How to Mix Mortar

PDF download Download Article
PDF download Download Article

Whatever the size of your bricklaying project, knowing how to mix your own mortar will ultimately save you a lot of time and money. After all, it's just a combination of cement, lime, sand, and water—easy enough to do yourself. Even better, you can buy pre-made mortar mixes and just add water so you don't have to worry about mixing the dry ingredients. Read on to learn everything you need to know to mix your own mortar, including how to make your own from scratch and how you can customize it with additives.

Ratios For Mixing Mortar

  • Mortar mix type M: 3 parts Portland cement, 1 part lime, 12 parts sand
  • Mortar mix type S: 2 parts Portland cement, 1 part lime, 9 parts sand
  • Mortar mix type N: 1 part Portland cement, 1 part lime, 6 parts sand
  • Mortar mix type O: 1 part Portland cement, 2 parts lime, 9 parts sand
Method 1
Method 1 of 3:

Making Mortar from Scratch

PDF download Download Article
  1. All mortar is made of various proportions of Portland cement, lime, and sand. Portland cement is simply a type of cement made from limestone and clay—it's not a brand. [1] The ratios are always measured in parts per volume and always list the parts of Portland cement first, followed by the parts of lime, then the parts of sand. Each type of mortar uses different proportions: [2]
    • M: 3 parts Portland cement, 1 part lime, 12 parts sand
    • S: 2 parts Portland cement, 1 part lime, 9 parts sand
    • N: 1 part Portland cement, 1 part lime, 6 parts sand
    • O: 1 part Portland cement, 2 parts lime, 9 parts sand
  2. Wear waterproof work gloves, long sleeves, a respirator mask, and safety goggles. Cement can cause chemical burns on any part of your body it comes in contact with, including your skin and eyes. If the dust is inhaled or swallowed, it can also damage your throat and lungs. [3]
    • When you pour or stir the dry ingredients, dust inevitably rises up. It's easy to inhale if you're not wearing a mask.
    Advertisement
  3. Use a shovel to mix your dry ingredients together until the mix looks fairly uniform. You want to make sure the ingredients are evenly distributed so that your mortar has consistent strength. [4]
    • If you're using a mechanical mixer, pour about half of the water you plan to use into the mixer first. Then, add half the sand and any lime, followed by the concrete and the rest of the sand.
  4. Spray the container with water first so the dry ingredients won't stick to the bottom. For a small batch, you might use a bucket. If you're making a larger batch, you'll probably want a wheelbarrow so you'll have room to mix it. The wheelbarrow also makes it easy to take the mortar to the place where you'll be using it. [5]
    • Pour slowly so the ingredients won't cloud up as much. This is not only a hazard but causes you to lose part of your batch.
    • If there's wind, turn so the wind is blowing away from you as you pour. You don't want the dust blowing directly onto you, even when you're wearing safety gear.
  5. Pour water into the center of your dry ingredients, then fold them slowly into the water, spreading the water throughout the mix. Continue this process until your mortar is the consistency of toothpaste or thick peanut butter.
    • The amount of water you'll need can vary greatly depending on humidity, air temperature, and other factors. Just add it slowly and pay attention to the consistency of the mortar as you go.
  6. Mortar will set after 2 hours or so, at which point it becomes unusable. You can add a little drizzle of water to the mortar as you go to keep it workable, but after it sets, you have to throw it out. Adding any water at this point would make it too weak.
    • The outside temperature affects how quickly your mortar will set. If it's hot, your mortar will set much faster. Make smaller batches if you're working in higher temperatures. [6]
    7. Advertisement
Method 2
Method 2 of 3:

