How to Make DIY Fabric Bows without Sewing

PDF download Download Article
A simple step-by-step guide for cute fabric and ribbon bows
PDF download Download Article

Bows are an essential accessory for many little girls, and they can be an adorable addition to a number of your favorite crafts. However, buying pre-made bows can start to get pricy, and many bow tutorials involve using a sewing machine. Luckily, if you've ever wanted to learn how to make a no-sew hair bow out of ribbon or how to make fabric hair bows for babies, you're in luck—these no-sew bows are simple, inexpensive, and almost too cute!

Things You Should Know

  • Cut a 5x5 in (13x13 cm) and 2x3 in (5x8 cm) strip of fabric. Fold the large piece in half lengthwise and crease it.
  • Then, fold the top and bottom to the crease so they overlap. Fold the piece in half widthwise, iron the crease, the fold the top and bottom to the crease.
  • Fold the smaller piece in to thirds and iron it. Accordion fold the larger piece to the center and glue the small piece around it.
Method 1
Method 1 of 3:

Crafting a Basic Fabric Bow

PDF download Download Article
  1. The size of the larger piece of fabric will depend on the size bow you want, but about 2 in × 3 in (5.1 cm × 7.6 cm) should be enough for the center of the bow. For the larger piece, measure and cut:
    • 5 in × 5 in (13 cm × 13 cm) to make a 2 in (5.1 cm) bow.
    • 9 in × 7 in (23 cm × 18 cm) to make a 4 in (10 cm) bow.
    • 11 in × 8 in (28 cm × 20 cm) to make a 5 in (13 cm) bow.
    • 13 in × 9 in (33 cm × 23 cm) to make a 6 in (15 cm) bow.
    • 17 in × 11 in (43 cm × 28 cm) to make an 8 in (20 cm) bow.

    Tip: Choose any color and pattern you want for your fabric. Use a heavier fabrics like starched cotton to create a stiffer bow, or thinner materials like satin to make a floppy bow.

  2. Watermark wikiHow to Make a No Sew Bow
    Arrange the large piece of fabric so the longer edges are on the top and bottom and the shorter edges are on the sides. Then, bring the bottom half of the fabric up to the top edge and press down on the fold to make a neat crease. [1]
    • There's no need to iron this crease as long as you can see it when the fabric is unfolded.
    Advertisement
  3. Watermark wikiHow to Make a No Sew Bow
    Lay the fabric flat again and check to make sure you can see the crease in the center. Then, bring up the bottom edge again, this time folding it just enough to overlap the crease you made by about 1 ⁄ 2  in (1.3 cm). Fold down the top edge, as well. [2]
    • Use your fingers to hold these folds in place. Using glue here might make your bow too stiff when it's finished.
  4. Watermark wikiHow to Make a No Sew Bow
    Take the right edge of the fabric and fold it toward the left, lining up the edges neatly. Press the crease down with your fingers, then iron the front and back of the fabric on low heat. [3]
    • While ironing the piece isn't absolutely necessary, it will make the finished bow look much neater.
    • When you're finished ironing, set this piece of fabric aside for a few minutes.
  5. Watermark wikiHow to Make a No Sew Bow
    Take your smaller rectangle of fabric, then fold the bottom to about 2/3 of the way up the width. Fold the top down to the new bottom edge, then iron the creases on low heat. [4]
    • Ironing will help this piece of fabric hold its shape, even without glue or stitching.
  6. Watermark wikiHow to Make a No Sew Bow
    Take your larger fabric square and undo the center fold. You should have a long rectangle with a vertical crease in the center. First, fold the left side in toward the center, then do the same with the right side. [5]
    • If you'd like, you can secure these ends with a small dot of glue. However, you can also hold them in place with your fingers if you'd prefer to use less glue—you'll secure the ends in a later step.
  7. Watermark wikiHow to Make a No Sew Bow
    Holding the ends of the bow in place, fold down the top 1/4 or so of the very center of the bow. Then, make another fold toward the back of the bow at about the halfway mark, and fold the fabric back toward you about 3/4 of the way down. [6]
    • The fold should resemble a folded fan or an accordion, and you should start seeing the shape of a bow.
    • For very large bows, you might prefer to use 4 or 5 accordion folds.
  8. Watermark wikiHow to Make a No Sew Bow
    First, place a small dot of glue in the top and bottom folds that are facing you. Then, flip the bow over and put another drop of glue inside the fold in the center. Pinch the center of the bow for 15-30 seconds to keep the sides together while the glue dries. [7]
    • If you'd prefer, you can use double-sided fabric tape instead of hot glue. Just cut small pieces that will fit inside the folds. [8]
  9. Place a dot of hot glue in the center of the bow, then press the end of your thinner rectangular strip to the glue. Wrap the thinner strip all the way around the center of the bow. Trim off any excess, then glue down the other end to finish your bow! [9]
    • To make the center piece look neater, place a small drop of glue underneath the top folded layer, as well. This will keep the unsecured corner from lifting away from the bow.
    • Try attaching your bow to a barrette or alligator clip to make a hairbow, or glue it to a longer strip of fabric to make a cute bow tie! [10]
    10. Advertisement
Method 2
Method 2 of 3:

