How to Mix Gas for a Weed Wacker

PDF download Download Article
PDF download Download Article

Weed wackers are a handy tool for all homeowners to have, so naturally you want to keep yours in good working order. Like other small-engine power tools, weed wackers require a mixture of engine oil and gasoline to run properly. Making the mixture is simple once you know the correct proportion. After that, just pour in the right amounts of oil and gas into a jerry can, mix it up, then start your machine.

Method 1
Method 1 of 2:

Finding the Correct Measurements and Materials

PDF download Download Article
  1. This ratio is how much oil you need to mix into the gas for ideal performance. A 50:1 ratio, for example, means that you need 50 parts of gas for 1 part of oil. Different weed wacker models might have different suggested ratios, so always confirm the recommended ratio to keep your engine in good working order. [1]
    • The most common mixtures for small engines are 32:1, 40:1, 50:1, or 100:1. Currently, the most common mixtures are 50:1 and 40:1.
    • If you don’t have the user manual, try searching online for your weed wacker model and recommended oil mixture, or contact the manufacturer.
    • When you learn the correct oil mixture, write it down somewhere or on the side of the machine so you don’t forget.
  2. A jerry can is a container designed to hold gasoline. Since weed wackers have small gas tanks, a 1 US gal (3.8 L) can should be plenty. [2]
    • 1 US gal (3.8 L) is also a good amount because in the US, mixing oil usually comes in small bottles measured to a 50:1 mixture for a gallon of gas. This way, you can just pour in the whole bottle, unless you're using a different ratio.
    • Only mix gas in a container meant to hold gasoline.
    • If you’re using an old container, clean off the area around the lid so no dirt or grime gets into your gasoline.
    Advertisement
  3. There are 128 fl. oz. in a gallon, so that means there are 128 fl. oz. in your jerry can. Converting to ounces makes the measurement much easier because oil cans come in ounces rather than gallons. [3]
    • If you have a jerry can that holds more than 1 gallon (3.8 L), just multiply the number of gallons by 128. A 3-gallon can, for instance, has 384 fl. oz.
  4. If you need 1 part of oil for every 50 parts of gas, then divide the total amount of gasoline by 50.The result is 2.6, meaning that you need 2.6 fl. oz. of oil for a gallon of gas. [4]
    • This also works with other mixtures, like 40:1. Just divide by 40 instead of 50. 128 fl. oz. is 3.2 fl. oz. if you divide it by 40. This means you need 3.2 fl. oz. of oil per gallon of gas for a 40:1 mixture.
    • Use the same calculation for milliliters. If you have a 5-liter can, this is 5,000 ml. Divide 5,000 by 50 to get 100 ml of oil.
    5. Advertisement
Method 2
Method 2 of 2:

Mixing the Gas

PDF download Download Article
  1. Get a bottle of mixing oil from the hardware store or auto parts store. Shake the oil first. Then pour the oil into a measuring cup to make sure you use the right amount. Pour the oil directly into the can. [5]
    • This calculation is for 1 gallon (3.8 L) of gas at a 50:1 mixture, so adjust that if you use a different amount of gas or different mixture.
    • In the US, mixing oil usually comes in small bottles measured to a 50:1 mixture for a gallon of gas. In this case, pour a whole bottle of oil in for every gallon of the mixture for easy measuring.
    • Some bottles come in different concentrations as well. If you need a 40:1 mixture, look for a 40:1 oil bottle. This makes measuring much easier.
  2. Medium gasoline, with an octane rating of 89, is the minimum type for keeping your weed wacker in good working order. Pour the gas directly into the can up to the fill line so your proportions are correct. [6]
    • Don’t overfill the can. If you go over the fill line, your oil concentration will be too low.
    • You could also use premium-level gasoline to protect your engine better. Don’t go below an 89-octane rating, though, or you could damage the engine over time.
  3. Seal the container first. Then pick it up and swish it around so the oil and gas mix well together. [7]
    • Shaking in a circular motion is best. Shaking up and down could spill the gas out.
  4. Once your gas is all mixed up, pour it directly into the weed wacker gas tank. Start the machine up and clean out your yard. [8]
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you use ethanol free gas in a Weed Eater?
    Grant Wallace
    Landscaper
    Grant Wallace is a Landscaper and Owner of Grantlanta Lawn in Atlanta, Georgia. With over seven years of experience, he specializes in lawn maintenance and landscape installation. In 2012, he earned his BA from the University of West Georgia. Grant has been profiled in Shoutout Atlanta, Canvas Rebel, and Voyage ATL.
    Grant Wallace
    Landscaper
    Expert Answer
    For sure! Although it is a bit more expensive, it's a really great option!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      • Jerry can
      • Mixing oil
      • Medium-octane gasoline

      Tips

      • Don’t store gas mixed with oil for more than 3 months, or it could start to degrade. Only mix as much as you’ll use in a short time. [9]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never mix or store gasoline in a container that wasn’t designed for it. This is a fire hazard and the containers could also leak.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Paint on Plastic
      How to
      Clean a USB C Charging Port
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=VKyeYt2og2I
      2. ↑ https://youtu.be/VKyeYt2og2I?t=90
      3. ↑ https://www.youtube.com/watch?v=VKyeYt2og2I
      4. ↑ https://www.thedailygardener.com/weed-eater-oil-to-gas-ratio
      5. ↑ https://youtu.be/VKyeYt2og2I?t=401
      6. ↑ https://www.thedailygardener.com/weed-eater-oil-to-gas-ratio
      7. ↑ https://www.thedailygardener.com/weed-eater-oil-to-gas-ratio
      8. ↑ https://www.thedailygardener.com/weed-eater-oil-to-gas-ratio
      9. ↑ https://www.iflscience.com/gasoline-has-a-shelf-life-and-its-way-shorter-than-you-think-68043

      About This Article

      Thanks to all authors for creating a page that has been read 89,221 times.

      Did this article help you?

      Advertisement