Download Article
Download Article
Snow globes are a great gift, but what if you want something a little more personal? Whether you're looking to decorate your own space or give a thoughtful gift, a homemade snow globe can be an easy, thoughtful, inexpensive gift. And you may already have everything you need at home!
Steps
-
Pick a theme. If you want it to be Christmas-related, a snowman or pine tree might work. If it's for a birthday, try a small toy. For a personalized snow globe, try a heavily laminated photo, glued to a cork or another base.- Make sure your figure is waterproof and fits on the jar lid and inside the jar. Ensure there's a good flat surface to glue down. [1] X Research source
- Ceramic or plastic are good bets. If you're not sure, place your figurine in a bowl of water for a few hours and see if anything happens.
- You can also make your own figure out of sculpey clay. It's easy to find in craft stores and comes in a variety of colors. [2] X Research source
-
Find a good jar. Any size can work, from a baby food jar to a spaghetti sauce jar to a large mason jar. Make sure there are no cracks and that it can be closed tightly.- Test out the seal on your jar ahead of time. Fill it with water, close it tightly and turn it over—nothing should leak out.
- Wash your jar with hot, soapy water, remove any labels or glue remaining, and make sure it's totally dry before proceeding.
- You'll also need a place your craft can dry overnight, undisturbed.
- Once you've got a figure and a jar, try placing it in different positions to figure out what looks best and which side you should glue down.
Advertisement -
Gather your supplies. Most craft stores or general retailers will have anything you don't already have at home. Besides a jar and a figurine, you'll also need:- Waterproof craft glue or epoxy
- Glitter or fake snow
- Bottled water, which is less likely to cloud up
- Glycerin or baby oil (optional, but it thickens the water and makes the “snow” fall more slowly)
Advertisement
-
Position your figurine. Remove the lid from your jar and find out where you want to place your figurine. Model it in different positions and try the jar over top. Once you have found the right pose, apply your adhesive sealant to the bottom of the figurine. Then, press the figurine down onto the lid, and hold it for about 2-5 seconds depending on the size. -
Let it dry. It could take up to 24 hours, but check your glue packaging for drying times. Find a place to set it where it won't be disturbed. Make sure the figurine on your lid is nice and secure before proceeding. -
Fill the jar with water. Bottled water is ideal and will be clearer. Leave a little room at the top for glycerin, glitter and space for your figurine. -
Add the glycerin. Use a few drops to about a teaspoon, depending on how big your jar is. Glycerin is optional, but will let your glitter or "snow" fall down more slowly. Baby oil should accomplish the same thing. [3] X Research source -
Pour in some glitter. Using plastic glitter, sprinkle 1-2 teaspoons into the water. You may want to use more for a bigger jar, but don't overdo it or your snow globe will look hazy. Use a long-handled spoon to mix well. -
Seal the lid. Keeping the glass jar right side up, just place your lid onto the top of the jar, and seal it. If there's any extra water, it might leak a little, but that's okay. Turn it over gently and see if there are any leaks. Check for extra space at the top, too, and turn the jar back over and add a little more water if needed.- Let it sit for a few days to make sure there are no slow leaks or problems. Once you're sure everything is good, you may want to glue your jar shut permanently with epoxy or hot glue.
-
Shake it up. Shake your snow globe gently and enjoy your lovely craft! Display it on a windowsill, bookshelf or anywhere else you'd like to show off your handiwork.
Advertisement
Community Q&A
Search
-
QuestionWhy do I have to use bottled water?Community AnswerYou need to use bottled or distilled water because tap water has impurities that can discolor or cloud the water over time. Distilled water works the best because all of the dissolved minerals have been removed.
-
QuestionCan I use styrofoam instead of glitter?SparkleGirlCommunity AnswerNo, styrofoam floats. It will stick to the top and not work. You can try beads.
-
QuestionWhy is the glitter sticking to my figures?Community AnswerThis is most likely happening because you didn't add glycerin or baby oil.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Be sure to get all the sticker residue off the jar so that you can’t see that the sticker was there.Thanks
- Try to add very little glycerin/baby oil. It may cause damage later on.Thanks
- Use bottled water for best results.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Try to use glitter instead of fake snow because it might melt if you keep your snow globe for years to come.
- Use toothpaste and a hair dryer to get the sticker completely off the jar.
- Use super glue or glue gun to make the figurine stick to the lid faster.
- Have a paper towel around just in case you spill some water.
- Try to use glass jars rather than plastic jars.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Bottled water
- Empty jar with resealable lid
- Ornaments or any decorations or figurines you want in your snow globe
- Glycerin or baby oil
- Glitter
- Waterproof craft glue, epoxy, or a hot glue gun
Expert Interview
Thanks for reading our article! If you’d like to learn more about crafting, check out our in-depth interview with Diane Henkler .
References
About This Article
Article Summary
X
To make a snow globe in a jar, choose a theme and pick a waterproof figure like an angel or snowman as your centerpiece. Next, find a clean, airtight jar and gather waterproof glue, glitter, water and baby oil for your project. Start by gluing your figure to the inside of the top. Let it dry, then fill your jar with water, but leave enough room to add a few drops of baby oil and a couple teaspoons of glitter. All you need to do next is seal the jar and shake! For suggestions on how to make your own figurine, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 433,346 times.
Reader Success Stories
- "I love this idea, because I love to make gifts, and this would be perfect. I am going to figure out what to purchase to add a photo that won't get wet, thank you for posting this." ..." more
Advertisement
88%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I love this idea, because I love to make gifts, and this would be perfect. I am going to figure out what to purchase to add a photo that won't get wet, thank you for posting this."
..."
more
"Thought this was gonna be another off-the-wall site, but boy was I ever wrong. It's the perfect site, will be using it more. Thank you for what you all have done, it's great!"
..."
more
"All the tips helped me. I had some old knick knacks and I upcycled them for some Christmas gifts. Hopefully the family likes them. Thanks, wikiHow."
..."
more
"I didn't know what glycerin was until I needed it the most, so you taught me two new things today. I look forward to reading more articles!"
..."
more
"This story helped me because I needed to show my class how to make a snow globe. I didn't know how, so I came to you guys."
..."
more