Making a Simple Ribbon Bow

PDF download Download Article
  1. Watermark wikiHow to Make a No Sew Bow
    The finished bow will be about half as long as your strips of fabric. For instance, if you want to make a 4 in (10 cm), you'd cut your ribbon to be 8 in (20 cm). A 2 in (5.1 cm) strip of ribbon will be plenty for your shorter piece. [11]
    • The width of your ribbon will determine the width of your bow. 1.5 in (3.8 cm) is a good option for most bows, but you could use thicker ribbon for a larger bow, or multiple loops of a thinner ribbon if you'd prefer!
    • As an alternative, you can take a wired ribbon. It may be easier to shape, and your bow will keep its shape better.
  2. Watermark wikiHow to Make a No Sew Bow
    Strike your lighter, then lightly pass the flame under the edges of your ribbon. Don't leave the flame in one place for too long—move it back and forth rapidly to ensure you don't scorch the ribbon. One quick pass should be enough to seal the ends. [12]
    • If you're a kid, be sure to ask for an adult's help for this step!
  3. Watermark wikiHow to Make a No Sew Bow
    Being careful not to burn yourself, draw a thin strip of hot glue down the center of the ribbon from top to bottom. Don't make the line too thick, though, or the excess might be visible on your finished bow. [13]
    • If you need help finding the exact center of the ribbon, fold it in half from left to right, then crease the fold. When you unfold the ribbon, the line will be in the center.
  4. Watermark wikiHow to Make a No Sew Bow
    First, take one side of the ribbon and line it up with the glue. Try not to cover all of the glue, though—both edges need about the same amount of glue to be secure. [14]
    • Work quickly, since hot glue doesn't take long to dry.
    • Once you've glued down the left and right edges of the ribbon, you should start to see a bow shape emerging.

    Tip: If you accidentally cover all of the glue, just use a new strip for the other side. However, the more glue you use, the more likely it will be to show when you're finished, so try to use it sparingly.

  5. Watermark wikiHow to Make a No Sew Bow
    Fold the top and bottom quarters of the ribbon in toward you. Then, fold the center of the ribbon away from you. This should create an accordion-style fold that goes forward, back, and forward again. [15]
    • This will help give your no-sew bow the characteristic gather in the center.
  6. Watermark wikiHow to Make a No Sew Bow
    To ensure your bow holds its shape, place a small drop of glue in each of the 3 folds you just made. This will finish creating the shape of your bow. [16]
    • Be especially careful not to use too much glue here, or it could make your bow too stiff.

    Want to make a double bow? Fold a second ribbon the exact same way as you did the first. Then, glue both bows together in the center, so they're lined up long side to long side. [17]

  7. Place a small dot of hot glue on the underside of your bow, right in the center. Then, press the end of your smaller strip of fabric to the glue and wrap it snugly around the accordion pleats you made. Trim off any excess, then glue the other end in place to complete your no-sew bow! [18]
    • Fabric bows make adorable hair accessories, but you can also use them to decorate crafts, jewelry, and gifts!
    8. Advertisement
Method 3
Method 3 of 3:

Creating a Bow with Tails

PDF download Download Article
  1. Watermark wikiHow to Make a No Sew Bow
    If you're curious how to make fabric bows with tails, it couldn't be easier! Just start with a large piece of fabric with a length that's about 3 times longer than you want the finished bow to be. The width should be about 3 times wider than your finished bow, as well. [19]
    • For instance, if you want a bow that's 5 in (13 cm) with tails that are 3 in (7.6 cm), you'd cut a piece of fabric that's 15 in × 9 in (38 cm × 23 cm).

    Tip: If you want a stiffer bow, apply iron-on interfacing to the underside of the fabric after you cut it. Just cut the interfacing to about the same size as your fabric rectangle, then iron it in place.

  2. Watermark wikiHow to Make a No Sew Bow
    Place the fabric so the longer side is in front of you, then run a thin line of glue all the way along the top and bottom of the material. Fold the top edge down to the center of the fabric and press it down, then fold the bottom edge up to the center in the same way. [20]
    • If you'd prefer, you can use double-sided fabric tape in place of hot glue.
    • Allow the glue to dry for about 30 seconds before you move on.
  3. Watermark wikiHow to Make a No Sew Bow
    Bring the right side of the glued fabric all the way over to the left side and line up the edges. Then, take a straight pin or a needle and push it through all of the layers of the material and back up again. [21]
    • This will hold the sides together as you shape the bow.
    • You can tie a piece of string around the bow instead of using a pin, if you'd prefer.
  4. Watermark wikiHow to Make a No Sew Bow
    Lay the fabric so both raw edges are laid flat—one on the left and one on the right. In addition, rearrange the center fold so the pin stays in the center, with folded bow loops on either side. [22]
    • Once you see a basic bow shape, you can remove the pin from the fabric. Just hold it in place with your fingers in the meantime.
    • The raw edges of the fabric will form the tails of your bow.
  5. Watermark wikiHow to Make a No Sew Bow
    After you remove the pin, wrap a piece of string around the center of the bow several times. Pull the string taut as you do this to create a defined center for your bow. Knot the ends of the string securely when you're finished. [23]
    • You'll cover this string in the next step, so it doesn't matter what color it is or how neatly you tie it.
  6. To cover the string, cut a small piece of fabric that matches your bow. Place a drop of glue on the underside of the bow in the center, the press the end of your fabric to the glue. Wrap the strip all the way around the bow, trim the excess, and glue down the other side. [24]
    • The width of your fabric strip can vary depending on your preference, but about 3 ⁄ 4  in (1.9 cm) and 2 in (5.1 cm) should be fine.
    • For a more subtle look, use the same fabric as the rest of your bow. However, you can create a cute contrast by using a different, complementary color, if you prefer.
    • To make a no-sew sailor bow, attach a barrette or an alligator clip to the back of your bow when it's finished!
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      Fabric Bow

      • Fabric
      • Scissors
      • Measuring tape or ruler
      • Iron
      • Hot glue gun or double-sided fabric tape

      Ribbon Bow

      • Grosgrain ribbon
      • Scissors
      • Lighter
      • Hot glue

      Bow with Tails

      • Fabric
      • Scissors
      • Hot glue or double-sided fabric tape
      • Straight pin or needle
      • String

      You Might Also Like

      Beat Boredom with These Creative Craft Ideas
      How to
      Make a Rubber Band Star
      How to
      Make a Cooler from Insulating Material
      How to
      Create a Time Capsule That’ll Withstand the Test of Time
      How to
      Build a Homemade Rube Goldberg Machine
      6 Simple Icee Slime Recipes: Blue Raspberry, Cherry, & More
      How to
      Build a Nativity Stable
      How to
      Make a Coupon Book for Tasks
      How to
      Cut Popsicle Sticks
      How to
      Make a Tin or Aluminum Foil Hat
      How to
      Build a Homemade Jack in the Box Toy
      Simple Steps to Clean & Polish Luxury Vinyl Plank Flooring
      How to
      Make Liquid Starch
      How to
      Make a Rolling Roller Coaster
      Advertisement

      References

      1. ↑ https://youtu.be/rMFree2Cyvo?t=91
      2. ↑ https://youtu.be/rMFree2Cyvo?t=106
      3. ↑ https://youtu.be/rMFree2Cyvo?t=134
      4. ↑ https://youtu.be/rMFree2Cyvo?t=157
      5. ↑ https://youtu.be/rMFree2Cyvo?t=175
      6. ↑ https://youtu.be/22mWTAZEswU?t=27
      7. ↑ https://youtu.be/rMFree2Cyvo?t=217
      8. ↑ https://sweetredpoppy.com/no-sew-girls-fabric-hair-bows/
      9. ↑ https://youtu.be/rMFree2Cyvo?t=293
      1. ↑ https://sweetredpoppy.com/no-sew-girls-fabric-hair-bows/
      2. ↑ https://youtu.be/upO4FXd7Fmc?t=9
      3. ↑ https://www.theribbonretreat.com/custom/modules/FreeProjects/PDFSealingRibbonEnds.pdf
      4. ↑ https://youtu.be/hX0pmMVZKoM?t=17
      5. ↑ https://youtu.be/hX0pmMVZKoM?t=37
      6. ↑ https://youtu.be/upO4FXd7Fmc?t=48
      7. ↑ https://youtu.be/upO4FXd7Fmc?t=58
      8. ↑ https://youtu.be/upO4FXd7Fmc?t=100
      9. ↑ https://youtu.be/upO4FXd7Fmc?t=126
      10. ↑ https://sewguide.com/make-a-big-bow/
      11. ↑ https://sewguide.com/make-a-big-bow/
      12. ↑ https://sewguide.com/make-a-big-bow/
      13. ↑ https://sewguide.com/make-a-big-bow/
      14. ↑ https://sewguide.com/make-a-big-bow/
      15. ↑ https://sewguide.com/make-a-big-bow/

      About This Article

      Article Summary X

      To make a simple fabric bow, you’ll need some fabric and a glue gun. Cut out a larger square of fabric, say, 5 by 5 inches, and a smaller strip, around 2 by 3 inches. Fold the larger piece lengthwise to crease it, then unfold it and refold the top and bottom edges so they meet at the crease and partially overlap. Iron the fabric flat, fold it in half widthwise, and iron it again to make a new crease. Unfold the cloth widthwise, then fold the ends in toward the new center crease and secure them with a dot of hot glue. Next, fold the smaller strip into thirds lengthwise and iron it. Bunch the bigger piece of fabric in the middle to create 3 accordion folds, and hold the folds in place by adding dots of glue between the creases. Wrap the smaller strip around the center of the bow and glue it in place. Keep reading to learn how to make a simple ribbon bow!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 97,892 times.

      Did this article help you?

      Advertisement