Using a Mortar Mix

PDF download Download Article
  1. Different brands might have slightly different mixes of ingredients, so read the label carefully. [7] There are 4 basic types of mortar: M, S, N, and O. Each type is best used for different projects—just pick the type that best suits what you're trying to do. [8]
    • M: used for below-grade (at or below ground-level) load-bearing work, as well as for chimneys and brick manholes
    • S: used for below-grade work including foundation walls, brick manholes, retaining walls, sewers, walkways, patios, and pavement
    • N: a general-purpose mortar mix that can be used for both interior and exterior above-grade (above ground-level) work
    • O: also referred to as "pointing" mortar, used for above-grade, non-load-bearing, and decorative work
  2. Spraying your containers down with water keeps your dry mix from sticking to the container. This ensures that your mortar is consistent throughout. [9]
    • Pre-wetting your containers and tools also makes clean-up a little easier. While you'll still have some mortar stick, it won't be as bad if you pre-wet everything.
  3. Because concrete can cause chemical burns, it's important to protect yourself. Mixing it stirs up clouds of dust that can cause serious lung damage if inhaled. It can also burn your eyes. [10]
    • Always gear up before you even open a bag of mortar mix. Just the act of opening the bag can cause dust to escape.
  4. Make sure the wind is blowing away from you when you dump the bag of mix to keep the dust from blowing directly towards you. Pour it out slowly so it won't cloud up too much.
    • Pouring a puddle of water in the bottom of the container before you add the dry ingredients also helps decrease clouding.
  5. Pour the water into the center of the container and fold the mortar from the outside in using a trowel or shovel. Make sure you dig all the way to the bottom to fold the mortar toward the center.
    • Mix well so that the mortar has a consistent texture. You don't want dry spots or puddles of water anywhere.
    • You can also think of the proper consistency as being something like thick peanut butter.
    • The amount of water used can vary drastically depending upon the weather, how wet the sand is, and the variety of mix you're using, so add it slowly. [11]
  6. Masons typically transfer the mortar to a flat piece of wood known as a "mortarboard." On the mortarboard, you can work the mortar and make sure the consistency is correct. Scoop some mortar on your trowel, then flip it to 90 degrees. If the mortar stays on the trowel, it's good to go. [12]
    • Your mortar will set more quickly if it's hot outside. Compensate for this by making smaller batches so you won't waste as much. [13]
    7. Advertisement
Method 3
Method 3 of 3:

Mixing in Masonry Additives

PDF download Download Article
  1. If you're making your own mortar from scratch, you can use a different color of sand to change the color of your mortar. But if you're using a pre-made mortar mix, change the color with pigments, powdered additives available wherever masonry products are sold. Dissolve the pigment you want in the water you plan to use to mix your mortar to ensure the color is consistent throughout the batch.
    • You can also add pigment after you've mixed your mortar. This gives you a little more control over the specific shade, especially if you're using something you've never used before. However, it can be more difficult to keep it consistent from batch to batch.
    • Add the exact same amount of pigment using the same process for all subsequent batches so all of your mortar is the same color throughout the project.
  2. It's best to mix mortar in mild temperatures with relatively low humidity—but you can't control the weather. If you're going to be working in hot or cold weather, admixtures can help keep your mortar workable so you can get the job done. [14]
    • Accelerators increase the mortar's workability in cold temperatures. Use hot water to mix mortar with an accelerator added.
    • In hot weather, you can add a retarder to slow the rate of hydration and keep the mortar workable for a longer period of time. Use cool water to mix mortar with a retarder added. Some masons will even add ice to the water to lower the temperature further.
    • It's still best to mix smaller batches in hot weather because mortar can "flash set" and become unusable quickly—even with a retarder.
  3. Air-entrained mortar contains tiny air bubbles that relieve internal pressure on the mortar, making it stronger. In cold weather, water can expand into the air pockets when it freezes so it won't crack the mortar. [15]
    • If you're making your mortar from scratch, you can buy air-entrained Portland cement to use. Some pre-made mixes also use air-entrained Portland cement—just read the bag.
  4. Efflorescence happens when evaporating water in your masonry leaves salt behind, resulting in a white powder on the surface of your bricks. The water necessary to cause efflorescence is typically introduced by the mortar. Many manufacturers have created admixtures that claim to prevent efflorescence. [16]
    • The ingredients used in these admixtures are protected as trade secrets, so there aren't general instructions for how to use these products.
    • If you're mixing one of these products into your mortar, follow the manufacturer's instructions precisely.
  5. Water-repellant admixtures are common in many pre-mixes. These additives protect your brickwork from moisture by keeping water from penetrating the mortar. While they're more frequently used in concrete walls, they can also be helpful in mortar mixes. [17]
    • Since efflorescence is caused by evaporating water, water repellant admixtures help with that too.
  6. Most additives are in powder form. They'll spread evenly and consistently throughout your mortar if you dissolve them in water first. Use a small amount of water and pour it in first. [18]
    • Many pre-made mixes have various additives already in them. Check the ingredients in your mix carefully to make sure you don't add something separately that's already in the mix—that could weaken your mortar or make it unusable.
    • With pre-made mixes, you still have to follow the same masonry practices that you would if you were mixing in an additive yourself. These requirements will be listed on the bag, so read them and follow them carefully.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What consistency should mortar mix be?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    A good mortar mix should have the same consistency as peanut butter, but that can change depending on the brand, as different manufacturers have different setting instructions.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Can you mix mortar wrong?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    Yes, you can! The process is rather simple, but most people ignore the instructions and estimate the proportions. Don't fall for that trap. Just follow the instructions on the bag and you should have no problems.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    Does a mix of dry mortar and cement work?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Dry mortar is itself a mix of Portland cement, lime, and sand. Adding more cement to that would change the properties of the final mortar. There's no need to add cement to a dry mortar mix—just buy the type of mix that you need for your project.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • The water you use doesn't necessarily have to be drinkable, but it does have to be potable —clean and free of dissolved organic materials and other acids. Drinkable water is considered potable. [19]
        Thanks
        Helpful 0 Not Helpful 0
      • If you have a larger project, you might want to rent a mechanical mixer from your local hardware store—it'll save you a lot of time and effort. [20]
        Thanks
        Helpful 0 Not Helpful 0
      • Clean your tools and containers when you're done for the day to prevent the buildup of dried mortar.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Cement dust can harm your eyes, lungs, and skin. Always wear safety goggles and a respirator mask when mixing mortar. Wear a long-sleeve shirt and waterproof work gloves to protect your skin. [21]
        Thanks
        Helpful 0 Not Helpful 0
      • Chemical additives are not recommended for historic masonry projects because they can damage the original brickwork. [22]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Build Your Own Home (US)
      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make a Brick Kiln
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Drill Through Granite
      How to
      Remove Efflorescence from Brick
      Advertisement

