Download Article
Download Article
Origami is a fun a creative hobby that is perfect for children and adults alike. A fox is a perfect origami project because it is adorable and easy to make. Whether you choose to make a seated fox or just a fox head, you'll have a blast making this cute little creature.
Steps
-
Fold the square in half. Start by folding the lower left corner of your square up to meet the upper right corner of your square. You should be left with a triangle.
- Make sure the corners meet up perfectly. Your fox will look much more polished if your folds are precise.
- To avoid confusing yourself, don't change the orientation of your paper.
-
Fold two corners in to make a square. Next, fold the left corner of your square in to meet the upper right corner (the right angle). Do the same with the lower corner of your square.- You should be left with a small square with a crease diagonally down the middle where the two triangles meet.
Advertisement -
Flip your square over. Flip your square over so that all of the folds are facing away from you. Be sure to turn it over horizontally, not vertically.
- To confirm that you flipped the paper the right way, check to make sure that seam between the two triangles on the back of your square goes from the upper left corner to the lower right corner. If it doesn't, reposition the square so that it is oriented the correct way.
-
Fold the square in half. Keeping your square in the same position, fold the upper right corner down to meet the lower left corner. Be sure to match the corners up precisely before creasing your fold. .
- You should now have a right triangle, with the right angle on the lower left side.
-
Fold the left side over. Fold the entire left side of your triangle over to the right. Try to fold it so that the straight edge will intersect the remaining triangle in half. (It does not need to be precise.)
- At this point, you should have a skinny rectangle (that has a point on the upper right hand side) on the left of your piece. There should be a small triangle protruding from behind the rectangle on the right.
-
Unfold the rectangle. You will notice that the rectangle on the left side of your piece is comprised of two folds. Starting at the bottom of the rectangle, separate these two sections. Fold the top fold to the right and the bottom fold to the left.
- As you do this, you should notice a triangle that begins to emerge near the top. This is the fox's head.
-
Finish up your fox. To finish your fox, encourage the head to fold down by running your fingers along the crease. You can also fold the tail out to help it stand up. Lastly, you may decorate your fox's face in whatever way you choose.
- You can draw on a nose and eyes, or use googly eyes to give your fox its expression.
Advertisement
-
Fold your paper in half. Starting with the colored side of your paper facing down, fold your square in half diagonally. Make sure that the corners line up nicely and that you run your finger along the fold to make a good crease. [1] X Research source
- If you are using construction paper or printer paper, both sides will be colored, so it doesn't matter which side is facing down.
-
Fold your paper in half a second time. Keeping the first fold in place, fold your paper in half diagonally a second time. Once you have creased this fold, you can immediately unfold it. The purpose is to create a crease, but not to leave this fold in place.
- Be sure to leave the first fold in place. After this step, you should have a square that has been folded into a triangle once and has a crease down the middle.
-
Fold the point of the triangle down. Position your triangle so that the long side is facing towards you. Then fold the top point of the triangle down so that it just barely meets the long side of the triangle.
-
Fold the ears up. Keep the paper positioned so that the long side is facing towards you. Then fold up one of the bottom corners so that the point sticks up over the top of your paper. Do the same with the second bottom corner, trying to make sure the shape symmetrical. This will create the fox's ears.
- The higher you place your folds, the larger the ears will be. You can make them whatever size you want, but do your best make sure the two sides are the same size.
-
Create the face. Flip the paper over, and you should see the beginnings of a fox face. You should have a large triangle at the bottom (which is the face) and two triangles sticking up on the top from behind (which are the ears). To make it look more like a fox, draw on a face.
- Color in the bottom of the triangle with a black pen or marker to make the nose.
- Experiment with different expressions. The way you draw the eyes can make your fox look happy, sad, or angry.
- You can also put some googly eyes on your fox.
Advertisement
-
Decide what kind of paper you will use. Regardless of which kind of fox you want to make, you will need to start with a perfectly square piece of paper. Origami paper comes in perfect squares, so so won't have to worry about cutting it. If you don't have a square piece of paper, you can start with a standard 8 1/2 x 11-inch sheet of paper and use a simple folding technique to turn it into the perfect square. [2] X Research source
- You can use any color paper you want, but orange is a popular choice for foxes, since it is close to the color of a fox's hair.
-
Fold the left corner in. If your paper is not already a square, start by folding the upper left corner of your paper down to the right side, making sure that the upper right corner is creased perfectly in half.
- You should be left with a skinny rectangle at the bottom of the page.
- It's very important that your edges all line up. If they don't you won't have a perfect square.
-
Fold the right corner in. Next, fold the upper right corner of your paper so that it meets the bottom corner of your previous fold.
- At this point, you should have a triangle at the top and a skinny rectangle at the bottom.
-
Fold the rectangle. Fold the rectangle on the bottom under your triangle. Run your finger along this fold to make a very good crease.
- At this point, you should have a large triangle with two smaller triangles protruding from behind it (one on each side).
-
Unfold and cut. Lastly, unfold your piece of paper and cut the rectangle off of the bottom. This will leave you with a perfectly square piece of paper that you can use for any origami project.
- If you created a really solid crease, you may also be able to tear the rectangle off, but be careful to do it cleanly.
Advertisement
Expert Q&A
Search
-
QuestionAre there any special tools or supplies that I need to have when folding origami?Robert Homayoon is an Origami Expert known for his engaging YouTube videos and accessible instructions. He has been teaching origami on YouTube since 2009. His channel has a following of over 676,000 subscribers, and his videos have garnered over 211 million views. Robert uses his channel to highlight his passion for teaching people origami, crafts, and how to solve puzzles. He graduated from SUNY Albany in 2007 and earned his D.M.D degree from Temple University Dental School in 2013.When it comes to tools for origami, there are specific items available, such as creasing tools, that sometimes come in origami packs. These tools can be used instead of using your fingers to create creases. Personally, I often rely on my hands and fingernails for creasing, finding them sufficient for the task. For my tutorials, I typically use printer paper as my medium of choice. This is because printer paper is more universally accessible compared to origami paper, which often requires a visit to a store or purchasing a kit. When starting with printer paper, you may need a pair of scissors to trim the edges and make the paper square. I take this approach in my tutorials because I recognize that many people have printer paper readily available. Origami paper, designed specifically for origami, has a thinner consistency than printer paper, making it an excellent option if you have it on hand. However, if origami paper is not accessible, using printer paper is a viable alternative. The beauty of origami lies in its simplicity, transforming a piece of paper into a work of art with minimal materials.
-
QuestionHow do I fold an origami swan?Robert Homayoon is an Origami Expert known for his engaging YouTube videos and accessible instructions. He has been teaching origami on YouTube since 2009. His channel has a following of over 676,000 subscribers, and his videos have garnered over 211 million views. Robert uses his channel to highlight his passion for teaching people origami, crafts, and how to solve puzzles. He graduated from SUNY Albany in 2007 and earned his D.M.D degree from Temple University Dental School in 2013.Start by folding the paper into a triangle and forming a kite base. After folding the edges of the kite, perform a reverse fold to shape the head. Then, fold the model in half, adjusting the neck as needed. This particular swan design is straightforward and suitable for younger kids who are just beginning with origami. The traditional kite base involves folding the paper's edges into the center diagonally. Afterward, fold the edges into the center again, potentially flipping the paper to achieve a color reversal on the tail if using origami paper. For added visual interest, origami paper with different colors on each side can be used. To complete the swan, fold in the neck, bring the head down, and fold the entire model in half. Extend the neck to create the swan's form, and if desired, fold the wings downward to finish the origami swan.
-
QuestionCan I use sellotape for eyes?Community AnswerCutting out masking tape circles can be an alternative to traditional googly eyes, as well as cutting out paper and sticking it on or drawing directly on the origami paper itself.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- The firmer the crease, the better and more defined the image.Thanks
- Thin Origami paper is easier to fold but can be torn easily.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about origami, check out our in-depth interview with Robert Homayoon .
References
About This Article
Thanks to all authors for creating a page that has been read 130,571 times.
Reader Success Stories
- "I love foxes! At first I didn't think I could do this, but I did. It is so easy!"
Advertisement
"I love foxes! At first I didn't think I could do this, but I did. It is so easy!"
"Looks easy and fun on a winter's day - something to try and share with friends!"
"I made a crystal fox."
