Download Article
Download Article
Citric acid (C 6 H 8 O 7 ) is a weak organic acid present in oranges, lemons, limes and other citrus fruits. It is also commonly found in the lab and/or kitchen. You can use this acid in your cooking and cleaning, or to carry out experiments in the lab. Sometimes, you will need to dilute and neutralize citric acid (e.g., before disposing of it in lab). When this happens, you will need to understand and follow safe procedures for diluting the citric acid and neutralizing the solution.
Steps
-
Fill a container with water. Diluting a substance simply means to make it less concentrated. In this instance, you will be increasing the amount of water in the solution, thus diluting the acid. The first step is to have your water ready to receive the acid. [1] X Research source
- Do not pour the water into the acid. Put the water in a separate container.
-
Pour the acid into the water. Once you have water ready for dilution, you can slowly pour the citric acid into the water. If you have a large volume of citric acid, pour a little and then stir the solution before pouring more. This will help disperse the heat that is generated when diluting the acid. [2] X Research source
- Never pour water into acid. The heat will not be well dispersed, and it can result in concentrated acid vaporizing or splashing onto you.
- Wear gloves and goggles when diluting acid.
Advertisement -
Monitor the pH of the solution. The pH of the dilute acid solution will be higher than that of the concentrated acid solution. It should be noted that the pH of your dilute solution will never raise above 7.0 because that is the pH of the water. The closer you can bring the pH to 7.0 (neutral), the safer it will be to neutralize the acid with a base. [3] X Research source
Advertisement
-
Choose a base. Bases are substances with a high pH. Like acids, bases are corrosive. However, when acids and bases contact each other, they neutralize each other and the resulting mixture is less corrosive. You can use a strong base like NaOH (sodium hydroxide) to neutralize citric acid. If you do not have access to NaOH, something like sodium bicarbonate (baking soda) will also neutralize citric acid well.
-
Dilute the base. Dilute your base the same way that you diluted the citric acid. Get a container of water and slowly mix in the base. Again, the closer you bring the pH to 7.0, the safer the reaction will be when you use it to neutralize the citric acid solution. [4] X Research source
- Note that 7.0 is as low as you can get when diluting a base in water. This is because the pH of the water is 7.0, and thus adding more water will not make the pH go lower.
- Wear gloves and goggles when diluting bases.
-
Pour the acid solution into the base. To neutralize the citric acid solution, pour it slowly into the basic solution. Be prepared for the reaction to fizz and get hot. The reaction is also likely to emit fumes. Avoid getting any acid or base on your skin, and do not inhale any fumes produced. Just continue adding the acid slowly and stirring when needed. [5] X Research source
- The fizz is caused by the formation of carbon dioxide gas bubbles during the reaction.
- Use a glass stir rod to stir the reaction.
- Wear gloves and goggles when reacting acids and bases.
Advertisement
-
Know the difference between acids and bases. If you are looking to neutralize acids like citric acid, you should know what they are. Acids are compounds that easily give up a proton (hydrogen ion). As such, they are called proton donors. Bases are compounds that readily accept extra protons and are called proton acceptors. Acids and bases neutralize each other because a base can accept the acid’s extra protons, which usually results in the formation of water, salt, and sometimes a gas such as CO 2 (depending on which acids and bases you react, the products will be different).
-
Realize that water is amphoteric. Many acid and base reactions are done in water. This is an important fact since water can act as either an acid or a base. That is, the H 2 O molecule can donate a proton and become a hydroxide ion (OH - ) or it can accept an extra proton and become a hydronium ion (H 3 O + ). The ability to function as an acid and a base is referred to as amphoterism.
-
Understand common byproducts of acid/base reactions. Because acids and bases form ions, they will also form salts when they react. Strong acids and bases dissociate completely in water and usually form only salt and water when mixed. Weak acids and bases only dissociate partially. That means that there may be other byproducts, such as carbon dioxide gas, when they are reacted.
- An example of a strong acid and strong base mixing is NaOH (sodium hydroxide) and HCl (hydrochloric acid). When they mix, the salt NaCl is formed along with water. No other byproducts are formed.
- A common example of a weak acid and base reaction is the one that occurs between citric acid and baking soda. The reaction forms salt, water, and carbon dioxide.
Advertisement
Expert Q&A
Search
-
QuestionWhat happens when you add phosphoric acid to citric acid?Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.Phosphoric acid (H3PO4) is also a weak organic acid like citric acid. Combining the two yields cyclohexane, water, and dihydrogen phosphate (the conjugate base of phosphoric acid). At some concentrations, phosphoric acid can be corrosive. Also, adding an acid to another acid will not neutralize the solution and could make it more acidic and/or dangerous to handle in the kitchen or the lab.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Acids and bases are corrosive and can be dangerous. You should always wear gloves when handling either one. If you are using strong acids and bases, it’s a good idea to wear protective goggles, as well.Thanks
Advertisement
References
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
- ↑ http://www.physics-chemistry-class.com/chemistry/dilution-acid-base.html
About This Article
Thanks to all authors for creating a page that has been read 49,279 times.
Reader Success Stories
- "This article is good and helpful for me for doing a small experiment in my science class."
Advertisement