Bluetooth headsets are common accessories for modern people-on-the-go. Using a Bluetooth headset with your phone allows you to make and receive calls without needing to touch or hold a phone in your hand, which makes them super convenient for commuting, shopping, and even a morning run. As long as your phone is Bluetooth-capable, pairing it with a Bluetooth headset is a cinch.
Steps
Part 1
Part 1 of 2:
Preparing the Headset
-
Charge your headset. Starting with a full charge on both devices ensures that process won’t be interrupted by a low battery.
-
Put your headset in "pairing mode.” The process is similar across all Bluetooth headsets, but there might be slight variations depending on model and manufacturer.
- For almost all headsets, this is done by starting with the headset power off, then pressing and holding the multi-function button (the button you press to answer a call) for a few seconds. First, a light will blink showing you that the unit is on (keep holding the button) and a few seconds later, the LED on the headset will blink in alternating colors (often red-blue, but this can be anything). The blinking lights indicate that the headset is in pairing mode.
- If your headset has a sliding on/off switch, slide it to the “on” position before pressing and holding the multi-function button.
Advertisement -
Put your headset close to your phone. The devices will need to be close to one another in order to pair. The distance varies, keep the devices within 5 feet (1.5 m) of one another for the best results. [1] X Research sourceAdvertisement
Part 2
Part 2 of 2:
Connecting the Headset
-
Charge your phone. Bluetooth can be a drain on your battery, so start with a full charge.
-
Start Bluetooth on your phone. If your phone was released after 2007, it is most likely Bluetooth-enabled. If you’re able to see a “Bluetooth” menu on any of the following operating systems, you’ll be all set. [2] X Research source
- If you’re using an iPhone, tap the Settings icon and look for a menu item called Bluetooth. If you see it there, your device is Bluetooth-capable. If it says “off” next to Bluetooth, tap it to turn it on. [3] X Research source
- Android users can tap the Settings icon in the app menu and look for Bluetooth there. If the word Bluetooth is the menu, your phone is Bluetooth-capable. Open the Bluetooth menu with a tap and flip the switch to the “on” position. [4] X Research source
- Users with Windows Phones will open the app list and select Settings to find the Bluetooth menu. If you see a Bluetooth menu, your phone is Bluetooth-capable. Open the menu to switch Bluetooth on. [5] X Research source
- If you’re using a Bluetooth-capable phone that isn’t a smartphone, navigate to your device’s settings menu to find the Bluetooth menu. Turn on Bluetooth in that menu.
-
Scan for Bluetooth devices from your phone. Once you’ve enabled Bluetooth on your phone, it should automatically begin a search for Bluetooth devices with which to connect. When the search has completed, a list of devices you can connect to will appear on the screen.
- Regular feature phones (non-smartphones) and older Android models may require you to scan for devices manually. If the Bluetooth menu contains an item that says “Scan for devices” or something similar, tap it to scan.
- If you don’t see any devices despite having turned on Bluetooth, your headset may not be in pairing mode. Restart your headset and re-enable pairing mode. Double-check your Bluetooth headset manual to make sure your particular headset doesn’t have a special process for pairing.
-
Select your headset for pairing. In the list of connectable Bluetooth devices, tap on the name of your headset. This may be the name of the headset manufacturer (i.e., Jabra, Plantronics) or may simply say something like “Headset.”
-
Provide a PIN code, if asked. When the phone "finds" the headset, it may ask for a PIN code. Enter the code when prompted, then click “Pair.”
- On the majority of headsets, this code is either "0000,” “1234,” “9999” or “0001.” If none of those work, try the last 4 digits of your headset’s serial number (found underneath the battery, labeled as “s/n” or “serial number”). [6] X Research source
- If your phone connects to the headset without a code, it simply means that no code is required.
-
Click “Pair.” Once the headset and phone are paired, you’ll see confirmation on the phone. It should say something along the lines of "Connection Established” (the actual message depends on your device).
-
Make hands-free phone calls. The headset and phone are now paired. The functionality on the headset will depend on the software and operation of the cell phone, but by placing the device on your ear in a comfortable position, you will now be able to make and receive phone calls without touching your phone.Advertisement
Community Q&A
Search
-
QuestionWhat should I do if my Bluetooth handset is not showing up on my cell phone?Community AnswerCheck both devices, and make sure that Bluetooth is turned on. Next, use your phone to scan for the headset. If the problem persists, check to see if they are compatible. This may involve checking the packaging, manual, and the internet.
-
QuestionHow do I connect a phone to a wireless headset?Community AnswerGo to "Bluetooth" in the phone, then select your headset device from the list. Click "connect."
-
QuestionWhat can I do if I don't know the password?Community AnswerOn the majority of headsets, this code is either "0000,” “1234,” “9999” or “0001.” If none of those work, try the last 4 digits of your headset’s serial number (found underneath the battery, labeled as “s/n” or “serial number”).
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Warnings
- Be familiar with mobile device use laws in your city, state or country. Bluetooth headsets may be prohibited in certain locations or under certain conditions. Visit http://www.distraction.gov for a frequently-updated list of locations where Bluetooth headsets are prohibited in the United States.Thanks
- While Bluetooth headsets help drivers avoid most distractions, it is still possible for a conversation to divert your attention away from the road. The safest way to drive is with no distractions at all.Thanks
Advertisement
References
- ↑ http://www.techlicious.com/how-to/how-to-fix-bluetooth-pairing-problems/
- ↑ http://www.drivinglaws.org/compat.php
- ↑ https://support.apple.com/en-us/HT204091
- ↑ http://www.androidcentral.com/android-101-how-pair-bluetooth-headset-0
- ↑ http://www.windowsphone.com/en-us/how-to/wp8/connectivity/pair-my-phone-with-a-bluetooth-accessory
- ↑ http://www.pcworld.com/article/209431/pair_phone_with_bluetooth_device.html
About this article
Article Summary
X
Before pairing a cellphone to a Bluetooth headset, first make sure the headset and phone are both fully charged. You’ll also need to put the headset in pairing mode. This usually involves sliding a switch to the right position or pressing and holding a multi-function button, but check the manual to be sure. When you’re ready to connect, place the headset close to your phone. Make sure Bluetooth is enabled in your phone’s settings. Once it is, your phone should automatically start scanning for available devices. Select your headset from the list and enter a PIN if prompted. This PIN should be listed on your phone’s packaging or in the manual. Depending on your phone, you may need to tap “Pair” to confirm.
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,333,128 times.
Advertisement
