Download Article
Download Article
If you've recently purchased a PlayStation 2 console, or you've been given one as a gift, you might not know how to use it yet. The PlayStation 2 is very fun once you get it up and running, here's how to do just that.
Steps
Download Article
-
Set up the PlayStation 2 . You can't play on the console if it's not set up in the first place. Setting up the PlayStation 2 console is not very hard and shouldn't take more than a few minutes, depending on how good you are with electronics. If needed, ask a friend, parent or sibling to help you set it up. -
Turn on the PlayStation 2. To turn on the PlayStation 2, you must make sure that the "main power" switch (located at the back of the console) is turned to the "on" setting. Without this switch on, the console will not work. When the switch is on, turn on the PlayStation by pressing the "reset" button on the front of the console. It should have a small green light.Advertisement -
Attach the controllers. The controllers for this console are not wireless so you will need to plug them in. There are some controller slots on the front of the console. Plug your control into controller slot number 1. The next control will go into controller slot number 2. Make sure the controllers are pushed all the way in to the slot. Also, make sure nobody will trip over the wires. -
Insert the memory cards. The memory cards are usually 8g but they can also come in 16g, which is usually more expensive. They can be inserted into the memory card slots which can be found next to the controller slots. If you don't have a memory card, you can't save any of your data so be sure to get one. -
Choose a game. If you only have one game, that's the one that you will have to play. If you have a selection of games, choose one from there. If you don't like any of your games, you will have to buy some new ones. You can always invite your friends to bring their games around and you can all play together. -
Open the game tray. The game tray can be opened by pressing the small blue button on the front of the console. It should be next to the green button. You don't have to hold the button, just tap it. -
Put the game inside the game tray. Make sure that the game is sitting properly inside the tray before you close it. To check that the game is in there properly, gently move it around with your hand. If it falls off of the tray, it wasn't in there properly. If it stays on the tray, you can close it. If you close it while the game isn't on the tray properly, the game can get jammed inside the machine and break. -
Close the game tray. The game tray can be closed by pressing the same small blue button on the front of the console that you used to open it. If you just push the tray shut with your hand, you can damage it and it might stop working. Also, don't push the tray to make it shut faster, that can break it too. -
Let the game start up. Once the game has started up, you can play using the on screen instructions.
Advertisement
Community Q&A
Search
-
QuestionMy PS2 game isn't starting but I don't have a memory card -- does that have something to do with it not working?Community AnswerIt shouldn't. If your game requires a memory card, it will usually give you an error saying so or it will say that it requires one on the back of the game's case. The memory cards just allow you to save your game, so if you get to level 100 in game x, you can turn off your console and when you get back to it, you can start on level 100 instead of level 1. If you are having issues playing a game, try cleaning the disc. Also try a different game to make sure it isn't the game itself.
-
QuestionWhat do I do if it says no disc?Community AnswerCheck the disk, the PS2 is so sensitive if the disc is even slightly scratched, it won't get read by the PS2. If there are no marks, your PS2 is gone. If there is nothing wrong with the disc, check the wires connected to the PS2 and make sure they are plugged in properly. If they are, and the disc still isn't reading, then it is the PlayStation, not the disc.
-
QuestionWhen I turn my PS2 on, it doesn't go to any of my games. They aren't scratched. It just says browser and system configuration right after I turn it on. What is wrong?Community AnswerYou have to configure your system before you can play any games.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Always save your game before switching off the console.Thanks
- Try to get as many games as you can afford so you'll have loads to choose from.Thanks
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Never cause physical harm to your PlayStation 2, as this may cause internal parts to break or even cut deep slits into the disc, rendering it illegible.Thanks
- Never leave a PlayStation 2 disk out of a case unless you're using it. It can get scratched and broken.Thanks
- Don't play continuously for more than a few hours without having a break. This can make you feel dizzy and overheat the console.Thanks
- Do not open the disc tray while playing a game. This won't cause damage to the PlayStation 2, but it may glitch the current game you're playing.Thanks
Advertisement
Things You'll Need
- A PlayStation 2
- Controllers
- A memory card
- A TV
- A PlayStation 2 game disc
About This Article
Thanks to all authors for creating a page that has been read 236,614 times.
Advertisement