      References

      1. ↑ https://www.sciencedirect.com/topics/engineering/portland-cement
      2. ↑ http://jeffersonmatters.org/wp-content/uploads/2012/09/Masonry-mortar-mixes.pdf
      3. ↑ https://www.poison.org/articles/cement
      4. ↑ https://ncma.org/resource/concrete-masonry-construction/
      5. ↑ https://ncma.org/resource/concrete-masonry-construction/
      6. ↑ https://masoncontractors.org/2007/04/26/getting-the-most-from-admixtures/#newsletter
      7. ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 17 February 2022.
      8. ↑ http://jeffersonmatters.org/wp-content/uploads/2012/09/Masonry-mortar-mixes.pdf
      9. ↑ https://ncma.org/resource/concrete-masonry-construction/
      1. ↑ https://www.poison.org/articles/cement
      2. ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 17 February 2022.
      3. ↑ https://ncma.org/resource/concrete-masonry-construction/
      4. ↑ https://masoncontractors.org/2007/04/26/getting-the-most-from-admixtures/#newsletter
      5. ↑ https://masoncontractors.org/2007/04/26/getting-the-most-from-admixtures/#newsletter
      6. ↑ https://www.cement.org/cement-concrete/working-with-concrete/air-entrained-concrete
      7. ↑ https://www.masonryinstitute.org/pdf/612.pdf
      8. ↑ https://masoncontractors.org/2007/04/26/getting-the-most-from-admixtures/#newsletter
      9. ↑ https://masoncontractors.org/2007/04/26/getting-the-most-from-admixtures/#newsletter
      10. ↑ https://www.nps.gov/tps/how-to-preserve/briefs/2-repoint-mortar-joints.htm
      11. ↑ https://ncma.org/resource/concrete-masonry-construction/
      12. ↑ https://www.poison.org/articles/cement
      13. ↑ https://www.nps.gov/tps/how-to-preserve/briefs/2-repoint-mortar-joints.htm

      About This Article

      Article Summary X

      To mix mortar by hand, first make a pile of sand and put your cement bag next to it. Then, cut open the side of the bag, roll it over onto the sand, and empty the cement onto the pile. Next, use a small shovel to mix the sand and cement until they’re evenly distributed. You can then use your shovel to create a crater in the pile. Pour water into the crater, and use your shovel to mix your mortar by repeatedly taking dry mix from the edges and putting it into the center until it’s all wet and well-mixed. Finally, let your mortar sit for 3-6 minutes before using it. To learn how to make your mortar using a mixer, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 646,136 times.

      Reader Success Stories

      • Davis Bigelow

        Mar 28, 2016

        "I've never heard of the wrist snap method of checking the consistency of the mud. Thanks. When I mix mortar, I ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement