The Best Patch Kits and DIY Fixes for a Leaky Air Mattress

PDF download Download Article
Learn how to keep your air mattress inflated for a comfortable night of sleep
PDF download Download Article

Have you been lying on an air mattress for a few minutes and it’s already deflated? Then you’re definitely dealing with a hole or tear somewhere on the surface. Rather than replacing the entire mattress, it’s really easy to find and patch the leak so you can get a comfortable night of sleep. We’ve got everything you need to know about locating the leak and what you can do to patch it with a kit or some quick DIY options you might already have at home.

Things You Should Know

  • Locate the leak by inflating your mattress and listening for a light hissing sound. You can also run your hand over the mattress to feel for air escaping.
  • Secure a vinyl patch over the hole using the adhesive backing or by applying rubber cement .
  • Try patching a small hole with duct tape or hot glue to temporarily fix your air mattress so it stays inflated through the night.
Method 1
Method 1 of 3:

Finding the Leak

PDF download Download Article
  1. Inflate the air mattress fully to test for a leak. Use the air pump that came with your mattress to inflate it. Keep your mattress inflated the entire time you search for the leak so it will be easier to detect. Even with a leak, your mattress will still maintain enough air to find the hole or tear. [1]
    • If you feel the mattress becoming soft, reinflate it before you start searching again. The higher the air pressure inside the mattress, the more noticeable the leak will be.
  2. Hold your hand over the valve and feel for any escaping air. Make sure the valve is completely plugged and isn’t leaking back out from the stem. Then, check the area around the valve stem to see if there are any tears or holes in the seams surrounding it. If you don’t notice any damage around the valves, then the leak is located somewhere else. [2]
    • If the valve is damaged, then it’s better to replace the full mattress rather than trying to fix it.
    Advertisement
  3. The majority of punctures and leaks occur on the bottom of the air mattress since something on the ground could have poked through. Stand the mattress up on its side and lean it against the wall to inspect the bottom. [3]
  4. Stand the mattress up on its side and lean it against a wall. Keep your ear about 2–3 inches (5.1–7.6 cm) away from your mattress, and slowly move your head across the entire surface. Start with the bottom of your air mattress before checking the sides and top. Try to listen for the thin, hissing noise of air escaping your mattress. [4]
    • Most punctures and tears happen on the bottom of your air mattress since something on the ground could easily poke through and cause a leak.
  5. Hold the back of your hand 2 inches (5.1 cm) away from your mattress. Push the mattress in with your other hand to increase the air pressure coming from the leak. Move your hand slowly across the entire surface until you feel a steady stream of air. [5]
    • Try wetting the back of your hand before running it over your mattress. The escaping air will make the water feel cooler so the leak is easier to detect.
  6. Fill a spray bottle with water and a few drops of dish soap, and mix them together. Lightly spray your mattress with the soapy water, starting near the valve and seams. Then, check the bottom and top of your mattress. Look for any areas where new bubbles are forming, which are a sign that air is leaking out. When you find the leak, wipe off all the soapy water with a clean towel. [6]
    • Work in small sections spraying and drying your mattress so you don’t have as much to clean up.
  7. When the mattress is deflated it will be nearly impossible to find the leak again. Draw a small circle or make a small dot on your mattress so you know where to apply your patch later on. [7]
    8. Advertisement
Method 2
Method 2 of 3:

