10
readers  helped!

This helped me

How to Make a Wine Glass in Blender

Blender is a 3 dimensional software that has a bit of a learning curve. However, with this tutorial, you can finally begin to use Blender. Read on to learn how.

Part 1
Part 1 of 3:

Making the Wine Glass Cup

  1. 1
    Open Blender and delete the default cube.
  2. 2
    Be sure that you have the Cycles Render option. Also, make sure that you have Default for the other option.
    Advertisement
  3. 3
    Click on Add >> Mesh >> Cylinder.
  4. 4
    Change to the front view. Do this by pressing the 1 on the numeric keypad.
  5. 5
    Zoom in closer or press "." on the numpad to focus on a given selected object.
  6. 6
    Press 5 on the numeric keypad to change the perspective.
  7. 7
    Click on the Viewport Shading and select Wireframe. Then change the Object Mode to Edit Mode.
  8. 8
    Press Ctrl R to loop-cut.
  9. 9
    Holding the cursor over the center of the cylinder, roll up the mouse wheel. Do this until you see three rings and then click on the cylinder.
  10. 10
    Press the A key. This will deselect everything.
  11. 11
    Press B on your keyboard, position the cursor to the very top left of the cylinder and select the top line. However you do it, you are selecting the top row.
  12. 12
    Click on S. This is for scaling your selection. Reduce it by 1 grid mark and click the left mouse button.
  13. 13
    Press A to deselect.
  14. 14
    Press B and select the center ring.
  15. 15
    Press S (for scale) and Increase by 1 grid mark.
  16. 16
    Press A to deselect.
  17. 17
    Press B to select the ring above the center one.
  18. 18
    Press S and increase by 1/2 grid mark.
  19. 19
    Press A to deselect.
  20. 20
    Press B to select the ring below the center one.
  21. 21
    Press S and decrease by 3 grid marks. This is what it should look like at this point.
  22. 22
    Press A to deselect.
  23. 23
    Press B to select the ring below the center one.
  24. 24
    Press S and decrease to 4 grid marks.
  25. 25
    If you have a grid at the top, right click to select it and press delete. From the options, select Vertices. That is what you will be deleting.
    Advertisement
Part 2
Part 2 of 3:

Making the Wine Glass Stem

  1. 1
    Press 1 on the number pad for the front view.
  2. 2
    With the bottom of your glass still selected, press E to extrude.
  3. 3
    Pull down (extrude) 2 grid marks. Click the mouse button to set the length.
  4. 4
    Press S and then reduce the width by 2 grid marks.
  5. 5
    Press E to extrude.
  6. 6
    Pull down to the second major gridline and then go back three minor gridlines.
  7. 7
    Press E to extrude.
  8. 8
    Bring down 1 grid mark.
  9. 9
    Press S and widen by 2 grid marks.
  10. 10
    Press E to extrude.
  11. 11
    Bring down 1 grid mark.
  12. 12
    Press S and widen by 5 grid marks on each side for a total of 10.
  13. 13
    Press E to extrude.
  14. 14
    Bring down 1 grid mark. That is the basic wine glass bottom. If you've done it right, it should be 'sitting' on the major gridline.
  15. 15
    Change the Viewport Shading to Solid and Edit Mode to Object Mode.
  16. 16
    Zoom out a little bit and press Shift and the middle mouse button to pan your object.
  17. 17
    Make sure your wine glass looks about right. It should look something like this screenshot.
    • The grid (if you have one) is not a vertex, it is a face. Press one, change to wire frame mode, make sure to be in Ortho instead of perspective (5), then select (B) all the vertices of the top of the class, (Make sure you are in edit mode, press delete, a menu should appear). Move to Delete face, Click it.
  18. 18
    Press Smooth on the left side of your screen to smooth out some of the rough edges on your wine glass.
  19. 19
    On the right side of the screen, click on the wrench (object modifiers).
  20. 20
    Click on Add Modifier >> Subdivision Surface. This will smooth the shape even more.
  21. 21
    Change the Views and Render to three (3). You could make it higher, but it would take longer to actually render.
  22. 22
    Press 5 to change your perspective. Using the scroll wheel, if you have one, zoom out.
    Advertisement
Part 3
Part 3 of 3:

Finishing the Wine Glass

  1. 1
    Place the cursor somewhere below your glass, like in the screenshot. This is where the next element of the image will be added.
  2. 2
    Go to Add >> Mesh >> Plane. This will insert a plane below your wine glass.
  3. 3
    With the plane selected, press S to scale it and make it larger. Like the size of a table to your wine glass.
  4. 4
    With the plane still selected, go to the right of your screen and click on the material icon. (It should actually still be selected).
  5. 5
    Select the Diffuse BSDF option, and then select a color similar to the one you see in the screenshot.
  6. 6
    Add another plane for your light source. To do this, click behind your camera to place the cursor there.
    • Select Add >> Mesh >> Plane.
    • Press R to rotate the plane so that it will provide a reflective surface for your glass and light source.
    • Press S to scale the plane. It should look similar to what you see in this screenshot.
  7. 7
    With the plane still selected, go to the material section that you went to before. For the material, select Emission. For Strength, enter 10.
  8. 8
    Right click on the first plane to select it, and then, by using the blue arrow and holding down on the left mouse button, raise the plane until it just covers up the bottom of the glass. Once it does that, lower the plane until it is just below the wine glass.
  9. 9
    Change your perspective by pressing 0 (zero). You want to now look at the wine glass through the perspective of the camera.
  10. 10
    If you need to adjust your view, change your properties.
    • Go to View >> Properties (lower left).
    • Find the checkbox beside Lock Camera to View. Once this is done, if you need to move your glass; make sure it is selected, then holding down the shift key and your center mouse button (or your scroll wheel) and move the glass. You can also use the scroll wheel to zoom in and out.
  11. 11
    If you haven't done this yet, save your work.
  12. 12
    Duplicate your wine glass by pressing Shift D. It will superimpose the new wine glass directly on top of the 'old' one.
  13. 13
    Move it so that it stays in line with the original wine glass. Do this by pressing X so that it moves on the X axis.
  14. 14
    Since you are still 'in your camera', move your wine glasses so that they are both in the proper perspective.
  15. 15
    You are done with the properties, so go back to View >> Properties, which will close that dialog box.
  16. 16
    Look at your progress. Click on the Camera icon on the right and then click on image without changing anything else. It is set at a minimal number (10), so it shouldn't take very long. Here is what it looks like at this point.
  17. 17
    On the right of your screen, look for the Integrator section. If it is collapsed, click on the arrow.
  18. 18
    Watch your render and see if it is turning out the way you like. If not, press ESC. Press ESC again and then press 0 (zero). This will toggle the view away from the camera.
  19. 19
    Right click on the plane that is 'emitting the light'. Instead of 10 for the strength, change it higher...like 15 or 20.
  20. 20
    Go back to rendering your glasses until you have the look you want.
  21. 21
    Save it. You will want to save a graphic version (not just for Blender) of your file.
    • Hover your mouse over your image and press F3. Select your format type and name and you are done.
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    My glass is coming out white instead of clear. What should I change?
    Community Answer
    Make sure under the Material Properties tab for the Glass you set the Surface to Glass instead of Diffuse BSDF.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 8
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Advertisement

      Video

      Tips

      • If you do not see a grid once you start making adjustments, press 1 again. It should show up.
        Thanks
        Helpful 1 Not Helpful 0
      • If your wine glass still doesn't look right, the chances are, you don't have the reflective plane in the right location.
        Thanks
        Helpful 1 Not Helpful 0
      • Your resolution is at 50%. You can experiment with adjusting it higher. Keep in mind that it will take longer to render.
        Thanks
        Helpful 1 Not Helpful 0
      Show More Tips
      Advertisement

      Things You'll Need

      • A 3 button mouse with scroll wheel

      You Might Also Like

      Change Your Cameos Selfie in Snapchat: 2 Simple Methods
      How to
      Log in to WeChat
      How to
      Call Someone on a Computer
      How to
      Copy a QR Code on Android
      How to
      Recover Deleted Messages in WhatsApp
      The Beginner's Guide on How to Use Clubhouse (& Host Your Own Room)
      How to
      Select Multiple Files on Windows 11
      How to
      Use Microsoft Whiteboard
      Bing with ChatGPT: Beginner's Guide to Microsoft's AI Chatbot
      How to
      Turn Off Notifications on PC or Mac
      How to
      Find an Office Product Key
      How to
      Collaborate on YouTube
      How to
      Access Amazon Prime on TV
      How to
      Organize Bookmarks in Firefox
      Advertisement

      About this article

      Thanks to all authors for creating a page that has been read 88,187 times.

      Is this article up to date?

      Advertisement