"No Bootable Devices Found" Error: 6 Easy Fixes

PDF download Download Article
Fix your computer so you can boot it up again and get back to work
PDF download Download Article

Are you getting a "No bootable devices found" error when you start your PC? It can be incredibly frustrating when your computer won't boot up. Luckily, you can do a few things to fix this error. This wikiHow article teaches you how to fix a "No bootable devices found" error on Windows 10 & 11.

Things You Should Know

  • "No bootable devices found" is usually caused by an incorrect boot order, broken master boot record, missing boot files, or a corrupt drive.
  • Check the boot order in the BIOS. If that doesn't work, run the Startup Repair tool and scan the drive.
  • Even if you can't boot into Windows, you can still access troubleshooting tools in Windows Recovery Environment.
Method 1
Method 1 of 6:

Checking the Boot Order

PDF download Download Article
  1. "No bootable devices found" and similar errors often occur when the boot order is wrong. To fix it, boot into the BIOS . Start by shutting down your PC. Press the Power button to boot it up. Some PCs allow you to enter the BIOS by holding down Shift while your PC boots up. Most computers have a dedicated button you press on the keyboard to enter the BIOS during start-up. It's different from one computer manufacturer to another, but it's usually. F1 , F2 , F3 , F10 , F12 . Del , or Esc .
    • Alternatively, boot into the BIOS using the Windows Recovery Environment (WinRE). You can access WinRE using a Windows Recovery drive or by using the following steps: [1]
      • Shut down your computer.
      • Press and hold the Power button to boot up your computer.
      • Press and hold the Power button immediately (when you see the manufacturer's logo) to force it to shut down again.
      • Repeat 3 times.
      • Press the Power button to boot up your PC and allow it to boot into WinRE.
      • Select Troubleshoot .
      • Select Advanced Options .
      • Select UEFI Firmware Settings .
      • Select Restart .
  2. The BIOS is different for each manufacturer. Normally, you will see a menu called "Boot," "Boot Options," or similar at the top. Use the arrow keys on the keyboard to navigate to this menu and press Enter to select it.
    Advertisement
  3. Change the boot order so your computer's hard drive (usually the "C:" drive) boots first. Make sure USB drives or CD/DVD drives are set to boot second.
    • Alternatively, if removable or optical drives are first in the boot order, make sure you don't have any flash drives or CD/DVD/Blu-rays inserted. If you do, your computer is trying to boot from that instead of your hard drive. Remove the disc or flash drive, then reboot your PC.
    • If you're intentionally trying to boot your PC from the connected flash drive or disc, you may need to make a new one .
  4. Your computer should boot into Windows from your hard drive.
    • If you still get "No bootable devices found," continue to the next method.
    5. Advertisement
Method 2
Method 2 of 6:

Running Startup Repair

PDF download Download Article
  1. To do so, you can do so by creating a Windows Recovery drive and inserting it into a USB port on your computer and restarting it. Note that if you do this, you'll need to change the boot order so that removable/USB drives come first—the opposite of what you did earlier .
    • Alternatively, if you don't have a recovery drive, use the following steps to access WinRE:
    • Shut down your computer.
    • Press and hold the Power button to boot up your computer.
    • Press and hold the Power button immediately (when you see the manufacturer's logo) to force it to shut down again.
    • Repeat 3 times.
    • Press the Power button to boot up your PC and allow it to boot into WinRE.
  2. This tool does a great job of fixing Windows boot errors, including "No bootable devices found." To get there:
    • Select Troubleshoot .
    • Click Advanced Options .
    • Select Startup Repair .
  3. Select a Windows user account with administrative privileges, type the password, and click Continue . Windows will start running Startup Repair to scan your startup files and fix errors preventing it from finding bootable devices.
    • Once the repair is complete, your PC should boot normally.
    • If you receive a message that says "Start Repair couldn't repair your PC," try another method.
    4. Advertisement
Method 3
Method 3 of 6:

Checking Your Hard Drive

PDF download Download Article
  1. If you have a Windows Recovery Drive, insert it, and reboot your PC to boot from it. If not, follow these steps to enter WinRE:
    • Shut down your PC.
    • Press and hold the Power button to boot up.
    • Press and hold the Power button immediately when you see the manufacturer's logo to force it to shut down again.
    • Repeat 3 times.
    • Press the Power button to boot up your PC and let it boot into WinRE.
  2. Here's how to get there:
    • Select Troubleshoot .
    • Select Advanced Options .
    • Select Command Prompt .
  3. This command will display which hard drive letter has your system volume next to "osdevice." It will usually be "C:".
  4. and press ↵ Enter . This will run a Check Disk scan for the hard drive with the system volume.
    • If the system volume is on a hard drive other than "C:", enter the correct drive letter.
    • If you receive any error messages after running Check Disk, Google the error message to see if you can find the cause and solution.
  5. \ /offwindir=C:\windows and press ↵ Enter . This will run a System File Check on your system volume. It will also attempt to fix any errors that it may encounter.
    • Again, if your system volume is on a different drive letter other than "C:", be sure to enter the correct drive letter.
    • If you receive any error messages after running System File Check, Google the error message to see if you can find the cause and solution.
  6. \ /cleanup-image /restorehealth and press ↵ Enter . This will use the DISM tool to run a disk image cleanup and do a health restoration of your system volume.
    • Again, if your system volume is on a different drive letter other than "C:", be sure to enter the correct drive letter.
    • If an issue is found and fixed, run the SFC command again.
  7. Your PC should be able to boot into Windows like normal.
    • If your computer is still unable to boot, you will need to try another method. [2]
    • Some PCs have a pre-boot diagnostic tool you can use to check for hardware failures. Usually, there will be a button you press to enter the diagnostic tool during the boot-up process.
      • On Dell computers, you will press F12 repeatedly after seeing the Dell logo. [3]
      • On HP computers, you will press Esc repeatedly. Then, select the option to run a diagnostic test. [4]
      • Check the user's manual or manufacturer's web page for your computer model to see if it has a pre-boot diagnostic test.
    8. Advertisement
Method 4
Method 4 of 6:

Fixing the Master Boot Record (MBR)

PDF download Download Article
  1. If you have a Windows Recovery Drive, insert it, and reboot your PC to boot from it. If not, follow these steps to enter WinRE:
    • Shut down your PC.
    • Press and hold the Power button to boot up.
    • Press and hold the Power button immediately when you see the manufacturer's logo to force it to shut down again.
    • Repeat 3 times.
    • Press the Power button to boot up your PC and let it boot into WinRE.
  2. Here's how to get there:
    • Select Troubleshoot .
    • Select Advanced Options .
    • Select Command Prompt .
  3. This command will attempt to fix the MBR and replace it with clean code.
  4. This will attempt to fix the boot sector if it is damaged or replaced with a non-standard boot sector.
  5. This option will scan all your drives and attempt to find any operating systems not found in your boot manager. It will display any installed operating system not found in the boot configuration data store.
  6. This will attempt to rebuild the boot configuration data store.
  7. Your computer should be able to boot into Windows without the "No bootable devices found" error. If not, continue to the next method.
    8. Advertisement
Method 5
Method 5 of 6:

Reinstalling Windows

PDF download Download Article
  1. If nothing else works, reinstall Windows . You'll need to create an installation media USB drive to do so. You can download the tool to create an installation drive for Windows 11 here and for Windows 10 here .
    • Since you can't boot into Windows, you'll probably need to do this from another Windows computer.
    • Note: You may lose some or all of your files when reinstalling Windows. Always be sure to backup your data whenever possible.
  2. You'll need a blank USB drive with at least 9 GB of storage space. Any files on the USB drive will be erased, so back up any files you want to keep.
  3. By default, you can find your downloaded files in your Downloads folder. Open the Windows Installation Media Creation tool you just downloaded.
  4. You'll need to accept the terms and conditions, select a Windows edition, and select the correct USB drive.
    • Be sure to select the same edition of Windows that you previously had installed.
  5. After you create a Windows installation drive, you will need to boot into your BIOS and change your boot order once again. This time, you will set your boot order to boot from a USB drive instead of your hard drive. Once you make the changes, save and exit the BIOS.
  6. Shut down your PC, then insert the flash drive into a free USB port. Power on the computer, and it will boot from the installation drive.
  7. During the process, you will be asked to enter your language and keyboard layout, accept the terms and conditions, and select a Windows edition. Follow the prompts to reinstall Windows.
    • During the process, you may be asked to enter a Windows activation key. You can skip this step if you do not have one.
    • Be sure to select the same Windows edition you previously owned.
    • During installation, you may be asked if you want to keep all your files and reinstall Windows, or erase everything and reinstall Windows. You can try to keep your files. If that doesn't work, you may need to try again and erase all your files.
    • If you cannot reinstall Windows on the drive, it's likely you have a hardware issue—probably a dead drive.
    8. Advertisement
Method 6
Method 6 of 6:

Replacing Your Hard Drive

PDF download Download Article
  1. If you've tried everything and cannot reinstall Windows, your hard drive may be corrupt or damaged. If this is the case, you must either replace your computer or get a new hard drive. If your desktop or laptop computer is under warranty, you may be able to get a replacement for free. If not, and your computer is upgradable, you can buy a new compatible drive from a computer store and install it yourself .
    • Once the hard drive is installed, you will need to reinstall Windows.

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      11 Possible Fixes to Solve the "Mobile Network Not Available" Error on Android
      How to
      Completely Uninstall the Riot Games Client & Vanguard
      How to
      Easily Update Your Graphics Drivers on Windows or Mac
      8 Easy Fixes for iPhone Messages that Won't Finish Indexing
      Freeze & Crash a Chromebook with Simple URLs
      What Causes Green Lines on an iPhone Screen? Plus How to Fix Them
      7 Ways to Fix a PS4 Controller That Won't Charge
      How to
      Test the Power Supply Unit (PSU) in Your PC
      How to
      Fix Blinking Orange Light on Fujifilm Instax Mini 11
      How to
      Clean a CD Player
      How to
      Repair an Electric Fan
      11 Ways to Fix Windows PC Booting up With a Black Screen
      How to
      Increase Bass on a Windows PC or Mac Computer
      How to
      Fix and Replace a PopSocket Top, Funnel, and Base
      Advertisement

      References

      1. ↑ https://www.ionos.com/digitalguide/server/configuration/how-to-enter-bios/
      2. ↑ https://learn.microsoft.com/en-us/troubleshoot/windows-server/performance/use-winre-to-troubleshoot-startup-issue
      3. ↑ https://www.dell.com/support/kbdoc/en-us/000181163/how-to-enter-the-built-in-diagnostics-32-bit-diagnostics-supportassist-epsa-epsa-and-psa
      4. ↑ https://support.hp.com/us-en/document/ish_2854458-2733239-16

      About This Article

      Thanks to all authors for creating a page that has been read 140,558 times.

      Is this article up to date?

      Advertisement