Using a Patch Kit

PDF download Download Article
  1. Undo the mattress’s valve so the air can escape. If all the air doesn’t come out on its own, press down on your mattress to force the rest of the air out through the valve. [8]
    • Avoid putting a patch on while your mattress is inflated since air could get underneath the patch and ruin the adhesion.
  2. Smooth out the area around the hole with 120-grit sandpaper . Apply gentle pressure as you rub the sandpaper on your mattress. If your hole is on the top of your mattress and it has a fuzzy texture, sand the texture off of the mattress so the patch sticks to the material easier. [9]
    • Be careful not to press too hard with your sandpaper since it could thin the mattress material and potentially create another hole.
    • Most patch kits come with a small piece of sandpaper so you don’t need to buy it separately.
  3. Clean around the leak with isopropyl alcohol . Wet a clean cloth with your isopropyl alcohol, and wipe off the area around your leak so there isn’t any dust, dirt, or debris surrounding the hole. When you’re finished, pat the area dry with paper towels and let it air-dry for a few minutes. [10]
    • If you try applying the patch while your mattress is still wet, then it may not stick well and could come loose later on.
  4. Get a vinyl patch kit so you have everything you’ll need to fix the hole in your air mattress. Use a pair of scissors to cut the patch so it fits over the hole. Round the corners of the patch so it’s less likely to peel up later on. [11]
    • If you don’t have a patch kit, you can also cut a patch from a sturdy piece of plastic, such as a vinyl shower liner.
  5. Secure the patch onto your mattress with its adhesive backing or rubber cement . If your patch has an adhesive backing, then simply peel off the backing paper and press it over the hole. If the patch doesn’t have any adhesive, spread rubber cement on the back of the patch and onto the area around the hole. Press the patch down firmly so it makes good contact with your mattress. [12]
    • Follow the directions that came with your patch kit since they may vary.
    • Be careful not to get any adhesive inside or on any other part of your mattress. Otherwise, it may make the sides of your mattress stick together and form new tears.
  6. Use either an exercise weight or stack a few flat, heavy books on top of the patch while it sets. Since the adhesive needs time to completely set and seal the hole, leave your mattress deflated while it dries. [13]
    • If you try inflating your mattress too soon, it could make the patch come loose.
  7. Use your air pump to blow up the mattress completely. Then, place your ear right next to the patch and listen for any escaping air. If no one needs it to sleep, leave the mattress inflated overnight and return in the morning to make sure no more air is escaping. [14]
    • If there’s still air leaking out from the patch, then it may not have adhered properly. You can try patching over it again, or it may be time to get a new air mattress.
    8. Advertisement
Method 3
Method 3 of 3:

DIY Temporary Patches

PDF download Download Article
  1. Cover a hole with a piece of duct tape for a quick fix. Once you know where the leak is, cut off a piece of duct tape that’s about 1 inch (2.5 cm) larger than the hole or tear. Press the duct tape firmly over the hole so it doesn’t have any raised edges or wrinkles. For added protection, stick 4 more pieces of duct tape along the edges of the strip you just placed. [15]
    • The adhesive on the back of duct tape will start to break down after blowing up your mattress a few times, but it will at least stay inflated through a few nights of sleep.
    • If your air mattress is still losing air after you cover the leak, then try putting another layer of duct tape over the hole.
  2. Fix a tear in your mattress’s seam with a hot glue gun . Heat up your glue gun on the lowest temperature setting while your mattress deflates. Smooth out the torn section of your mattress so it lays flat on the floor. Once the glue is hot, run a bead along the edges of the tear. Wait about 5–10 minutes for the glue to completely dry before inflating your mattress again. [16]
    • Hot glue will start to crack and break down after you inflate your mattress a few times, so be sure to actually patch it as soon as you can.
    • Avoid touching the tip of your glue gun against the mattress since it could melt the material or make another hole.
    • Gluing your mattress or applying a DIY patch could potentially void the manufacturer’s warranty. Read through the warranty to see if you’re eligible for any replacements before you try a DIY method.
  3. Try filling a small hole with a dab of super glue . While the mattress is deflated, squeeze a small dab of super glue directly onto the hole so it creates a thin, even layer over the surface. Make sure the super glue doesn’t touch any other part of your mattress so it doesn’t create any other holes. Let the glue dry for a minimum of 4 hours before using your mattress again. [17]
    • Super glue works best on pinholes and tiny punctures. If you have a bigger hole, you’re better off using duct tape or an actual patch.
    Confidently utilize super glue when needed. "I was hesitant to use super glue on my mattress, but this guide recommends it for tiny holes. Following their instructions on putting just a dab over the puncture and letting it fully dry first, the super glue made a solid seal that held up through a 4-day camping trip." - Lou D.
    Repair a mattress on the fly with household items. "When my air mattress got a hole at a campsite, I had no patch kit. Using tips from this article, I temporarily fixed the leak with some silicone glue I had for repairing tents. My mattress stayed inflated all weekend thanks to this clever, makeshift patch using basic supplies we had on hand." - Verneitta K.
    Remember a key step when patching leaks. "After finding a leak in my mattress, my first reaction was to slap a patch on immediately. However, the article points out it's crucial to completely deflate the mattress first. Otherwise, air bubbles get trapped underneath, preventing a good seal. Remembering this vital step led to a patch that's lasted for months." - Robert G.
    Revive items through creative repairs. "I love the challenge of fixing up broken household items. When my old air mattress sprung a leak, these instructions strengthened my resolve to patch rather than replace it. Thanks to their patching tips and letting the adhesive cure underweight, my creative fix was a total success." - Jerry D.
    We want to hear from you! Advice from our readers makes our articles better. If you have a story you’d like to share, tell us here .
  4. Cut the piece of Flex Tape into a circle that extends past the edges of the leak by at least 1 inch (2.5 cm). Deflate your mattress and smooth out any wrinkles on the surface. Then, just peel the backing paper off the Flex Tape and press it firmly onto your mattress. Let the Flex Tape set for about 15 minutes before trying to blow up your mattress again. [18]
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    My manufacturer sent patches but no glue for my air bed. The instructions call for silicon or PVC glue. Is Gorilla Glue OK to use?
    Community Answer
    We haven't tested it, but Gorilla Glue is supposed to work on PVC sheets, the most common air mattress material. It's unlikely to work if your air mattress is made from rubber instead.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 53
  • Question
    What should I do if my air mattress came with a patch but no adhesive?
    Community Answer
    Unfortunately, due to shipping regulations, most air mattresses do not come with glue. You will need to purchase your own glue. The instructions that came with the patch may tell you what kind of glue works best for your mattress.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 34
  • Question
    How can I fix a leak on a side seam of the air mattress? Manufacturer's info didn't work, and it was a $50 mattress.
    Community Answer
    Plastic vinyl (PVC) mattresses are easily repaired using PVC pipe cleaner and cement. Yes, the very same stuff Home Depot, ACE Hardware, and Lowe's sell in the plumbing department. This makes a permanent repair after several hours, since the cement is a solvent fusing the patch to the mattress. The cement also works on PVC seats, toys, and most other similar items. Don't skip using the cleaner first, since it cleans and preps the plastic for best bonding using the cement. To keep the cement from drying out in the container, tighten the lid securely and store with the lid down.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 44
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • All air mattresses lose air naturally after they’re inflated for a few days. If the bed stays firm throughout the night, then you don’t need to patch anything.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Blow Up an Air Mattress & Keep It Inflated
      How to
      Locate a Leak in an Air Mattress
      6 Clever Ways to Fill an Air Mattress Without a Pump
      How to
      Dry a Mattress
      How to
      Roll Up or Compress a Memory Foam Mattress
      How to
      Clean Pee Out of a Memory Foam Mattress & Get the Smell Out
      Leaky Air Mattress? Simple Repairs for a Good Night's Sleep
      How to
      Move a Mattress: Simple Tips for Moving Without Professional Help
      How to
      Rotate a Mattress
      How to
      Stop a Mattress from Sliding
      How to
      Cut Mattress Foam
      How to
      Restore a Musty Mattress
      7 Places That Take Used Mattress Donations
      How to
      Dispose of a Box Spring
      Advertisement

      References

      1. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      2. ↑ https://www.bobvila.com/articles/how-to-find-a-hole-in-an-air-mattress/
      3. ↑ https://youtu.be/hRye7Q5czU8?t=113
      4. ↑ https://youtu.be/hRye7Q5czU8?t=133
      5. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      6. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      7. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      8. ↑ https://youtu.be/q1f8uYNWfiw?t=77
      9. ↑ https://youtu.be/D83P7fa-GS0?t=210
      1. ↑ https://youtu.be/Rzc2Upu6A9A?t=141
      2. ↑ https://youtu.be/q1f8uYNWfiw?t=72
      3. ↑ https://youtu.be/q1f8uYNWfiw?t=107
      4. ↑ https://youtu.be/q1f8uYNWfiw?t=107
      5. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      6. ↑ https://sleepyduckling.com/4-ways-to-fix-holes-in-air-mattresses-without-a-patch/
      7. ↑ https://www.sleepfoundation.org/mattress-information/how-to-fix-a-leaky-air-mattress
      8. ↑ https://youtu.be/5vTwvWcgfEg?t=100
      9. ↑ https://youtu.be/grdr3HD4_g4?t=387

      About This Article

      Article Summary X

      To patch a leak in an air mattress, start by using sandpaper to lightly scrub away the soft felt on the surface of the mattress around the hole to help the glue stick better. Next, cut out a square of thin plastic big enough to extend a centimeter past the hole on every side from something like a shower curtain or tarp. Then, cover the area around the hole with a strong adhesive, such as superglue or Gorilla Glue, and press the patch onto it. Finally, smooth the patch with your fingers and place a heavy object on top of it for at least 6 hours as it dries. For more tips, like how to find the leak in your air mattress, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,180,191 times.

      Reader Success Stories

      • Robert G.

        Nov 22, 2018

        "After finding a leak in my mattress, my first reaction was to slap a patch on immediately. However, the article ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement