How to Melt Candy Melts

Co-authored by Maria Short

Last Updated: November 16, 2024 References

Candy melts are often used to make candy and coat cake pops. They are similar to white chocolate, but don't actually contain any cocoa. As such, you can't melt them the same way that you would melt white, milk, or dark chocolate. While you can always refer to the instructions printed on the back of the bag, there are a few tricks that you can use to ensure that you end up with a perfect batch each time. ^{[1]
X
Research source}

Method 1

Method 1 of 4:

Microwaving Candy Melts

Download Article

1
Empty a package of candy melts into a microwave-safe bowl. Most packages contain 12 to 16 ounces (340 to 452 g) of wafers. If your package contains more than that, measure out 12 to 16 ounces (340 to 452 g) of wafers into a bowl and save the rest for later. ^{[2]
X
Research source}
- Alternatively, empty the candy melts into a heavy-duty, plastic, resealable bag, then zip it tightly.
- For a smaller batch, fill a plastic piping bottle halfway with candy melts instead. Leave the bottle's lid off.
2
Heat the candy melts in the microwave for 1 minute at about 40% power. Do not use full power; slow and steady is the key here. If you use full power, the wafers may overheat and turn hard, like seized chocolate. ^{[3]
X
Research source}
- Depending on the strength of your microwave, you may have to go as low as 30% power or as high as 50%. Do not go higher than 50% power, however. ^{[4]
  X
  Research source}
Advertisement
3
Stir the candy melts with a rubber spatula. Use a pot holder or oven mitt to take the bowl out of the microwave. Give the wafers a stir with a rubber spatula. Don't worry if they don't look fully melted yet. ^{[5]
X
Research source}
- If you're using a plastic bag, gently massage the bag. Use a towel or oven mitt to protect your hand.
- If you poured the wafers into a bottle, knead the bottle instead. If the bottle is too hot, cover your hand with a towel or oven mitt to protect it.
4
Heat and stir the wafers at 30-second intervals until they melt. Pop the bowl back into the microwave and heat it for 30 seconds at 40% power. Take the bowl out, then give the wafers a stir. Repeat this process until the candy takes on a honey-like consistency. ^{[6]
X
Research source}
- As the candy continues to melt, reduce the intervals to 20 and then to 15 seconds to prevent overheating. ^{[7]
  X
  Research source}
- If you put the candy into a plastic bag, massage the bag after each 30-second interval.
- If you are using a plastic bottle, heat the bottle at 15-second intervals instead. Stir the candy melts with a skewer or knead the bottle with your hands.
5
Use the candy as desired. Pour it into plastic candy molds, drizzle it over homemade chocolate, or dip cake pops into it. Be sure to work quickly, however, or the candy will harden.
- If the candy does harden, just pop it back into the microwave for 10 to 15 seconds, then give it a stir.

Method 2

Method 2 of 4:

Using a Double-Boiler

Download Article

1
Fill a pot with water 2 inches (5.1 cm) of water. This will be your double-boiler, so make sure that the bottom of the heat-safe glass bowl that you'll be using doesn't touch the water. If you need to, set the bowl on top of the pot to test it out, but be sure to take it off later. ^{[8]
X
Research source}
- The water should be about 1 inch (2.5 cm) away from the bottom of the bowl.
- This method works the best for dipping cake pops and fruit.
This is important; if you leave the pot on the stove, the candy will overheat and burn. Low heat is key to melting the candy. ^{[9]
X
Research source}
3
Place the bowl on top of the pot, then add the candy melts. Make sure that the bowl is made from glass and heat-safe. A metal bowl will generate too much heat, and a plastic bowl may warp. You can try using an actual double-boiler made from 2 pots, but it may get too hot. A bowl would be much better.
- How many wafers you depends on the amount you need. You can use the entire bag or just a portion.
4
Stir the wafers until they melt and achieve a honey-like consistency. Use a rubber spatula for this, as the melting wafers may stick to a wooden or metal one. As you continue to stir, the wafers will soften and melt together. ^{[10]
X
Research source}
- The candy is ready when it is smooth and dribbles slowly off of the spatula, like honey.
5
Use the melted candy for your project. Leave the bowl on the pot if you are dipping things into it, like cake pops, marshmallows, or strawberries. This way, the candy will remain fluid and easy to work with.
- If you want to use the candy for drizzling or filling molds, scoop it up with a spoon or sauce ladle.

Method 3

Method 3 of 4:

Using a Slow Cooker for Large Amounts

Download Article

1
Empty 1 package of candy melts into a slow cooker or crock pot. A typical package of candy melts contains about 12 to 16 ounces (340 to 452 g) of wafers. If your package is larger than that, measure out 12 to 16 ounces (340 to 452 g), and start with that. ^{[11]
X
Research source}
- This method is ideal for large amounts of candy melts, between 3.5 and 5 pounds (1.6 and 2.3 kg), or 3.5 to 5 bags.
- You will be adding more candy melts into the slow cooker later.
2
Turn the slow cooker onto a LOW heat setting. Never use a high heat setting, as this will cause the candy to burn. The key to melting the candy perfectly is to use a low, slow heat. ^{[12]
X
Research source}
- Make sure that your slow cooker is on a heat-safe surface, such as tile or marble.
3
Allow the wafers to melt for about 20 minutes, stirring occasionally. How long it takes for the wafers to melt will vary a little each time, but expect it to take about 20 minutes. Use a rubber spatula to stir the candy every so often to help it melt faster. ^{[13]
X
Research source}
- Do not get impatient and turn the heat up. The candy will burn.
4
Add a second package of candy melts and stir it until it melts. This second batch shouldn't take as long to melt as the first batch. Expect this batch to take anywhere from 10 to 15 minutes. ^{[14]
X
Research source}
- Be sure to scrape the bottom of the slow cooker. This will ensure that everything melts evenly.
5
Continue to add bags of candy melts until you get your desired amount. Wait for each batch to melt before adding another bag. Plan on using between 3.5 and 5 bags of candy melts total. ^{[15]
X
Research source}
- As you add more batches of candy, they will melt faster and faster.
6
Switch the slow cooker to a WARM setting, then use the candy as desired. This setting will keep the candy in a fluid state without actually overheating it. This is perfect for projects like cake pops. If you wish to use the candy to fill molds or drizzle over things, you can turn the slow cooker off.
- Use a spoon or sauce ladle to scoop the melted candy up and drizzle it over treats. You can also use a spoon or sauce ladle to pour the candy into molds.

Method 4

Method 4 of 4:

Coloring, Flavoring, and Thinning Candy Melts

Download Article

1
Add colored wafers to a batch of white wafers to create pastel shades. Empty a bag of white wafers into your bowl, pan, or slow cooker, then add a handful of colored wafers. Melt the candy as desired, then add in more colored wafers until you get the shade you want. ^{[16]
X
Research source}
- Colored candy melts are vibrant, so it's easier to color a batch of white wafers with a few colored ones than the other way around.
2
Mix 2 or more colors to create a new color. Candy melts come in all sorts of colors, but if you want a specific color, like blue-green or red-orange, you will have to mix it yourself. Simply add a little bit of each color (not the entire bag) into your bowl, pot, or slow cooker, then melt it as directed. ^{[17]
X
Research source}
- Check the manufacturer's website; sometimes they post color combinations.
3
Use oil-based food coloring and white wafers as an alternative. Use a toothpick or skewer to pick up a drop of oil-based food coloring, then dip it into the melted candy. Stir it in with a rubber spatula. Add more drops until you get the color you want. ^{[18]
X
Research source}
- Do not use liquid food coloring, or the candy will seize. You can find oil-based food coloring in the baking section of a craft store.
4
Flavor candy melts with oil-based candy flavoring, if desired. Melt the wafers using 1 of the methods above, then stir in 1/4 to 1/2 teaspoon of oil-based candy flavoring. Do not use regular extracts, as these are water-based and will cause the candy to seize. ^{[19]
X
Research source}
- You can find oil-based candy flavoring in the baking section of a craft store.
- A dram is the same thing as a bottle.
- Candy melts taste like vanilla on their own. Candy flavoring can give more unique flavors, like strawberry.
5
Stir in 1 teaspoon of shortening if the candy melts are too thick. The melted wafers should be thin enough to drip off a spoon like honey. Sometimes, however, the melted candy is too thick to do that, even after it's been melted. If that happens, stir in 1 teaspoon of shortening for every 12 to 16 ounces (340 to 452 g) of candy melts. ^{[20]
X
Research source}
- If you put the candy into a plastic bag, open the bag first, then add the shortening. Close the bag, and massage the shortening in.
- For plastic bottles, add the shortening into the bottle, then stir it in with a skewer.

Community Q&A

Search

Add New Question

Question

I used Wilton candy melts to make a lollipop. The chocolate I used looks cracked and old once hardened in the mold. Does that mean the chocolate is old? Or did I do something wrong in the melting process?

Sage Hudson

Community Answer

The chocolate is most likely old. Throw it away. Candy melts don't last as long as normal chocolate, because they're not technically chocolate at all. If you've had the melts for more than 2-3 months, it's time to toss them.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 5

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Use your candy melts within 3 months of buying them. After 3 months, they won't be as fresh anymore, and may not melt properly. ^{[21]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Make new wafers with leftover candy on a sheet of wax paper. Peel them off once they harden, then store them in a plastic bag. ^{[22]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
If the candy is still too thick after you add shortening, you may have overheated it. In this case, discard the candy and try again.

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Avoid adding too much shortening. If you do, the candy may not set up properly.

Thanks
Helpful 0 Not Helpful 1
Avoid getting the melted candy wet, or it may seize. If it seizes, stir in some shortening. If that doesn't fix it, toss it and melt a new batch. ^{[23]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

Microwaving Candy Melts

Microwave-safe bowl
Rubber spatula
Candy melts

Using a Double-Boiler

Large saucepan
Heat-safe glass bowl
Rubber spatula
Candy melts

Using a Slow Cooker for Large Amounts

Slow cooker
Rubber spatula
Candy melts

Coloring, Flavoring, and Thinning Candy Melts

Oil-based food coloring (optional)
Oil-based candy flavoring (optional)
Shortening (optional)

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

Log in

How to Melt Candy Melts

Steps

Microwaving Candy Melts

Using a Double-Boiler

Using a Slow Cooker for Large Amounts

Coloring, Flavoring, and Thinning Candy Melts

Community Q&A

Tips

Warnings

Things You'll Need

Microwaving Candy Melts

Using a Double-Boiler

Using a Slow Cooker for Large Amounts

Coloring, Flavoring, and Thinning Candy Melts

You Might Also Like

Expert Interview

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories