How to Open a Locked Door with a Bobby Pin

PDF download Download Article
PDF download Download Article

Getting locked out of your room or home can be stressful if you don’t have a spare key on hand. Luckily, you can avoid high fees from a locksmith by learning how to pick a lock yourself. To pick a lock on a door, you’ll need 2 bobby pins and some patience . One pin will serve as the pick and the other bobby pin will serve as a lever that you’ll use to turn the lock.

Unlocking a Door with a Bobby Pin

Bend one bobby pin into a pick, and the other into a tension lever. Stick the shorter, bent end of the tension lever into the bottom of the lock, and push it counterclockwise to apply tension. Next, stick the pick into the lock and feel for the pins. Press down on the handle of the pick to push up the pins.

Part 1
Part 1 of 2:

Creating the Pick and Tension Lever

PDF download Download Article
  1. Spread the wavy and straight ends of the bobby pin apart so that it bends at the center and looks like an L. This bobby pin will serve as the pick that you’ll use to unlock the door. [1]
  2. Use a knife or razor blade to remove the rounded rubber tip on the straight side of the bobby pin. This will be the end that you’ll stick into the lock to pick it. [2]
    • If you don’t have any tools, remove the rubber tip with your fingernail or teeth.
    Advertisement
  3. Stick the pin in about 1 centimetre (0.39 in), then fold the rest the bobby pin until it's flush against the face of the doorknob. This will bend the tip at an angle. [3]
    • You’ll use the bent end of the pin to disengage the pins in the lock.
  4. Take the wavy end of the pick and bend it up at a 30-degree angle to create the handle. This step isn’t necessary but will make picking the lock easier and more comfortable for your hands. Once you’re done creating the handle, the pick is done. [4]
    • The curvy end of the bobby pin will look like a coffee mug handle once you’re done bending it.
  5. Take a separate bobby pin and bend the top 1/3 of the pin so that it forms a hook. Do not spread both sides of the bobby pin apart as you did with the pick. Instead, bend both sides of the bobby pin in the same direction. [5]
    • You’ll use the tension lever to actually turn the lock once you’ve picked it.
    6. Advertisement
Part 2
Part 2 of 2:

Picking the Lock

PDF download Download Article
  1. Take the shorter, bent end of the tension lever and stick it into the bottom hole in your door lock. The tension lever will hang down the front of your doorknob. [6]
    • You’ll use the lever to maintain tension on the lock as you pick it and as a way to rotate the doorknob once you've picked the lock.
  2. Maintaining tension on the lever will rotate the barrel in the lock which will allow you to lift each individual pin. Push the lever until you feel some tension. You do not need to use a lot of force. [7]
    • Keep tension on the lock as you pick it.
    • This tension is necessary or the pins will just drop back down into the barrel, keeping the knob locked.
  3. Stick the slightly bent end of the pick into the lock so that the tip is facing upwards. The pins sit on the top portion inside of the keyhole. Feel for the pins with your pick by pushing down on the handle of the pick while it’s in the hole. Press down on the handle of the pick to push the pins up. [8]
    • Most traditional doorknobs will have 5 or 6 pins.
    • A key pushes the pins up in the exact position they need to line up with the barrel, thus unlocking the door.
  4. Some of the pins will slide up with ease as you push down on it with your pick, while others will have some resistance. Pins that have resistance are known as seized pins. Concentrate on the pins with a lot of resistance first. Locate a pin that’s hard to push up, and push down slowly on the handle of your pick until you hear a click. [9]
    • The click is the sound of the pin setting on the barrel.
    • You need to set the seized pins first before setting the other pins in place.
  5. Continue feeling for the pins with your pick and press down on the handle of the pick to lift up every pin. Once every pin is set on top of the barrel, the door will be unlocked. [10]
  6. Grab the end of the tension lever and turn it like a key until the door is unlocked. Your door is now unlocked! [11]
    • On most doors, you have to turn the tension lever counterclockwise to open the door but some doorknobs may differ.
    • The tension lever will only rotate fully if the pins are correctly set on the barrel of the lock.
    • Lock picking uses a rake and a tension wrench. The purpose is to slide along the lock's pins and push them into the cylinder. The pressure should be enough to catch the top pins and hold them in their place so the cylinder will spin once all pins are in place.
    • You can make the pick by straightening the 180-bend in the hairpin.
    • Then you will have a straight hairpin with little ridges. The little ridges will hit the pins and push them up as you slide the hairpin back and forth.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do you pick a deadbolt with a bobby pin?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    A deadbolt lock has pins and tumblers, so you’d use the same method covered in this article. You will need 2 pins, or a second thin, narrow tool that can act as a tension lever.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 23 Helpful 39
  • Question
    Does it work on window locks?
    Venus
    Community Answer
    If the window lock has a keyhole, then yes, it does work. It only works if there is a keyhole.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 9
  • Question
    The bobby pin is stuck in the car lock. How do I get it out?
    Community Answer
    Try a jigsaw blade or a small hacksaw blade to pry it out. The small, sharp teeth should grab it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Some locks only open in one direction. Before you begin, try to figure out which way the lock must be turned to open the latch and use the tension tool to hold tension in that direction the whole time. Otherwise, if you have to reverse direction, you will lose tension inside the lock, the pins will all spring back into their original positions and you'll need to start again.
        Thanks
        Helpful 5 Not Helpful 3
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • 2 bobby pins

      You Might Also Like

      How to
      Pick a Lock
      An Intro to Lock Picking Using Everyday Objects
      How to
      Pick a Lock with a Bobby Pin
      How to
      Open a 3 Digit Combination Lock: An Easy Guide
      How to
      Pick a Lock Using a Paperclip
      How to
      Open a Master Lock Combination Lock without the Code
      How to
      Pick a Filing Cabinet Lock
      How to
      Pick a Tubular Lock
      How to
      Pick a Mailbox Lock
      How to
      Pick an Old Skeleton Key Lock
      How to
      Pick a Sentry Safe Lock
      How to
      Pick a Master Padlock
      How to
      Make a Lockpick
      How to
      Make a Bump Key to Bump a Lock
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about opening a lock, check out our in-depth interview with Robert Vallelunga .

      References

      1. ↑ https://youtu.be/cjuT_63Ioig?t=53
      2. ↑ https://youtu.be/cjuT_63Ioig?t=58
      3. ↑ https://youtu.be/3HcV_2CB7jc?t=10
      4. ↑ https://youtu.be/cjuT_63Ioig?t=76
      5. ↑ https://pickeroflocks.com/how-to-pick-a-lock-with-a-bobby-pin/
      6. ↑ https://youtu.be/d2DxheDJSNQ?t=24
      7. ↑ https://youtu.be/cjuT_63Ioig?t=106
      8. ↑ https://youtu.be/iyZnmDcXeso?t=80
      9. ↑ https://youtu.be/cjuT_63Ioig?t=144
      1. ↑ https://youtu.be/d2DxheDJSNQ?t=43
      2. ↑ https://youtu.be/d2DxheDJSNQ?t=49

      About This Article

      Article Summary X

      To open a locked door with a bobby pin, separate the 2 ends so you’re left with a 90 degree angle in the middle of the pin. Then, insert the flat end of the pin into the lock, and bend the tip so the rest of the pin is pressed against the door. You should also twist another bobby pin to form a hook, which you’ll need to turn the lock. Once the hook is ready, hang it from the bottom of the lock. When you’re ready to rotate the lock, push the hook counter-clockwise. As you do this, point the tip of the other pin upwards inside the lock, and push out each pin from the barrel. If you have a pin that’s hard to push out, pull down on the handle of your hook until you hear a click. Once every pin has been removed from the barrel, the door will unlock. Finally, turn your hook counter-clockwise to open the door. For tips on how to make a handle for your pick, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 505,103 times.

      Reader Success Stories

      • Jopa Pang-ot

        May 7, 2021

        "I lost my key for my safe box where all my important documents are placed, like my passport. This is not the first ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement