a C-clamp and mark out where your hilt will be. Use a masonry drill bit to drill 3 holes along the hilt that are about 2 inches (5.1 cm) apart from each other. Drill slowly and carefully to avoid heating up the metal too much. [7]
8

Drill holes into each block of wood.

PDF download Download Article
  1. Place the blocks of wood onto the strip of metal and line them up with the holes you already made. Use a pencil to mark the holes onto the wood, then clamp the pieces of wood down onto a workbench with a C-clamp. Use a drill to make 2 holes (the top and the bottom hole) on one block, and 1 hole (the center hole) in the other block. [8]
    • It’s much easier to attach the wood to the hilt of your sword if the holes are already there.
9

Attach the hilt to the sword with screws.

PDF download Download Article
  1. Screw in 2 screws on one side of the sword, going for the top and bottom drill holes that you made. Flip the sword over and add the last screw in the center drill hole. If parts of the screws stick out, file them off with a metal file to make sure your hilt is smooth. [9]
    • If the wood on your hilt is kind of rough, use a sheet of 80-grit sandpaper to sand it down until it’s smooth.
10

Wrap the grip in leather or twine.

PDF download Download Article
  1. Add a thin layer of super glue over the wooden hilt, then start wrapping your leather or twine from the bottom up. Overlap each layer so your wooden hilt is completely hidden. When you get to the top of the sword, cut off the excess twine or leather, then let it dry. [10]
    • Try cutting up an old leather belt into strips for the perfect grip material.

Community Q&A

Search
Add New Question
  • Question
    How durable is this sword?
    Community Answer
    It is not very durable, as it is not heat treated or tempered. Only use this method for display pieces -- if you want a good sword, then use a forge.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 21 Helpful 103
  • Question
    What's a good steel for a beginning?
    Community Answer
    Carbon steel 1045-1080; stainless steel 440 a, b or c for a knife, but no sword longer than a foot 316 to make something that won't rust. Anything made of tough steel (impact resistant) that has not suffered too much wear and tear.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 56
  • Question
    Where can I get the metal to make the sword?
    Community Answer
    A junkyard or any place storing old cars would be a good place to start.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 61
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Things You'll Need

      • Permanent marker
      • C-clamp
      • Angle grinder
      • Grinding disc
      • Drill
      • Masonry bit
      • Steel strip
      • Block of wood
      • Screws
      • 80-grit sandpaper
      • Leather or twine
      • Superglue

      You Might Also Like

      How to
      Make a Wooden Sword
      How to
      Make a Very Easy Balloon Sword
      How to
      Win a Swordfight
      How to
      Understand Basic Fencing Terminology
      How to
      Make a Samurai Sword
      How to
      Take Care of Swords
      How to
      Learn to Fence
      How to
      Use Any Two Handed Sword

      References

      1. ↑ https://www.youtube.com/watch?v=NgFXm9naNUc&t=91s
      2. ↑ https://www.youtube.com/watch?t=121&v=pNhZRH_BmzM&feature=youtu.be
      3. ↑ https://www.youtube.com/watch?t=116&v=NgFXm9naNUc&feature=youtu.be
      4. ↑ https://www.youtube.com/watch?t=167&v=NgFXm9naNUc&feature=youtu.be
      5. ↑ https://www.youtube.com/watch?t=220&v=NgFXm9naNUc&feature=youtu.be
      6. ↑ https://www.youtube.com/watch?t=513&v=syMZkMmpTxQ&feature=youtu.be
      7. ↑ https://www.youtube.com/watch?t=191&v=NgFXm9naNUc&feature=youtu.be
      8. ↑ https://www.youtube.com/watch?t=191&v=NgFXm9naNUc&feature=youtu.be
      9. ↑ https://www.youtube.com/watch?t=522&v=syMZkMmpTxQ&feature=youtu.be
      1. ↑ https://www.youtube.com/watch?t=324&v=pNhZRH_BmzM&feature=youtu.be

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 164,728 times.

      Reader Success Stories

      • Wade

        Oct 13, 2018

        "Your article was helpful. I did not have a metal strip, so I instead want to use a metal fooseball table handle (I ..." more
      Share your story

      Did this article help you?