How to Open a Paint Can

Opening a can of paint can leave you with a big mess to clean up. Fortunately, you can avoid splattered paint by opening your paint can with the right tools! Grab either a large screwdriver, paint can opener, or putty knife. Then, use the tool to pry open the lid. Once you open your paint can, you can easily paint your walls , for instance. When you are finished painting, use a hammer or rubber mallet to close your paint can.

Method 1
Method 1 of 2:

Opening a Paint Can

PDF download Download Article
  1. While a paint can opener is the best way to open a paint can, you can also use a screwdriver. Be careful not to put too much pressure on the lid when using a screwdriver, or it can get deformed. [1]
    • For best results, use a screwdriver with a tip about 1 ⁄ 4 – 1 ⁄ 2  in (0.64–1.27 cm) big. If you use a smaller screwdriver, opening the can may put too much pressure on the rim of the can and it can get deformed.
    • If your lid is deformed, it will be harder to close and take off next time.
  2. Place the tip of your tool underneath the lip. If using a screwdriver or putty knife, it is helpful to use the side of the tool to gain more leverage. [2]
    Advertisement
  3. After you position your tool under the lid, use moderate force on the handle. With a little bit of effort, the lid will separate from the paint can. [4]
    • If the lid does not come off the can in 1 motion, reposition your tool and try again.
  4. Continue prying the lid off in a consecutive motion. To do this, scoot the tool across the lid and lift up every 1 ⁄ 2 –1 in (1.3–2.5 cm) or so. Prying all of the lid off before opening the can prevents the lid from getting deformed and bent. [5]
    • Even if you're opening an old can of paint, you'll want to slowly and methodically work your way around the lid as you open it because there may be rust on the edges and you don't want to get that inside the paint. [6]
    • If the lid loses its flat shape, it will be hard to put the lid back on.
    • If you take the lid off from 1 side, you will bend it.
  5. Once you pry the lid off all the way around, place 1 hand on the lid, and gently lift up. Put the lid down on a flat surface with the paint side facing upwards. [7]
    • This way, you can easily pick up the lid when you are finished painting.
    • If there is rust in your paint, you can strain it out with a standard paint strainer. [8]
  6. In addition to paint can removers and screwdrivers, putty knives work well to open paint cans. If you choose a putty knife, use the side of the knife to maximize your surface area. [9]
    • These work well because you can easily pry the lid off with the thick, wide blade of the putty knife.
  7. Paint can openers are small tools designed to effortlessly pry the lid off of your can. When you buy your paint from a home supply store, ask the associate for a paint can opener as well. Oftentimes they give these out for free along with the purchase of your paint. [10]
    • Paint can openers are also available for purchase at most home supply stores.
    • Paint can openers have a small, curved tip that easily gets underneath the lip of the paint can so you can lift it up.
    8. Advertisement
Method 2
Method 2 of 2:

Closing the Paint Can

PDF download Download Article
  1. When you are finished painting, hold the tip of your brush up to the rim of your can, and move it around in a circle. Then, wipe the tip of your brush against the lid. This moves the paint on the rim back into the can. [11]
    • This way, your lid will not get sticky with paint.
    • Alternatively, you can use a rag instead of a paintbrush.
  2. After you wipe around the rim, lift up your lid and put it on top of the paint can with the paint side facing down. [12]
  3. Once the lid is in place, make small tapping motions on the lid. Continue tapping around the lid clockwise until the lid is securely in place. [13]
    • For best results, use a tool with a small head. You don’t need to pound the lid into place, and you can more easily tap the lid closed using a small tool.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What to use to open a paint can?
    Patrick Coye
    Painting Specialist
    Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.
    Patrick Coye
    Painting Specialist
    Expert Answer
    For a brand new can of paint, you can use a quarter, your keys, or the back of a fork/knife to pry the lid open. There are also specific paint opener tools you can use. You'll want to methodically work your way around the edges of the lid, moving inch by inch and prying it up until you can get the can open.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      • Can of paint
      • Paint can opener, screwdriver, or putty knife
      • Paintbrush or rag
      • Hammer or rubber mallet

      Tips

      • If you have a lot of paint dried in the rim of your can, use a screwdriver to scrape it out. This way, you can easily close it when you are finished painting.
        Thanks
        Helpful 0 Not Helpful 0
      • If you want to prevent paint from staying in the rim of your can, drill 2-6 holes into the rim so the paint can drain back into the can. This way, the paint cannot get trapped in the rim and dry onto the lid.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you cannot completely close your paint, it will go bad. You want the lid to be completely sealed to maintain the paint’s consistency.
        Thanks
        Helpful 0 Not Helpful 1
      Advertisement

      You Might Also Like

      Easy DIY Ways to Strip Paint from Plastic Materials
      How to
      Prep a Car for Paint
      11 Ways to Get Rid of Paint Smells
      How to
      Calculate Amount of Paint to Paint a Room
      How to
      Remove Acrylic Paint
      How to
      Prepare a Room for Painting
      How to
      Clean Oil‐Based Paint
      The Best Ways to Get Rid of Leftover Acrylics & Paint Water
      How to
      Tape Off a Room for Painting
      How to
      Scuff Sand
      Advertisement

      References

      1. ↑ https://youtu.be/qhRrGITtBRc?t=21s
      2. ↑ https://youtu.be/qhRrGITtBRc?t=19s
      3. ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
      4. ↑ https://youtu.be/qhRrGITtBRc?t=19s
      5. ↑ https://youtu.be/NQMJ1RFr0CU?t=48s
      6. ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
      7. ↑ https://youtu.be/Wt2Q_FhK4QU?t=1m34s
      8. ↑ Patrick Coye. Painting Specialist. Expert Interview. 19 August 2020.
      9. ↑ https://youtu.be/Wt2Q_FhK4QU?t=2m9s
      1. ↑ https://youtu.be/NQMJ1RFr0CU?t=30s
      2. ↑ https://youtu.be/Wt2Q_FhK4QU?t=3m9s
      3. ↑ https://youtu.be/Wt2Q_FhK4QU?t=3m48s
      4. ↑ https://youtu.be/Wt2Q_FhK4QU?t=4m26s

      About This Article

      Article Summary X

      To open a paint can, slide the tip of a paint can opener beneath the lip of the can and press down on the handle. Move the opener to the side just a little and repeat the motion. Work your way around the lid until it lifts up enough for you to take off the lid with your hands. If you don’t have a paint can opener, use a flathead screwdriver or a putty knife, but be careful not to put too much pressure on the lid or you could bend it. For tips on closing a paint can, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 116,425 times.

      Did this article help you?

      Advertisement