How to Mend a Crack in Pottery

PDF download Download Article
PDF download Download Article

Pottery is a subset under the broader category of ceramics, and it's commonly used for everyday life, like eating and drinking. Pottery and ceramics in general can often be repaired using the same methods. So, the next time your favorite piece of pottery gets cracked or chipped, don't even consider throwing it out! Instead, try fixing it first. A 2-part epoxy adhesive can work wonders and repair broken pieces of pottery so that they look almost-new once again, and you can fill chips with an epoxy filler. [1]

Method 1
Method 1 of 2:

Using a 2-Part Epoxy

PDF download Download Article
  1. This won't be necessary for all repairs, but it can be really helpful for items that need to be fixed while held at an angle. Nestle the broken pottery piece into the sand so that the cracked section is facing up. This enables you to use both hands to make the repairs. [2]
    • If you don't have sand, you can also use rice to the same effect.
    • You could also use a large pot, a shallow serving dish, or something similar to hold the sand as long as it's deep enough to fully support the pottery.
  2. Sand the edges of the chipped area to smooth ragged edges. Use fine sandpaper on both the edges of the broken-off piece and the main piece of pottery. Use a back and forth motion with light pressure until the edges are smooth. [3]
    • If you're fixing a crack rather than a full break, you don't need to worry about sanding the piece at this point.
    Advertisement
  3. Wipe down the edges both from the main piece of pottery and from the broken-off piece. Let them air dry completely afterwards before moving on to the next step. [4]
    • This will ultimately help the adhesive do its job better as there won't be any dirt in the way.
  4. [5] Squeeze the epoxy onto a non-porous disposable surface, like a thin sheet of plastic, and use a wooden or plastic stick to mix together the 2 components as quickly as possible. It'll start to harden after 3 to 4 minutes, so you need to work fast.
    • Some 2-part epoxies come in a container with a syringe that will distribute both parts equally for you. If yours doesn't come with that, disperse each part of the epoxy in lines so that you can gauge by eye that the 2 components are equal.
    • Avoid using superglue for repairs. Superglue is very thin, and while it's strong, it won't protect your pottery from future breakages along the same cracks as well as epoxy will.

    Warning: If your piece of pottery is used with food, like a mug or a soup bowl, look for a food-safe adhesive or one that is silicone based. [6] There are both epoxies and other types of adhesives that are FDA-approved for food safety.

  5. Use the wooden or plastic stick to line the edges of the piece of pottery as well as the cracked piece with epoxy. Don't worry about using too much or if it is going over the edges—you'll be able to remove that excess epoxy later on.
    • If you're working with a crack rather than a break, use a toothpick to apply the epoxy to the crack. Push the epoxy into the crack as far as you can, then squeeze the piece together so the crack adheres back together.

    Tip: Hold small pieces of broken pottery with tweezers while you apply the epoxy to keep your fingers clean.

  6. It's totally okay if epoxy squeezes out around the edges. Get it in line as perfectly as you can and hold it in place for about 30 seconds or as long as the epoxy directions instruct.
    • If you're worried about getting the adhesive onto your hands, wear a pair of rubber gloves while you work.
    • If there is more than one piece to reattach, do one at a time rather than trying to do them all at once.
    • If the pieces aren't staying together well because of the position of the pottery, use a small piece of modeling clay to pinch the edges together. It'll come right off once the piece has fully dried.
  7. You can use a razor blade or a sharp, flat-edged knife. Simply run the blade along the surface of the piece of pottery and slice off any sections of raised dried epoxy.
    • Most fast-acting epoxies take about 20 minutes to fully set, but always follow the instructions for whatever brand you're using.
  8. Take 220-grit sandpaper and rub it very lightly over the sealed cracks on your piece of pottery. This will just finish the process so that there are absolutely no bumps or imperfections on your piece. [7]
    • To double-check the surface run your thumb over the sealed cracks. The sensitivity in your finger should allow you to easily feel if there are more sections that need to be sanded.
  9. You may not want to or need to do this since the epoxy dries clear, but if you think the cracks are too visible, use acrylic paint to cover those lines. [8] Mix your colors carefully to get as close a match to the original color as possible. [9]
    • You can also spray an acrylic gloss over the repaired area if the rest of the piece is shiny and you want the crack lines to be less noticeable.
    10. Advertisement
Method 2
Method 2 of 2:

Filling in Chipped Areas

PDF download Download Article
  1. Use denatured alcohol or 91% alcohol and a cotton ball. Let the item air dry completely before moving on to the next step. [10]
    • Don't skip this part even if you can't see any visible grime in the chip. There could be built up oils or residue that you can't see but that could get in the way of the epoxy adhering to the pottery.
  2. [11] You can buy epoxy filler online or at a home improvement store. Most brands come with 2 components: the filler and a hardener that has to be mixed with the filler once it's ready to be used. [12]
    • You could also use a polyester filler to the same effect. Polyester filler tends to be a little less expensive than epoxy filler, but the epoxy filler is usually a little easier to handle and takes less time to dry.
  3. Squeeze out enough filler to completely fill the chip you're repairing. Read the directions to determine how much hardener you need to mix in with the filler so that it'll work properly. [13]
    • Work quickly—the hardener will only allow you 4 to 5 minutes to work with the filler before it gets too stiff to be pliable still.
    • For the best results, work in a room that is 75 °F (24 °C) or warmer.
  4. Use a wooden or plastic stick to fill the entire chipped area with the filler. If needed, use a toothpick to poke it into small, hard to reach areas. It's okay if the filler isn't even with the rest of the pottery—you'll deal with that part later.
    • Even though the filler might resemble putty, don't use your hands to put it in place. Continue using your wooden or plastic stick.
  5. Epoxy filler can take anywhere from 2 hours to 2 days to harden, so make sure to check the manufacturer's instructions for that information. Use a razor or a straight-edged knife to shave off larger chunks of filler that is raised up over the surface of the piece of pottery.
    • Don't worry about getting the edges to look perfect with the razor. You'll use sandpaper later on to smooth things out.
  6. Take a piece of 220-grit sandpaper and gently rub it back and forth over the repaired area. Keep working at it until the surface is once again completely smooth.
    • Once you're done sanding, give the piece another wipe down with alcohol to get rid of any sandpaper and filler residue.

    Tip: For sections that have corners or edges, wrap sandpaper around a dowel to give yourself a little more control over the sanding process.

  7. Because the filler is most likely brown or white, you'll probably want to paint it so it doesn't stick out as much from the rest of the piece. Take your time matching the color of the paint to the color of the piece of pottery. [14]
  8. This spray will add a layer of gloss to the repaired area, which will make it stand out from the rest of the piece less. If possible, use the spray outside or in a well-ventilated area so that you aren't bothered by the fumes. Let the gloss completely dry before you use or display the pottery piece again.
    • It generally takes acrylic spray about 12 to 24 hours to completely dry. Test it by patting it with your thumb—if it still feels tacky it needs more time.
    9. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the best glue for pottery repair?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    Two-part epoxies are one of the best options out there! If the item is a decorative ceramic piece, you could also use a super glue to repair it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    How can I fix a crack in pottery?
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College.
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Expert Answer
    There are different ways to fix a crack in pottery. You can make the crack bigger and then fill it with a mixture of the same clay and some particles of fire clay. Buy magic water to fix cracks in sculptures or use vinegar to repair them.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
  • Question
    What are the different types of clay?
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College.
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Expert Answer
    There are different types of clay depending on their firing temperature. Earthenware is a low-temperature clay, and mid-range clays are known as stoneware. Porcelain is a high fire range clay.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If your broken pottery is beyond repair, consider repurposing it into a piece of art. You could embed the pieces in wet concrete to make stepping stones for a garden, or you could even sand the pieces down and make jewelry out of them.
        Thanks
        Helpful 0 Not Helpful 0
      • Many types of ceramics can be fixed using these same methods for pottery, but items made of terra cotta, stone, or plaster will require a different method altogether.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Using a 2-Part Epoxy

      • Large bucket
      • Sand
      • 2-part epoxy adhesive
      • Plastic or wooden stirrer for epoxy
      • Non-porous surface to mix epoxy
      • Tweezers (optional)
      • Razor or flat-edged knife
      • Toothpick
      • 220-grit sandpaper
      • Acrylic paint
      • Paintbrushes
      • Denatured or 91% alcohol
      • Cotton balls

      Filling in Chipped Areas

      • 2-part epoxy filler
      • Denatured or 91% alcohol
      • Cotton balls
      • Razor or flat-edged knife
      • 220-grit sandpaper
      • Acrylic paint
      • Paintbrushes
      • Clear spray acrylic

      You Might Also Like

      How to
      Make a Silicone Mold
      17 of the Most Valuable Pottery and Porcelain Marks
      How to
      Bake Polymer Clay in a Conventional or Toaster Oven
      How to
      Harden Modeling Clay
      How to
      Make a Clay Person
      How to
      Color Air Dry Clay
      How to
      Soften Polymer Clay
      How to
      Revive Dry Clay
      How to
      Make DIY Clay Dolls at Home
      How to
      Drill a Clay Pot
      How to
      Dry Non‐Hardening Modeling Clay
      How to
      Make a Clay Volcano
      How to
      Make a Clay Pot
      How to
      Slab Clay
      Advertisement

      References

      1. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      2. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/How-to-fix-broken-pottery-china-ceramic-lesson-1.htm
      3. ↑ https://youtu.be/oMyx4PqBLJQ?t=98
      4. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/How-to-fix-broken-pottery-china-ceramic-lesson-1.htm
      5. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      6. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      7. ↑ https://youtu.be/Rg4q0g8zXi8?t=132
      8. ↑ Natasha Dikareva, MFA. Ceramics & Sculpting Instructor. Expert Interview. 5 May 2020.
      9. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/painting-coloring-repaired-ceramic-sculpture-tutorial.htm
      1. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/How-to-repair-chipped-pottery-china-ceramic-step-by-step.htm
      2. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      3. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/How-to-repair-chipped-pottery-china-ceramic-step-by-step.htm
      4. ↑ https://youtu.be/Rg4q0g8zXi8?t=95
      5. ↑ http://www.lakesidepottery.com/Pages/Pottery-tips/painting-coloring-repaired-ceramic-sculpture-tutorial.htm

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 153,221 times.

      Did this article help you?

      Advertisement