How to Make a Pin

PDF download Download Article
PDF download Download Article

Pins are a great way to show off your individuality. Unfortunately, it can be difficult to find that perfect pin. Luckily, it is easy to make a pin using a few supplies from around your home and a flat backed safety pin. Once you know the basics, you can make all sorts of pins.

Method 1
Method 1 of 3:

Making a Basic Pin

PDF download Download Article
  1. Aim for something that is about 1 inch by 1 inch (2.54 centimeters by 2.54 centimeters). If necessary, resize the image using an image editing program or a photocopier.
  2. You will need this excess material to wrap around the back of your pin.
    Advertisement
  3. The cardboard will make the base for your pin. The colored paper will make the back. The colored paper can be solid-colored, or it can have an interesting pattern.
  4. Turn the image over so that the back is facing you. Spread a thin layer of glue onto it. You can use a glue stick or school glue. If you are using school glue, you might want to apply it with a paintbrush.
  5. Try to center the cardboard as much as possible. You should have a ½ inch (1.27 centimeters) border all around the cardboard.
  6. Start with the corners first. Once you have them glued down, fold all four side over onto the back of the cardboard. This will give you some nice, folded seams.
  7. Coat the paper with glue, then press it onto the back of the cardboard. You can use a glue stick or school glue for this. If you are using school glue, you might want to apply it using a paintbrush.
  8. You can use any sort of finish you like: matte or glossy; glossy, however, will look the best. Paint the front first, let it dry, then do the back. This will "seal" your pin and protect it.
    • If you are using a decoupage glue, you may need to apply 3 to 4 layers. Let each layer dry before you apply the next one.
    • Acrylic sealers come in brush-on and spray-on form.
  9. Draw a line of hot glue across the back of the pin. Quickly press the back of the pin down into the glue.
    10. Advertisement
Method 2
Method 2 of 3:

Making a Pin Using Found Items

PDF download Download Article
  1. The item should be no larger than your thumb. Flat items are best, but you can use a slightly-raised item, such as a button or cabochon. Here are some items that make great pins:
    • Cabochons
    • Decorative buttons (such as coat buttons)
    • Embroidered patches
    • Metal bottle caps
    • Wooden shapes
  2. Soak a cotton ball or tissue with rubbing alcohol and run it across the back of the item. This will get rid of any oils or dirt that might prevent the glue from sticking properly.
  3. When you place the safety pin behind your found object, you should not see it sticking out.
  4. You can use hot glue, but super glue or epoxy glue will work even better.
  5. Flip the object over, so that the back is facing you. Quickly press the safety pin onto the back. Try to align it horizontally, and make it as centered as possible.
  6. If you are using hot glue, this will only take a few minutes. If you are using super glue or epoxy glue, this may take several hours.
    7. Advertisement
Method 3
Method 3 of 3:

Making a Pin Using Shrink Plastic

PDF download Download Article
  1. Aim for something that is about 3 inches (7.62 centimeters). Remember, the image will shrink down to ½ to 2/3 of its original size by the time you are done. [1] You can use any sort of image you like, but simple outlines (like those from a coloring book) might be easier to work with.
    • If the image is on your computer, you will need to print it out onto regular printer paper.
    • You can resize the image using an image editing program or a photocopier.
  2. Use a fine grit sandpaper, and lightly buff the surface of the shrink film. This will help the paint stick better. It is not necessary for colored pencils or markers.
  3. Try to go over the lines as smoothly as you can. If the shrink plastic moves around too much, you can tape it down to the table.
    • If you can't find shrink film, you can use any type of number 6 plastic. It is usually found on take-out containers. Look for the recycling symbol on the container. There should be a number inside of it. If it is a 6, you can use it.
  4. Try to stick within the lines as much as possible. If you go over the lines, don't worry; you will be re-outlining the piece again. If you are using acrylic paints, be sure to thin them down first using a little bit of water. This will give you a smoother finish. It will also prevent the paint from clumping up after you back it. [2]
  5. If you colored your design using markers or paint, wait for everything to dry first, or it will smear.
  6. You can use a pair of scissors or a craft knife to do this. Make sure that you cut right along the outline; try not to leave any white edges.
  7. If your package does not have any instructions, bake the shapes at 350°F (176.6°C) in a pre-heated oven until the pieces lay flat. This can take anywhere between 5 minutes and 35 minutes. [3]
    • Don't worry if the pieces start to warp and curl while baking. They will eventually flatten back out.
    • If you are using number 6 plastic, bake the pieces at 350°F (176.6°C) for about 3½ minutes.
  8. If you want, you can bend them while they are still warm to give then an interesting shape.
  9. You can use a spray-on or brush-on sealer. You can even paint on a few layers of a decoupage glue. Apply 3 to 4 layers; let each layer dry before you add the next one. This will give your pin a nice finish. It will also seal your art work and keep it from chipping. [4]
  10. Draw a line of hot glue across the back of the safety pin. Quickly flip the shape over, and press the safety pin onto the back. Try to center it as much as possible.
    12. Advertisement


Community Q&A

Search
Add New Question
  • Question
    How do I put a new image/piece of paper into an already existing pin?
    T. Chinsen
    Top Answerer
    Without seeing the pin, it is difficult to determine the best method. The instructions explain how to cut and attach an image to card and then seal it. You can modify the shape and size of your image to match your pin. Simply follow the instructions and attach it to your pin. Use a jewelry glue like E6000 to prevent it from peeling away from the pin surface.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You can find flat backed safety pins in fabric stores and in art and crafts stores.
        Thanks
        Helpful 3 Not Helpful 0
      • Hot glue will work well enough, but if you want your pin to be more durable, you will need to use super glue or epoxy glue.
        Thanks
        Helpful 2 Not Helpful 0
      • Make sure that the flat backed safety pins don't have adhesive on the back. This adhesive is not strong enough.
        Thanks
        Helpful 2 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Hot glue can cause blisters if you are not careful. If you are worried about this, consider using a low-temp hot glue gun instead of a high-temp one. It will be less likely to cause blistering.
        Thanks
        Helpful 3 Not Helpful 0
      • Hot glue will heat up your safety pin, so be careful when your gluing it down.
        Thanks
        Helpful 4 Not Helpful 1
      Advertisement

      Things You'll Need

      Making a Laminated Pin

      • Small image
      • Colored paper (for backing)
      • Thin cardboard
      • Glue stick or school glue
      • Acrylic sealer or decoupage glue
      • Paintbrushes
      • Flat backed safety pin
      • Hot glue and hot glue gun

      Making a Pin Using Found Items

      • Found item
      • Hot glue and hot glue gun
      • Flat backed safety pin
      • Rubbing alcohol
      • Cotton ball or tissue

      Using Shrink Plastic

      • Shrink film or shrink plastic
      • Permanent marker (black is recommended)
      • Fine grit sandpaper
      • Markers, colored pencils, or acrylic paint
      • Paintbrushes, water, and paint pallet (if using acrylic paint)
      • Acrylic sealer or decoupage glue
      • Flat backed safety pin
      • Hot glue and hot glue gun


      You Might Also Like

      How to
      Make Handmade Jewelry
      How to
      Put a Picture in a Locket
      3 Gorgeous Paper Rings You Can Easily Make at Home
      How to
      Resize a Ring
      How to
      Make a Button Pin
      How to
      Solder Jump Rings
      How to
      Wire Wrap Stones
      How to
      Create Jewelry Using Your Breastmilk
      How to
      Make a Ring
      How to
      Make Resin Jewelry
      How to
      Make Sterling Silver Jewelry
      How to
      Make a Badge Pin
      How to
      Make Wooden Rings
      How to
      Make Enamel Pins
      Advertisement

      References

      1. ↑ http://thehousethatlarsbuilt.com/2016/02/shrinky-dink-valentines-day-pins.html/
      2. ↑ http://persialou.com/2015/12/5646.html
      3. ↑ http://everydaydishes.com/creative-crafts/diy-shrinky-dinks-jewelry-craft/
      4. ↑ http://www.rookiemag.com/2012/10/diy-decoupage-badges/

      About This Article

      Article Summary X

      To make a basic square pin, start by finding a small, square-shaped image, such as a photo from a magazine. When you cut out the image, leave a small border that you can wrap around the backing of the pin. Next, glue the image to a cardboard square of the same size and wrap image border around the cardboard. When that’s done, glue a colored paper square onto the back of your pin as a backing and seal the image with decoupage glue. Finally, hot-glue a safety pin to the back of your pin. Read on to learn how to make a pin out of found objects or shrink plastic!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 69,112 times.

      Did this article help you?

      Advertisement