Download Article
Download Article
A broken latch is a hassle and makes it impossible to get underneath your hood and fill your oil, jump-start your battery, and refill wiper fluid. If your hood isn't opening because of a broken release wire, you can often pull the wire yourself from inside the car. But if the latch is broken, you'll need to get your hands a bit dirty. Luckily, it's fairly simple to do and can bide you some time before you bring your car in for repair.
Steps
-
Cool your engine for 30 minutes if it was running recently. Always let your engine cool off before you start poking around underneath the hood. If you used your vehicle recently, about 30 minutes should be enough. Without cooling, you risk burning yourself.- If you can feel the heat of the engine against your car grill or bumper, talk to a mechanic about overheating .
-
Engage the hood release from the inside of your vehicle. If your car requires a release to open, locate it within your vehicle. In most cases, it's underneath the dashboard left of the steering column. Pull or press it and it should lift the hood 1 to 2 inches (2.5 to 5.1 cm) without completely disconnecting it from the latch. [1] X Research source- If you can't find the hood release, look at the driver's manual provided by your manufacturer. Either find the physical copy or look on their website for your car model's manual in electronic format.
- If the hood release doesn't open your hood, the wire is probably broken .
Advertisement -
Find the latch from underneath your vehicle if it doesn't have grilles. If you have a mechanic's creeper—a mobile seat that helps you move while lying on your back—use it to roll yourself underneath the vehicle. If not, shimmy underneath on your back directly underneath the hood. At this point, you should be able to see a small hole with a small metal latch hanging down towards you. [2] X Research source- Give the ground a quick sweep before going under your car and wear clothes you don't mind getting dirty.
-
Locate the latch through your bumper if your vehicle has large grilles. If your vehicle has a grille with big enough openings, locate the broken latch from the front of your vehicle. Crouch down and look for the small metal latch directly underneath the spot where the front-center of the hood meets the car frame. [3] X Research source- If you're having trouble, follow the release cable—it connects to the latch from the driver's side of the car.
-
Remove your vehicle's grille to access the latch if you can't find it. Depending on the vehicle, you might be able to remove the grille without opening the hood. However, this only works for select models—refer to your vehicle's owner's manual or visit your manufacturer's website and locate information on hood removal. If you can access the screws holding your grille in place, you should be able to remove them with a Phillips head screwdriver. [4] X Research source- If you can see the latch and access it with a screwdriver, don't bother removing the grille.
- Unscrew and remove the parking lamps and turn signal lights before attempting to remove the grill.
Advertisement
-
Trip the latch with a screwdriver or long piece of metal. Reach toward the latch with a metal tool that is long enough to reach the latch—at least 10 inches (25 cm) should do the trick. Insert the metal piece in-between the latch and the metal piece it's hooked onto. Now, trip the latch by pressing it away from the hood. [5] X Research source- If you're having trouble, check the direction of the wire running from the latch—this is the direction you need to push the latch.
- If the hood does not open after tripping the latch, bring your car to a mechanic.
-
Lubricate the latch with a lithium spray lubricant if it's jammed. Purchase a spray lubricant—ideally lithium-based—with a bendable straw at the nozzle at least 8 inches (20 cm) long. Insert it into your grill or from underneath your car and apply it generously to the latch. Often, broken or stuck latches can be remedied with lubrication. [6] X Research source- Be sure to wear safety goggles if you apply the lubricant from underneath the car.
- Never use silicone spray as it can contaminate the oxygen sensor and impair engine performance.
-
Adjust the latch mechanism if it's misaligned. In many cases, latches don't work properly because they become misaligned. After locating the latch, loosen the bolts that hold it in place just enough that you can move it. Move it side-to-side so it aligns with the opening in the inner panel of the hood. Now, move the latch up and down until it fits flush between the fenders and the top of the hood while the hood is pressed upward. Finally, tighten the latch bolts.- Open and close your hood afterward to ensure it works properly.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Things You'll Need
- Work gloves
- Lithium spray lubricant with nozzle
- Safety goggles
- 10 inch (25 cm) Phillip's head screwdriver
- Flashlight
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- If none of the above options work, visit a mechanic.Thanks
- Be careful not to damage your car hood by pushing or pulling too hard when the latch is jammed.Thanks
- Always cool your engine for about 30 minutes before working under the hood.Thanks
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about car maintenance, check out our in-depth interview with Matthew Rava .
References
- ↑ https://knowhow.napaonline.com/hood-latch-problems-solutions/
- ↑ https://www.popularmechanics.com/cars/how-to/a258/1362982/
- ↑ https://youtu.be/vfbZX4MqC70?t=74
- ↑ https://knowhow.napaonline.com/hood-latch-problems-solutions/
- ↑ https://youtu.be/mCQCatoG9Rc?t=32
- ↑ https://www.popularmechanics.com/cars/how-to/a258/1362982/
About This Article
Thanks to all authors for creating a page that has been read 292,503 times.
Reader Success Stories
- "Now I know how to open the hood of my Dodge Caravan. Thank you."
Advertisement
"Now I know how to open the hood of my Dodge Caravan. Thank you."
"I found all info I needed easy to follow instructions."
