PDF download Download Article PDF download Download Article

Playing tag has always been about outrunning whoever is 'it.' But now, you can add a fun twist, making the game more about stealth and tact, by using flashlights to transform the game. Depending on how many people want to play flashlight tag, you can play as individuals or as a team. Either way, you'll have a lot of fun!

Method 1
Method 1 of 3:

Playing with One 'It' Person

PDF download Download Article
  1. Make sure that there are a lot of hiding spots and that it's a safe place to run around.
    • Although flashlight tag is typically played outside, you can also play inside with the lights off! Just be sure to clear away anything that someone could trip on during the game. [1]
    • When playing outside, you don't have to play when it is completely dark. If you need to be home by a certain time or if you get scared at night, you can play at dusk or in a better lit area (such as a park). [2]
    • You can also play with silly string during the day instead of a flashlight. [3]
  2. You only need three people to play this game, but the more people you can get to play, the better! [4]
    • Ask some of your neighborhood friends to play on a weekend. This game is also fun to play when you have a party or sleepover.
    • Flashlight tag can also be played with your family. If you have brothers or sisters, ask them if they would like to play. If you are an only child, ask your parents or grandparents.
    • If your parents hesitate to let you play outside when it's dark, ask if one of them would play or at least come with you. Your friends' parents might also feel better knowing an adult is there.
    • Bring some extra batteries with you, in case the batteries in your flashlight quit working in the middle of the game. [5]
    Advertisement
  3. This person will have the flashlight and will be responsible for "tagging" people.
    • If more than one person wants to be 'it,' you can draw straws, pick numbers out of a hat, or flip a coin.
  4. Have the person who is 'it' count to a set number (such as 100), while everyone else hides.
    • The person who is 'it' should close their eyes or wear a blindfold during this time.
    • Good hiding places can be found through nature. You could, for example, hide behind a tree or a bush. You could also crouch below a large rock or hill. If you're playing in someone's backyard, make use of the structures. Hide underneath a slide. Hide under the table in the playhouse.
  5. After counting to the specified number, the person who is 'it' can then start to look for people. As with regular tag, once you are tagged, you are out. However, to tag someone in flashlight tag, the person who is 'it' must tag people with the beam of the flashlight and call their names.
    • In regular tag, if you can run faster than the 'it' person, you can evade them for a while. But with flashlight tag, the 'it' person can tag you with the light from a distance. Thus, while you are hiding, scope out your location and look for other places you could dart behind. To avoid being tagged with the beam from the flashlight, you'll need to put something between yourself and the 'it' person.
  6. When you are tagged, you must go to “jail,” a specified location where all the people who are 'out' must wait until everyone else has been tagged by the person who is 'it.' [6] Once you are 'out,' you can no longer participate in the game, but watching and cheering from the sidelines is also fun!
    • Alternately, instead of playing until everyone has been tagged, you can also play with a rotating 'it' person. In this case, once someone is tagged, they become the new 'it' person and the person who tagged them hands over the flashlight. [7]
    • With a rotating 'it' person, you will need to hide not only from the current 'it' person but from everyone playing the game. Be sure that none of your friends see where you hide!
  7. The first person tagged and sent to “jail” in the last round will be the 'it' person for the second round. [8]
    • If you are playing with a rotating 'it' person instead of a “jail,” you don't need to restart the game, because it is never over!
  8. Advertisement
Method 2
Method 2 of 3:

Playing Team Flashlight Tag

PDF download Download Article
  1. Make sure there are a lot of hiding spots and that it is a safe place to run around. If a friend has a large backyard, you could play flashlight tag in an area away from street lights or porch lights. If you know a playground will be open after dark, consider playing there.
    • You can also play indoors with the lights off. This works best in a big, open room, like a furnished basement without too much furniture. Be careful playing around heavy furniture or household items that could break.
  2. Team flashlight tag is best played with a lot of people. If you have ten or more people who want to play, team flashlight might be more fun than playing with only one 'it' person. With team flashlight, half of the people playing are 'it' at the same time, so be sure to have enough flashlights for half of your friends.
    • Be sure to have extra batteries handy so that if someone's flashlight stops working mid-game, they can replace their batteries quickly.
    • You may also want to set a rule to employ if batteries do run out. For instance, if someone's batteries do run out, they would have 30 seconds or one minute to “pause” and replace their batteries before rejoining the game. During this “pause,” they could not be tagged 'out.'
  3. Be sure to split the group into two even halves, with approximately the same number of people on each team.
  4. The size of your “jail” will depend on how many people you have on each team. Your “jail” should be large enough for everyone from one team to fit comfortably. [9]
    • You can outline the “jail” with sidewalk chalk if you don't have a clearly defined area to use as the “jail.” [10] Be as specific about the parameters of the “jail” as possible, since people can be tagged out of “jail” by another member of their team.
  5. The easiest way to decide which team is 'it' would be to flip a coin. [11] You could also choose a representative from each team to play rock-paper-scissors.
    • Once a person goes to “jail,” they can be tagged back into the game by one of their team members. Thus, the 'it' team will need to guard the “jail.” Choose one or two people to act as guards during the game. [12]
  6. Allow one minute for the team who is not 'it' to run and hide. During this time, the 'it' team must remain in “jail” with their eyes closed. After the minute is up, the 'it' team can leave jail and begin tagging members of the other team. [13]
  7. To tag someone, a person should sneak up on a member of the other team and shine the flashlight on them. This person is then out and must go to “jail.” [14]
    • Make sure to quickly shine the light on the person you want to tag and then turn it off immediately. Otherwise, another person hiding in the area might see you and run away.
    • During this time, members of the not-'it' team should try to rescue the team members in “jail.” You can do so by tagging their hand, at which point they are back in the game. [15]
  8. A game of team flash light ends when everyone from the not-'it' team is caught and put in jail. However, if a game is taking too long, you can always agree that, after a certain point, the 'it'-team loses. For example, give the 'it'-team an hour to locate all the players before they lose.
    • After a complete team has been tagged 'out,' you can restart a new round. The not-'it' team from the last round will now be the 'it' team. [16]
  9. Advertisement
Method 3
Method 3 of 3:

Taking Precautions

PDF download Download Article
  1. If you're playing flashlight tag while camping, make sure to keep the field of play safe. Do not play too close to the campfire and tents. You do not want to risk getting burnt by the fire, or accidentally knocking down a tent late at night. [17]
  2. You should play flashlight tag with somewhat dim flashlights. You do not want to be shining bright lights into other player's eyes, as this can cause eye irritation. [18]
    • Never use laser pointers to play flashlight tag. Laser pointers can be extremely harmful to eyesight and even cause temporary blindness. This puts players at risk for falling and getting hurt.
  3. If you're playing flashlight tag, try to keep the play area small. For one, this can make the game more fun. If you're playing in an open area, like the woods, it can be nearly impossible to find everyone with unlimited access to hiding spots. Also, playing in a small area is good for safety. You do not want any players getting lost.
  4. If you're an adult supervising a game of flashlight tag, make sure you keep track of all the players. You do not want any kids to get lost or injured during a game. Do a quick role call before and after a game of flashlight tag to make sure everyone's accounted for.
  5. Advertisement

Video

Community Q&A

Search
Add New Question
  • Question
    What about if someone trips because we're playing at night?
    Community Answer
    Ideally you should play in an area where everyone knows the environment well and there is relatively smooth terrain, but you might want to have a first aid kit handy just in case.
  • Question
    What if my friend's flashlight runs out? Should I shine my flashlight on the player, or is that unfair?
    Antp2103
    Community Answer
    Pause the game and get some batteries; keep some spares on-hand just in case.
  • Question
    Can I play flashlight tag in a house with all the lights off?
    Brandon Safiran
    Community Answer
    It is best to do this outside in a open field because if you do it in your house, and you're running around in the dark, chances are you'll stub your toe or trip.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • At least one flashlight
      • Friends
      • Sidewalk chalk (optional)
      • A blindfold (optional)
      • Extra batteries

      About This Article

      Article Summary X

      To play flashlight tag, find at least 2 other people to play with and then wait until it's dark outside. When you're ready to get started, choose 1 player to be "it" and give them a flashlight. The person who's "it" should count to 100 while the other players hide somewhere in the dark. Once the 100 seconds are up, the player who's "it" needs to find alll of the hiding players and shine their flashlight on them. The first person to be found is "it" the next time around! To learn how to play team flashlight tag, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 186,339 times.

      Reader Success Stories

      • Amity Harden

        Oct 10, 2021

        "I've been looking for some other types of tag, and this totally helped! Thank you, wikiHow!"
      Share your story

      Did this article help you?

      Advertisement