How to Paint Galvanized Steel

PDF download Download Article
PDF download Download Article

Because of its smooth, slick, zinc-coated finish, galvanized steel can be tricky to paint. Before you jump right into it, it’s critical to prep the nonstick surface so it can hold paint. Start by cleaning the steel thoroughly with a chemical degreaser. Once this is done, wipe down the exterior with white vinegar to lightly etch the surface and promote adhesion, and be sure to scour older steel with a high-grit sandpaper to remove any traces of oxidized zinc (or “white rust”). Finally, prime the steel with a multi-purpose outdoor latex primer, then finish with two even coats of quality exterior latex paint.

Part 1
Part 1 of 2:

Prepping the Surface

PDF download Download Article
  1. Spray the surface with the solution, then scrub it with a clean, lint-free cloth. A powerful degreaser will cut through dirt, grime, mold, and other problematic residue without affecting the temperamental zinc coating. Proceed in small sections until you’ve cleaned the entire surface.
    • Common household products like Comet, mineral spirits, and chlorine bleach can all be used to prepare galvanized steel for painting.
    • If you’re attempting to paint siding panels, roof flashing, or other materials that have seen exposure to the elements, a thorough cleaning is necessary to eliminate any organic contaminants from the outer surface. [1]
  2. Once you’ve finished cleaning the steel, let it rest until all traces of the degreaser have evaporated. That way, you won’t have to worry about the solution interfering with the action of the vinegar, which you’ll be using to rough up the smooth steel.
    • If possible, do your prepping and painting indoors, or on a clear day when there’s little moisture in the environment.
    Advertisement
  3. [2] When working with an item that’s seen some wear, you may noticed a chalky or powdery film on parts of the surface. This can easily be buffed out with a high-grit sandpaper (120-grit or finer is preferable) and a little patience. Sand the steel using gentle circular motions until the exterior takes on a uniform appearance. [3]
    • Afterwards, wipe the surface with a cloth dampened with warm water to remove any lingering dust.<
    • This chalky substance is commonly known as “white rust.” It forms when the thin layer of zinc coating the steel begins to break down as a result of age or exposure to the elements.
  4. [4] Go over the galvanized steel thoroughly, applying more vinegar as needed. To ensure an even paint job, it’s important that it come into contact with every part of the exterior.
    • The acid in the vinegar will gently etch the slick zinc-coated finish, giving it a rougher texture that will allow paint to stick better.
    • If you happen to miss a spot, you may end up with splotchy, peeling paint.
  5. This will give it plenty of time to eat away at the galvanized surface. The longer it sits, the more pronounced the etching effect will be, and the better your paint will adhere. You might even let it work overnight if the timeframe for your project allows.
    • If you’re short on time, wait until the surface is dry to the touch before moving on to priming and painting.
    6. Advertisement
Part 2
Part 2 of 2:

Priming and Painting the Steel

PDF download Download Article
  1. [5] Brush or spray the primer onto the prepped steel surface. Work in small sections, aiming for even coverage. Make sure there are no gaps or thin spots that might cause an issue later on when it comes time to paint. [6]
    • For maximum hold and durability, choose a multipurpose latex primer that’s designed for exterior use.
    • If the steel is destined for rough industrial or outdoor conditions, consider upgrading to a high-performance epoxy primer. Epoxy primers offer a semi-permanent hold, and are resistant to scratching, chipping, and peeling.
  2. This may take anywhere from 2-6 hours, depending on the product used. To test whether the primer is ready to accept paint, run the pad of your finger over the surface. If it feels tacky, it needs to dry a little longer.
    • Applying paint to wet primer will hinder its ability to stick.
  3. In most cases, a standard latex paint formulated for exterior use will get the job done. [7] These are readily available at most home improvement centers and hardware stores. Avoid using alkyd-based paints (such as spray paint) on galvanized steel. [8]
    • For the most dependable results, look for paints that are formulated specifically to bond to galvanized steel.
    • The enamels in alkyd paints can react with the slick zinc finish on a galvanized steel surface, leading to poor adhesion and peeling.
  4. Spread the paint across the surface with long, linear strokes. Use the tip of your brush to dab the paint into grooves, creases, and textured areas. Check to make sure there are no gaps or missed spots before moving on.
    • A roller may come in handy for applying paint to broad surfaces like siding and roof panels.
  5. It will typically take 3-4 hours before the surface is ready to accept another coat. In the meantime, avoid handling the fresh paint. Doing so may leave behind smudges or creases in the completed finish. [9]
    • Expect drying times to be longer in warm, humid conditions.
  6. Two coats will usually be enough for the majority of projects. Apply the topcoat the same way you did the first. Take your time to ensure that there are no inconsistencies in the topcoat—any imperfections may be visible once the paint has dried. [10]
    • Indirect airflow from a box fan or air conditioning unit may help the topcoat set up faster.
    • Once the topcoat is dry, you can go ahead and install the piece or put it to its intended use.
  7. Though most latex-based paints dry in a matter of hours, it can take them a few weeks (or as long as a month, in some cases) to fully harden. If possible, avoid subjecting the steel to stress and wear like pressure, heavy precipitation, or drastic fluctuations in temperature until then. At that point, it will be ready to take whatever you can throw at it.
    • When properly applied, the paint job on your galvanized steel will enjoy a long lifespan and be more resilient to extreme conditions.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What kind of paint do you use on galvanized steel?
    James Guth
    Painting Specialist
    James Guth is the co-owner and founder of Chesapeake Painting Services LLC. With over 20 years of experience, James specializes in exterior and interior painting, drywall, powerwashing, wallpaper, staining, sealing, and carpentry. James holds a BS in Economics and Business Administration with a concentration in Finance from Towson University
    James Guth
    Painting Specialist
    Expert Answer
    I would recommend using latex-based primer and paint. I would not use any type of oil-based paint on galvanized steel.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
  • Question
    How do you clean and prep steel?
    James Guth
    Painting Specialist
    James Guth is the co-owner and founder of Chesapeake Painting Services LLC. With over 20 years of experience, James specializes in exterior and interior painting, drywall, powerwashing, wallpaper, staining, sealing, and carpentry. James holds a BS in Economics and Business Administration with a concentration in Finance from Towson University
    James Guth
    Painting Specialist
    Expert Answer
    After you degrease the steel, you may need to scour it. If the steel is older or dirty, scour it to remove any dirt, debris, rust, or oil. Keep in mind that rust on steel can look white. Finally, wipe the steel down with mineral spirits.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 3
  • Question
    Can I spray latex paint on galvanized metal?
    Community Answer
    Yes, but it can make it look unprofessional and odd. Hand painting is the better choice.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 6
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Galvanized steel surfaces are sometimes treated with chemicals called passivators, which protect the exterior from corrosion but can complicate painting. To test for the presence of passivators, sand down an inconspicuous spot on the finish and swab it and the surrounding area with copper sulfate diluted with water. If the two darken at different rates, it’s likely that a passivator has been used on the steel, and it cannot be painted without special weathering.
        Thanks
        Helpful 0 Not Helpful 1
      • Pull on a pair of disposable rubber gloves to prevent substances like chemical cleaners and latex paint from getting on your hands while you work.
        Thanks
        Helpful 0 Not Helpful 0
      • Painting galvanized steel is a quick and inexpensive project that anyone can tackle themselves—it only requires a little bit of paint and primer and a few hours of labor, most of which is drying time.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Since most spray paints contain alkyds, it tends to be difficult to spray paint galvanized steel successfully.
        Thanks
        Helpful 3 Not Helpful 4
      Advertisement

      Things You'll Need

      • Chemical degreaser
      • Distilled white vinegar
      • Lint-free cloth
      • High-grit sandpaper or wire brush
      • Exterior latex primer
      • Exterior latex paint
      • Paintbrush or roller
      • Rubber gloves

      You Might Also Like

      How to
      Paint Brass
      How to
      Paint Over a Chrome Surface
      How to
      Powder Coat
      How to
      Paint Cast Iron
      How to
      Paint Metal Surfaces & The Best Paint to Use
      How to
      Spray Paint Metal
      Painting a Metal Roof the Right Way: Best Tips, Tricks, & More
      How to
      Paint Stainless Steel
      How to
      Paint Metal Knobs
      A Beginner's Guide to Painting Metal Cabinets
      How to
      Paint Rusty Metal
      A Step-by-Step Guide to Preparing a Wrought Iron Fence for Painting
      How to
      Fix Paint Runs on Metal
      How to
      Paint Black Wrought Iron
      Advertisement

      References

      1. ↑ https://www.todayshomeowner.com/how-to-paint-galvanized-sheet-metal-gutters-or-valley-tin/
      2. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      3. ↑ https://www.todayshomeowner.com/how-to-paint-galvanized-sheet-metal-gutters-or-valley-tin/
      4. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      5. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      6. ↑ https://www.todayshomeowner.com/how-to-paint-galvanized-sheet-metal-gutters-or-valley-tin/
      7. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      8. ↑ https://www.todayshomeowner.com/how-to-paint-galvanized-sheet-metal-gutters-or-valley-tin/
      9. ↑ https://www.bobvila.com/articles/how-long-does-it-take-paint-to-dry/#.Wkfn-t-nHIU
      1. ↑ https://www.todayshomeowner.com/how-to-paint-galvanized-sheet-metal-gutters-or-valley-tin/

      About This Article

      Article Summary X

      To paint galvanized steel, start by applying a latex-based primer evenly across the surface to stop the paint from soaking into it. Let the primer dry completely, which should take anywhere from 2-6 hours, so your paint will stick properly. Once the primer has dried, apply your first coat of paint with a brush or roller. Let your paint dry for 3-4 hours. When the paint is dry, apply your second coat on top. If possible, avoid subjecting your steel to pressure, heavy rain, or significant changes in temperature for the first month after painting it to allow it to fully harden. For more tips, including how to prepare your galvanized steel before painting it, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 197,678 times.

      Did this article help you?

      Advertisement