PDF download Download Article PDF download Download Article

A permanent wave, also known as a perm, is a chemical hair treatment that can be used to add curl and body to your hair. Every perm has 2 parts: wrapping your hair around rods, and applying a chemical treatment. The process can take several hours, but the results are well worth it.

Prepping Your Hair for an At-Home Perm

Use a rat-tail comb to section your hair into 3 parts. Fold an end paper around the end of a strand of hair, then wrap the strand around a curling rod. Repeat until all your hair is wrapped in rods. Apply the perm solution to each rod in small, circular motions.

Part 1
Part 1 of 4:

Preparing and Sectioning Your Hair

PDF download Download Article
  1. Wash your hair with a clarifying shampoo . This will remove any oil or residue and give you a clean base to work on. Do not use any conditioner, however, or the perm solution won't set properly. Once you’ve washed your hair, pat it dry with a soft towel or old T-shirt. [1]
    • A rich, protein conditioning shampoo would also be a great choice.
    • It’s okay if your hair is damp, but make sure that it’s not soaking wet.
    • Brush your hair before you wash it, then run a wide-toothed comb through it after washing it.
  2. You do not want to get the perm solution on your skin, so you’ll have to take extra precautions. Wrap a towel around your neck first, then put on a plastic cape, like what you'd use for dyeing hair. Finally, pull on a pair of plastic or vinyl gloves. [2]
    • You can buy the cape and gloves at a salon or beauty supply store.
    • The cape must be plastic, otherwise the perm solution will soak through it.
    • It would be a good idea to put on old clothes that you don’t mind ruining.
    Advertisement
  3. Use the handle of a rat-tail comb to create 2 side parts, 1 on each side of your forehead. Make the middle section start at your forehead and end at your nape. Twist the 2 side sections into buns to keep them out of the way.
    • The middle section needs to be a little narrower than your rod. How many inches or centimeters wide this is will vary.
    • Consider splitting the top section in half at the back of your crown, then twisting the top/front section into a bun as well.
  4. Advertisement
Part 2
Part 2 of 4:

Wrapping Your Hair

PDF download Download Article
  1. Use the handle of a rat-tail comb to separate a thin strand of hair from the middle section. Pull it taut so that it is perpendicular to your head. Select a strand that is no larger than the diameter of the perm rod you plan to use, since packing too much hair onto a rod can result in limp curls.
    • You can start at your front hairline or at the back of your crown. If you did the latter, you’ll have to go back and do the front once you reach your nape.
  2. Place an end paper against the hair strand, so that half of it is hanging off the side. Fold the excess paper under the hair strand so that it's sandwiched inside. Next, slide the end paper towards the bottom of the hair section.
    • It would be a good idea to fold some end papers in half ahead of time. This way, you can just slide it over the edge of the hair strand, then pull it down.
  3. Place the end of the hair strand on top of a curling rod. Wrap the hair around the curling rod until you reach your scalp, then close the rod. [3]
    • Choose a rod size that’s appropriate for the curl size you want. Remember: the larger the rod, the larger and looser the curl.
    • Roll the rod downward, away from your forehead and towards your nape.
  4. If you started from the back of your crown, work your way down to your nape first, then go back and do the front section. If you started from your hairline, just work your way down to your nape.
    • Make sure that all of the hair from the middle section goes into the rod.
  5. Choose a side to start with, and unravel the run. Create a vertical part, somewhere behind your ear, and wrap the front section of hair into a bun. Apply more rods horizontally in a vertical column, then do the front section of hair (the one that’s in front of your ears). [4]
    • The ends of the rods need to be touching each other--including the side-back section and the middle section.
    • Start applying the rods at the top of the side section, right under the middle section, and finish at your hairline.
    • At this point, your hair may start to dry as you work with it. If that happens, simply mist it with water. This will make it easier to wrap around the rod.
  6. This is very important, as you’ll need some sort of barrier between your skin and the perm solution. Purchase a strip of cotton batting from an online or local beauty supply store, then wrap it around your hairline, tucking it under the edges of the rods. [5]
    • The cotton batting is not fabric. It looks like a long cotton ball. It’s similar to what you’d find at a nail salon.
  7. Advertisement
Part 3
Part 3 of 4:

Applying the Perm Solution

PDF download Download Article
  1. There are 2 types of perm solutions: alkaline and acid. Depending on your hair type , you’ll need to choose 1 or the other. If you choose the wrong type, you may end up with different results--or in some cases, you may damage your hair.
    • Choose an alkaline solution if your hair is: Asian, coarse, fine, resistant, or has low elasticity.
    • Choose an acid solution if your hair is: damaged, fragile, highlighted, tinted, or has high elasticity.
    • Visit a salon if you have hair that has been extensively color treated or damaged, or if you have African-American hair. Choose a stylist who specializes in working with your hair type. Ask friends and family to recommend a good salon, or search for online reviews of local salons.
  2. Perm solution comes in a plastic squeeze bottle. While you can snip the tip off, it is better to pierce it with a pin, like a thumb tack or a push pin. This will give you better control over the product. [6]
  3. Choose a section to start with: middle, left, or right. Position the bottle over the top edge of the rod, and begin to squeeze out the solution using a small, circular motion. Work 1 rod at a time until you complete the entire section, then move on to the next one. Use the entire solution that came in the bottle. [7]
    • Don’t worry about applying the solution over the entire rod. Gravity will pull the solution downward toward the bottom of the rod.
  4. Wait 5 minutes first, then pick a rod and unravel it slightly. Take a look at the hair, and see if you can spot a tight S-shape. If not, wrap the hair back up. Check it again after 2 minutes. If you still don’t see the S-shape, check it every minute afterwards until you do. [8]
    • Don’t wait the full 10 to 15 minutes before checking your hair, or you’ll risk damaging it; everyone’s hair processes differently.
    • When you see the S-shape in your hair, you’re ready for the next step.
  5. This is important. Leave the rods in your hair. Simply lean over a sink or step into a shower, then rinse the solution from your hair for 3 minutes. [9]
    • The cotton batting will get soaked, so you should remove it when you’re done rinsing.
    • If you have very thick hair, run water between each rod for several seconds to make sure you rinse all the solution out thoroughly.
  6. It would be best if you let your hair air dry, but if you are in a hurry, you could use a hair dryer to speed the process up. Do not take the rods out yet. [10]
  7. Use the same technique when applying the neutralizer as you did for the perm solution. Since the neutralizer is gentler, you can wait the full 10 minutes without checking your hair. Once the 10 minutes are up, rinse your hair for 3 minutes. [11]
    • Keep the rods in your hair for the duration of the process.
  8. Again, it’s better to let your hair air dry, but you can use a hairdryer, if needed. Once you remove the rods, leave your hair alone. Do not brush or comb it, or you’ll undo the curls.
    • At the most, you can gently style the curls with your fingers.
  9. Advertisement
Part 4
Part 4 of 4:

Maintaining Your Perm

PDF download Download Article
  1. This may feel gross, but it is very important. Curly hair doesn’t need to be washed as often, for starters. Also, if you wash your hair too soon, you’ll undo all of your hair work; the curls will come out. [12]
    • After those 3 days, you can wash your hair twice per week.
  2. They'll keep your hair looking smooth and soft while prolonging the perm. Use conditioner each time you wash your hair; swap it out for a deep conditioner every so often. A natural deep conditioner, like argan oil, is a great option.
    • Moisturizing, curl-enhancing products are a great choice.
    • Don't use products containing silicones and alcohol. Silicones will lead to build-up, while alcohol will make it turn dry. [13]
  3. You can gently comb your hair with your fingers or a wide-toothed comb, but you’ll have to wait 1 week before you brush it. More importantly, leave your hair as-is for the duration of the week. This means no curling, straightening, ponytails, braids, etc. [14]
    • Tie your hair up in a silk scarf when you go to bed. This will help keep your curls frizz-free.
  4. When possible, let your hair air dry. If you must use a hairdryer, wait until your hair is about 90% dry, then blow dry it with a diffuser. Avoid straightening when possible.
    • If you must straighten your hair, apply a heat protectant and use a lower heat setting.
    Chris McMillan, Celebrity Hairstylist

    Minimize heat styling. "Lay off the styling. Limit blow-drying and flat ironing to once a week, and stretch out the times between styling. Usually, hair looks better one or two days after you blow-dry it, anyway."

  5. If you dye your hair too soon, you not only risk damaging your hair further, but you may lose your curls. Once those 2 weeks are up, however, you can treat your hair like you would regular hair; you can dye it, bleach it, or even highlight it. [15]
    • Keep in mind that bleaching and highlighting are not recommended. The perming process is harsh to begin with; bleaching and highlighting are also harsh and will damage your hair further.
    • Some stylists recommend that you wait 1 month before dyeing, bleaching or highlighting your hair. [16]
  6. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do you make your hair naturally curly?
    Laura Martin
    Licensed Cosmetologist
    Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.
    Licensed Cosmetologist
    Expert Answer
    You can use curl enhancing products to make the most of your natural hair texture. You can also use rollers or pin curls to set the hair without heat or chemicals.
  • Question
    How long do perms last in your hair?
    Laura Martin
    Licensed Cosmetologist
    Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.
    Licensed Cosmetologist
    Expert Answer
    A perm will start to loosen after about 2-3 months and should be retouched to maintain the style. Tighter perms last longer than loose ones.
  • Question
    Do perms ruin your hair?
    Laura Martin
    Licensed Cosmetologist
    Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.
    Licensed Cosmetologist
    Expert Answer
    Perms use chemicals to permanently alter the structure of your hair. If used repeatedly they can cause damage, especially if combined with other chemical treatments like hair color.
See more answers
Ask a Question
      Advertisement

      Tips

      • When getting your hair permed at a salon, make it clear what you want and what you don't want. Be as detailed as possible. Bring pictures from a magazine or show your stylist pictures on your phone to give them an idea of what you want.
      • Don't lay your head down when you first get a perm, because it will permanently make marks on your hair.
      • Apply a volumizing product to your roots as they grow, then blow dry your hair at the scalp to create additional volume.
      Show More Tips

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Always use gloves when applying the perm to protect your skin from the chemicals.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Too much perming can damage your hair, leaving it brittle and thin. Always consult a professional hair stylist if this happens to you.
      • If your scalp starts to burn while the perm is activating, wash the solution out immediately.
      Advertisement

      Things You'll Need

      • Clarifying shampoo
      • Perm kit (solution and neutralizer)
      • Old clothes
      • Old towel
      • Plastic cape
      • Plastic gloves
      • Pin
      • 25 to 35 perm rods
      • 25 to 35 end papers

      About This Article

      Article Summary X

      To perm your own hair at home, first shampoo your hair and pat it dry so it’s not soaking wet. Skip conditioner since it will stop the perm solution from setting properly. Drape a towel around your neck and put on a plastic cape and plastic gloves so you don’t get any perm solution on your skin. Now, part your hair into 3 sections and tie the side sections into buns. Pull a thin section of hair from the middle section at the front of your hairline taut. Then, fold an end paper over the section and slide it up over the ends of your hair. Hold a perm roller over the end paper and roll it down the length of your hair until you reach your scalp. Close the rod to secure it in place. Now do the same thing with another thin section of hair behind the first rod. Repeat the process until you’ve worked your way through the middle section of your hair to the nape of your neck. Next, undo one of the side buns. Divide your hair with a vertical part just behind your ear, then tie the section in front of your ear into a bun. Pull a thin strand of hair at the top of the back section taut, apply an end paper, and roll it up using a rod just like you did with your hair in the middle section. Then repeat with another thin strand of hair just underneath that rod. Keep rolling your hair up in rods until you get to the bottom of this section. Then, undo the bun in front of your ear and repeat the process with that section of hair. Do the same thing on the other side of your head so all of your hair is wrapped up. Now, tuck a thick strip of cotton underneath the rods along your hairline to protect your skin from the perm solution. Apply perm solution to your hair along each of the rods using a circular motion until you’ve used the whole bottle. Let the solution sit for 5 minutes, then unravel one of the rods and check to see if your hair has a tight S-shape curl. If it doesn’t, re-roll the rod and wait another 2 minutes before checking again. Keep checking every 2 minutes until your hair has a tight S-shape curl. Then, rinse your hair for 3 minutes without taking the rods out. Let your hair dry with the rods still in. Now, apply a perm neutralizer to your hair just like you did with the perm solution and leave it in for 10 minutes. Rinse out the neutralizer for 3 minutes and let your hair air dry again. Finally, take out all of the rods and enjoy your new perm! To learn more, like how to maintain your perm with proper washing and drying techniques, read on.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 3,092,628 times.

      Reader Success Stories

      • Sal Darling

        May 23, 2018

        "I found the steps easy to follow & it used no 'tech speak', which is brilliant for the beginner. ..." more
      Share your story

      Did this article help you?

      Advertisement