How to Needle Punch

Needle punching is a fun way to create textured designs on fabric. It’s easier to learn than embroidery, and you can needle punch any design you like. Before you start needle punching, you’ll need to sketch your design on your fabric. Next, thread your needle puncher. Then you’ll be all set to stitch your design with the needle puncher. When you’ve completed the pattern, you can mount your design in the embroidery hoop or turn it into a patch.

Threading the Punch Needle

Push a long threader through the pointed end of the punch needle so it pops out of the bottom. Thread your yarn through the threader, then pull the threader back out of the needle so the yarn comes out the other side. Push the threader through the eye of the needle and pull the yarn through the hole to finish.

Part 1
Part 1 of 5:

Transferring Your Design onto Fabric

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/0\/0c\/Needle-Punch-Step-1-Version-2.jpg\/v4-460px-Needle-Punch-Step-1-Version-2.jpg","bigUrl":"\/images\/thumb\/0\/0c\/Needle-Punch-Step-1-Version-2.jpg\/aid1383614-v4-728px-Needle-Punch-Step-1-Version-2.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    When you are just starting out, you may want to practice doing a small, simple design. Look online for inspiration or sketch your own design on a piece of paper.
    • Designs with larger blocks of color will be easier than intricate fine lines.
    • To make your life easier, consider using a symmetrical design, so it doesn’t matter which side is the front or back.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/3\/36\/Needle-Punch-Step-2-Version-2.jpg\/v4-460px-Needle-Punch-Step-2-Version-2.jpg","bigUrl":"\/images\/thumb\/3\/36\/Needle-Punch-Step-2-Version-2.jpg\/aid1383614-v4-728px-Needle-Punch-Step-2-Version-2.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Get enough fabric to easily fit your design plus a few extra inches around the sides so that you can attach the embroidery hoop. Weavers cloth is a kind of woven cotton and polyester blend that will hold your needle punch stitches in place. If you are needle punching a rug, you will need a heavier weight weavers cloth than if you are making a pillow. You can buy weavers cloth online or at a craft store. [1]
    • As an alternative, you can also use denim or a poly-cotton twill, but they won’t work as well as weavers cloth.
    • Monk's cloth is another good option for this type of project. [2]
    • If you use a cotton fabric like muslin, the fibers might tear when you try to punch needle. [3]
    Advertisement
  3. Watermark wikiHow to Needle Punch
    You can use a fabric pencil, a normal pencil, or even a marker, since the marks will be covered with stitches anyways. When you punch needle, you will create a side with loops and a side with flat stitches. The loops will be on the back as you create the design, but most people want them on the front for the finished design, so you have to draw your design in reverse. That way, when you flip over the pattern, it will be in the right direction. [4]
    • If you prefer to have the loops on the back of your fabric, you can draw your design normally, not in reverse.
    • If you chose a symmetrical design, it won’t matter whether you draw it in reverse or not.
  4. Watermark wikiHow to Needle Punch
    If you don’t want to draw your design by hand, you can transfer it onto your fabric with tracing paper. Put a sheet of tracing paper down on your fabric. Print out your picture, and put it face down on top of the tracing paper. Draw over all the lines in the drawing with a pencil, and the tracing paper will leave marks in the shape of your design on the fabric. [5]
    • If you want the loops to be on the back of your design, trace the printed image face up instead of face down.
  5. Watermark wikiHow to Needle Punch
    Embroidery hoops are made off 2 hoops, a smaller inner hoop and a larger outer hoop. Loosen the screw on the outside of the large hoop until you can easily pop it off the small hoop. Lay the fabric over the small hoop so that your design is centered in the hoop. [6]
  6. Watermark wikiHow to Needle Punch
    Place the larger hoop over the smaller hoop. Adjust the fabric until it is smooth and tight across the hoop. Turn the screw on the outer hoop so that it is tight around the inner hoop. [7]
    • You may have to loosen the screw, adjust the fabric, and tighten the screw again a few times until the fabric is evenly taut across the hoop.
    7. Advertisement
Part 2
Part 2 of 5:

Threading the Punch Needle

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/14\/Needle-Punch-Step-7-Version-2.jpg\/v4-460px-Needle-Punch-Step-7-Version-2.jpg","bigUrl":"\/images\/thumb\/1\/14\/Needle-Punch-Step-7-Version-2.jpg\/aid1383614-v4-728px-Needle-Punch-Step-7-Version-2.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You get to decide what colors you use. For example, if you are making a tree, you might want brown, red, and a few kinds of green. Make sure to buy embroidery floss, not sewing thread. Embroidery floss is thread that is twisted so that it has 6 strands, so it is thicker than the thread you would use for sewing.
    • You can use cotton or wool embroidery floss.
  2. Watermark wikiHow to Needle Punch
    The metal threader is made of thin metal wires and it should come with the punch needle in the same package. Push the metal threader through the front of the punch needle, at the hollow tip of the needle. [8]
    • Push the threader all the way down so that the end sticks out the back of your punch needle.
  3. Watermark wikiHow to Needle Punch
    Push the end of your embroidery floss through the back of the metal threader. Leave 1 inch (2.5 cm) or more of tail, so that when you pull the threader through the needle punch, the floss won’t slip off. [9]
    • Remember to use the color of floss that you want to stitch first in your design.
  4. Watermark wikiHow to Needle Punch
    Pull the metal threader out through the front of the punch needle, so that it pulls the floss with it. Your floss should be coming out the front of your punch needle. Take the string off the back of the metal threader so that it is dangling freely. [10]
    • If the threader didn’t bring the floss with it, try again with a longer tail.
  5. Watermark wikiHow to Needle Punch
    The tip of your needle punch has a scooped out front, called the bevel, and a smooth back. The smooth back has a little hole it in, called an eye. Put your needle threader through this eye, so that the threader is sticking out into the beveled part of the tip. [11]
    • It might take you a few tries to get the metal threader through the small eye.
    • Working under a bright light should help if you’re struggling with this step.
  6. Watermark wikiHow to Needle Punch
    Put your floss back into the tip of the threader. Pull the threader out of the eye, so that it pulls the floss with it. Remove the floss from the threader. [12]
    • The floss will continue to unspool as you needle punch, so you don’t need to cut a specific length of floss at this stage.
    7. Advertisement
Part 3
Part 3 of 5:

Needle-Punching the Design

PDF download Download Article
  1. Watermark wikiHow to Needle Punch
    The higher the number, the longer the loop will be. Start with a setting in the middle. If you don’t like the loop after a few stitches, you can easily pull out the stitches and reset the length. [13]
    • You can also check the instructions that come with your specific punch needle to see what loop length they recommend.
    • Keep in mind that the longer loops you have, the more floss you will use, which can add up in cost if you do a lot of needle punching.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/f\/fd\/Needle-Punch-Step-14.jpg\/v4-460px-Needle-Punch-Step-14.jpg","bigUrl":"\/images\/thumb\/f\/fd\/Needle-Punch-Step-14.jpg\/aid1383614-v4-728px-Needle-Punch-Step-14.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Hold the punch needle like you would a pen or pencil, with the tip of the needle resting on your taut fabric. [14] The bevel, which is the scooped-out, open side of the needle, always needs to face the direction of your stitches. [15]
    • As you stitch, you’ll have to keep rotating the pen so that it faces the direction you’re stitching.
  3. Watermark wikiHow to Needle Punch
    Start with the outline first, then fill in the main elements from the inside out, going a row at a time. You can spiral in toward the inside or start at one end and fill in rows all the way until the other side. Keep your rows so close together that the floss touches. [16]
    • For an extra-clean look, punch the stitches in your row so that they line up with the middle of the stitches in the previous row. [17]
  4. Watermark wikiHow to Needle Punch
    Place the sharp end of the needle on the pattern, punch directly through the fabric so that the depth gauge touches the fabric. Flip your hoop over so that you can see the front side, and pull the tail of floss through. [18]
    • You’ll trim this tail at the end of the project, so don’t worry about it now.
    • Each stitch creates a loop of yarn that's held in place by the tension in the foundation fabric. [19]
  5. Watermark wikiHow to Needle Punch
    The needle head should always remain touching the fabric. Punch the needle through the fabric again until the needle is fully through and the plastic part of the pen touches the fabric. Then slowly remove the needle back towards you. [20]
    • It’s important to be gentle, because if you tug backwards on the floss, all your stitches will unravel.
    • If you're using monk's cloth, skip about 2-3 holes before making your next stitch. [21]
    EXPERT TIP

    Sarah Stearns

    DIY Specialist
    Sarah Stearns is a DIY Specialist, Artist, Maker, Blogger, and the Founder of SarahMaker.com. With over ten years of experience, she specializes in fun, approachable crafts like crocheting, making polymer clay jewelry, quilting, and creating Cricut projects. Her work has been featured in several publications, such as Scientific American, Good Housekeeping, Vox, and Apartment Therapy. Sarah holds a BA in Psychology from Vanderbilt University.
    Sarah Stearns
    DIY Specialist

    Try a stitch, skip, stitch pattern. To properly needle-punch a design, hold the needle tool just like you would hold a pencil. In a straight up-and-down motion, punch the sharp tip all the way through your monk's cloth foundation fabric. Pull the needle back up, skip over 2-3 holes, then repeat to create loops of yarn.

  6. Watermark wikiHow to Needle Punch
    Check that the loops are a consistent length and close enough together to form a solid color. You can always go back and fill in gaps in your stitches or make your rows closer together. [22]
    • If you don’t like how it looks, you can also pull out the stitches easily.
  7. Watermark wikiHow to Needle Punch
    Pull the needle punch out very carefully on your last stitch so that you don’t accidentally unravel your hard work. Trim the floss so that it is very close to the fabric. Trim the tail that’s sticking out from the beginning of your stitching, too. [23]
    • If you want, you can push the end of the floss out through the other side of the fabric using your metal threader, so that the floss pokes out onto the loop side.
  8. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/8e\/Needle-Punch-Step-20.jpg\/v4-460px-Needle-Punch-Step-20.jpg","bigUrl":"\/images\/thumb\/8\/8e\/Needle-Punch-Step-20.jpg\/aid1383614-v4-728px-Needle-Punch-Step-20.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Loosen the screw at the top of the large hoop until the hoop easily slides off. Then, just remove your fabric from the top of the small hoop.
    9. Advertisement
Part 4
Part 4 of 5:

Framing in the Hoop

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/d0\/Needle-Punch-Step-21.jpg\/v4-460px-Needle-Punch-Step-21.jpg","bigUrl":"\/images\/thumb\/d\/d0\/Needle-Punch-Step-21.jpg\/aid1383614-v4-728px-Needle-Punch-Step-21.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Framing your punch needle art right in the embroidery hoop is an easy way to frame your art. Then, you don’t have to go to the trouble of buying a frame and making sure the fabric is stretched tight enough.
    • If you don’t like the embroidery hoop you used for the needle punching, you could paint it or buy a prettier frame.
  2. Watermark wikiHow to Needle Punch
    You need a backing for your piece to protect your stitches from unraveling. One easy way to measure how big the felt should be is to stick it in the embroidery hoop, and then trim the edges until there is about 1 inch (2.5 cm) all the way around. [24]
    • Your measurements don’t have to be exact – you just want enough fabric to be able to glue down the back.
  3. Watermark wikiHow to Needle Punch
    Place the felt over the smaller embroidery hoop. Put the weavers cloth with your needle punch design on top of the felt. Then slide the larger hoop over both fabrics and tighten the screw. [25]
    • Adjust the fabrics until they are smooth and taut across the hoop.
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/7a\/Needle-Punch-Step-24.jpg\/v4-460px-Needle-Punch-Step-24.jpg","bigUrl":"\/images\/thumb\/7\/7a\/Needle-Punch-Step-24.jpg\/aid1383614-v4-728px-Needle-Punch-Step-24.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Hot glue the fabric down onto the back. Start by putting a line of glue around the inside edge of your hoop and carefully press the fabric against it. Fold the weavers cloth down onto the back and glue it down. [26]
    • Wait a few minutes for the glue to dry.
    • You can hang your mounted design on the wall or give it as a gift. [27]
    5. Advertisement
Part 5
Part 5 of 5:

Turning Your Design into a Patch

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/0\/08\/Needle-Punch-Step-25.jpg\/v4-460px-Needle-Punch-Step-25.jpg","bigUrl":"\/images\/thumb\/0\/08\/Needle-Punch-Step-25.jpg\/aid1383614-v4-728px-Needle-Punch-Step-25.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    If you have a small, cute design, turning it into a patch is a great way to show it off in your day-to-day life. Instead of leaving the design mounted in your house, turning it into a patch lets you wear it on your clothes or tote bags.
    • Patches can also make cool homemade gifts.
  2. Watermark wikiHow to Needle Punch
    Iron-on adhesive has 2 sides, a matte side and a sticky side. Set your design face down on an ironing board, and put the sticky side of the iron-on adhesive face down on the back of your design. Iron on the adhesive, moving the iron in gentle circles for about 10 seconds. [28]
    • Make sure to iron it down well around the edges.
    • The steam setting on your iron should be off.
  3. Watermark wikiHow to Needle Punch
    Using fabric scissors, cut out your design, trimming off all the excess fabric and adhesive. Cut close to the embroidery floss, but be careful not to cut so close that you’ll accidentally snip your stitches. [29]
    • Don’t use normal scissors, because they will be too dull to cut your fabric.
  4. Watermark wikiHow to Needle Punch
    Run fabric glue around the edge of your patch so that the edge don’t fray. If you don’t have fabric glue, you can use super glue instead. Wait for the glue to totally dry.
    • You can iron your patch on to a jacket, a tote bag, a pair of jeans, or whatever you want.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I needle punch directly onto wool fabric rather than the weaver's clot?
    Community Answer
    You can use any fabric, as long as you use a hoop and have the correct tension. The stitches require good pressure and tension.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 57
  • Question
    How many strands of thread should I use?
    Community Answer
    This depends on the desired design. Start with three strands, adding or subtracting if needed. You just have to make sure the fabric is hooped in nice and tight. Tap the fabric once it hoop. It should resonate like a drum.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 39
  • Question
    What thread do I use for this?
    Community Answer
    Embroidery floss is a good way to start. I often enjoy using regular sewing thread, because it's thin enough for little details.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 28
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Needle punch
      • Pattern
      • Weavers cloth
      • Embroidery hoop
      • Embroidery floss
      • Fabric scissors
      • Felt
      • Hot glue-gun
      • Iron
      • Fabric glue
      • Iron-on adhesive

      You Might Also Like

      How to
      Swap Out the Bits on Your Power Drill
      How to
      Drill Out a Lock
      How to
      Drill a Hole in the Wall
      10 Tips to Drill through Metal
      How to
      Drill Holes Through Glass
      How to
      Remove a Chuck from a Drill
      How to
      Drill a Clay Pot
      How to
      Remove a Broken Drill Bit
      How to
      Make a Pilot Hole
      How to
      Drill through Plexiglass Safely
      How to
      Dig Post Holes
      How to
      Drill at an Angle
      How to
      Drill Holes in Beads
      How to
      Be Safe When Using Power Drills and Equipment
      Advertisement

      References

      1. ↑ https://youtu.be/2tCRx-kpC0g?t=9
      2. ↑ Sarah Stearns. DIY Specialist. Expert Interview. 4 October 2021.
      3. ↑ https://youtu.be/VoFfesmP6j0?t=125
      4. ↑ https://youtu.be/S1UTSw5dRIc?t=29
      5. ↑ https://youtu.be/S1UTSw5dRIc?t=293
      6. ↑ https://youtu.be/Ys4s8e7Y4q0?t=101
      7. ↑ https://youtu.be/Ys4s8e7Y4q0?t=98
      8. ↑ https://youtu.be/Ys4s8e7Y4q0?t=58
      9. ↑ https://youtu.be/Ys4s8e7Y4q0?t=62
      1. ↑ https://youtu.be/3LOLTYyXFYg?t=71
      2. ↑ https://youtu.be/VoFfesmP6j0?t=68
      3. ↑ https://youtu.be/VoFfesmP6j0?t=92
      4. ↑ https://youtu.be/hh5gTT8dByY?t=109
      5. ↑ Sarah Stearns. DIY Specialist. Expert Interview. 4 October 2021.
      6. ↑ https://youtu.be/Ys4s8e7Y4q0?t=197
      7. ↑ https://youtu.be/xqHdO8zhy_k?t=216
      8. ↑ https://youtu.be/hh5gTT8dByY?t=500
      9. ↑ https://youtu.be/xqHdO8zhy_k?t=192
      10. ↑ Sarah Stearns. DIY Specialist. Expert Interview. 4 October 2021.
      11. ↑ https://youtu.be/d487ymp2DzQ?t=101
      12. ↑ Sarah Stearns. DIY Specialist. Expert Interview. 4 October 2021.
      13. ↑ https://youtu.be/xqHdO8zhy_k?t=255
      14. ↑ https://youtu.be/hh5gTT8dByY?t=551
      15. ↑ https://youtu.be/xqHdO8zhy_k?t=340
      16. ↑ https://youtu.be/xqHdO8zhy_k?t=351
      17. ↑ https://youtu.be/xqHdO8zhy_k?t=357
      18. ↑ https://youtu.be/d487ymp2DzQ?t=166
      19. ↑ https://youtu.be/S1UTSw5dRIc?t=157
      20. ↑ https://youtu.be/S1UTSw5dRIc?t=268

      About This Article

      Article Summary X

      To needle punch, start by transferring or drawing your design onto the fabric. Next, lock the fabric into the embroidery hoop and thread the punch needle. Then, hold the needle like you would a pencil and punch the outline of your pattern, making sure to go all the way through so that the depth gauge touches the fabric. Afterwards, fill in the inner sections 1 row at a time, punching from the inside out. Once all the sections are filled, carefully pull the needle out of the fabric and cut off the thread with a pair of scissors. To learn more, including how to prepare your fabric before putting it into the embroidery hoop, scroll down.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 415,612 times.

      Reader Success Stories

      • Beverly Dewitt

        Oct 11, 2017

        "I tried using a pre-stamped table runner kit, but the fabric was pretty thin. The punch tore holes in it, so I used ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement