How to Prepare Resin Miniatures

PDF download Download Article
PDF download Download Article

If you’re into miniatures, painting them can be a fun hobby and a great way to bring those characters to life. But before you can get to the painting process, you have to first clean up the miniature and assemble all the pieces! Whether you simply enjoy painting miniatures as a pastime or use your miniatures to play games, learning how to prep them from start to finish will really enhance your experience.

Part 1
Part 1 of 2:

Trimming and Assembling Miniatures

PDF download Download Article
  1. As you work, you’ll be cutting and filing small bits of resin that will get into the air. You don’t want to breathe these in, so make sure there’s an open window or fan nearby. [1]
    • You may also want to consider wearing a face mask for extra protection.
  2. Some miniatures may be connected to a small base while others might be in a plastic frame. There are generally several pieces per miniature that need to be detached. Cut close to the miniature, but not so close that you risk cutting the figure itself. [2]
    • The frame is the casing or jacket that the miniature is attached to, and it’s often also called a “sprue”. [3]
    • To stay organized, work on one miniature at a time. Cut off all the pieces for that particular figure and complete it before moving on to another one.
    Advertisement
  3. Fill a small bowl with warm water and add a few drops of dish detergent. Dip the miniature in the bowl and use a toothbrush to gently scrub it all over. Make sure to get into all the cracks and crevices so no spray is left behind.
    • Use an old toothbrush or one that is designated for miniatures. You don’t want to accidentally brush your teeth with a brush that was covered in soap!
    • When miniatures are manufactured, they’re sprayed with a release agent that makes them easy to remove from the packaging. But, this spray can make it difficult to glue and paint the miniature, so it needs to be removed.
  4. Lay it out on a paper towel or dishtowel. Because miniatures are so small, it shouldn’t take very long to dry. You could dab away excess water to speed up the process if you want to. [4]
    • Avoid blowdrying the miniature. The heat could warp the resin and misshape your figurine.
  5. Try to hold the miniature in one hand and cut away from yourself with the other. Work on removing thin layers of resin rather than trying to slice through the entire piece all at once. [5]
    • Be careful during this process. Hobby knives are very sharp and it would be easy to slip and cut yourself.
    • You may notice some resin along the sides of the miniature from where it was cast—you can gently scrape these mold lines away with your hobby knife, too.

    Tip: Protect the surface you’re working on by laying down a cutting mat first. If you don’t have a cutting mat, you could use a thick piece of cardboard or even a cutting board for the same effect. [6]

  6. If there are areas you couldn’t get completely flat with the hobby knife, you could use a filing knife instead. This could be particularly useful for feet or parts that will need to sit flush against the miniature’s base. Just gently rub the filing knife back and forth until the area is smooth. [7]
    • A metal filing knife will work the best for this step.
  7. Miniatures, especially for fantasy games, often come with small parts that need to be attached once they’ve been unpackaged, like arms, swords, tentacles, and other features. They’re usually grouped together in the frame, or your miniature may come with instructions. Use a tiny drop of superglue on one part and then firmly press it together where it needs to join the rest of the miniature. [8]
    • For example, if you’re attaching a sword to an arm, place a dot of superglue on the sword and then press it against the arm so it’s in the right position.

    Warning: Superglue dries very fast, so be careful to not get it on your fingers while you’re working. If you do find you’ve gotten stuck to something, you can try using acetone to get the glue off. To prevent this risk, you could wear latex gloves while you work. [9]

  8. Most miniatures come with small bases so that you can set them up without worrying about them toppling over. Simply apply a thin layer of superglue to the bottom of the miniature and press it to its base for a few seconds. Then let it rest while you get your primer and paints ready for the next part. [10]
    • As you get more and more into miniatures, you’ll discover that you can even decorate and design the base to match the landscape for the miniature. For example, you could put a layer of glue on the base and then add sand or small rocks for a desert landscape. [11]
    9. Advertisement
Part 2
Part 2 of 2:

Applying Primer and Paint

PDF download Download Article
  1. For painting miniatures, acrylic paints work the best. You can buy a variety of colors from your local art store, gaming store, or online. Fill a cup with water to use to rinse your brushes. You’ll need a few different brushes so that you can get all the right detailing on your miniature: [12]
    • Buy an inexpensive set of synthetic or sheep hair paint brushes for your basic painting needs.
    • Get a dry brush to highlight large areas.
    • Use a fine brush for detail work.
  2. Use white primer if you’ll be painting with light or bright colors. Use black primer if you’ll be painting with darker shades. Shake the can of primer really well, then spray the miniature with a thin coat from about 12 inches (300 mm) away. Continually move the can so the primer isn’t too thick on any one part of the miniature. Leave it to dry until it’s smooth to the touch. [13]
    • If the primer is tacky when you touch it, it isn’t dry yet.

    Tip: If at all possible, spray the primer onto the miniature outdoors. Place it on a piece of cardboard and walk around it to spray it from every angle. This will keep paint from getting all over your stuff. If you have to work inside, try placing the miniature inside a large cardboard box so the sides will catch all the spare primer. [14]

  3. While you could use dozens of colors, most experts recommend just choosing a few for the main colors so that your miniature looks more cohesive in the end. You can add more detail with various colors, like red lips or green eyes, later on, if you want to. [15]
    • For example, royal blue, purple, and brown would go well together for a basic character.
    • Brown, dark green, and orange could work well for a warrior’s outfit.
    • Grays and black are good choices for any character that is wearing armor.
    • In the end, you can mimic something you’ve seen before or use your creativity to paint something completely original.
  4. Thin layers will also maintain the detail of the miniature. Gently dab your paintbrush into the paint, then wipe the sides of the brush against the bottle or a palette to remove excess paint. Use one color at a time and apply it everywhere it needs to go. [16]
    • It can help to put all the paint you’re going to use on a palette beforehand. This way, you won’t have to stop and open up bottles while you’re working.
  5. If you’re working in thin layers, it’ll just take a few minutes for the paint to dry. Each color may need 2-3 layers, just depending on how deep or bright you want it to be. [17]
    • Don’t forget to rinse your brushes between each color!
  6. You can purchase different shades and tones of washes from the same place you bought your paints. Use your dry brush to gently wipe the wash over your miniature, especially in areas where you want to create depth and shading, like on armor or a cloak. [18]
    • Washes are made to kind of seep into cracks and crevices. They won’t add much color to the body of your miniature, but they’ll make those cracks look darker. It’s a great way to make your miniature appear more dynamic.
  7. Small details can really help bring your character to life! What you add will be different for each miniature, but you may want to detail their eyes, mouth, shoes, sword, clothing, hair, or other aspects. [19]
    • For example, you could make the laces on their boots black or change the color of the hilt of a sword.
    • Don’t neglect the base of your miniature. For a classic look that’ll make the miniature pop, paint the rim of the base black. For a more eclectic style, choose a color that matches one of the character’s primary colors and use that to paint the rim.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I make resin molds?
    Mark Weiser
    Artist
    Mark Weiser is an Artist and Gallery Manager for DKW Art Gallery based in Marion, Iowa. He and his wife Deb manage the gallery, which boasts a variety of art, including paintings, ceramics, and photography. The gallery also provides art classes for the community, hosts shows, and runs events that build awareness of regional artists of all ages. Mark has also owned and operated art galleries in Florida and Georgia. He creates carved slate and wood pieces inspired by Irish and Celtic art, featuring the Gaelic language done in the ancient Ogham alphabet. Some of Mark's previous clients include CNN, Pinnacle Bank, and Collins Aerospace. He received a BS in Business Administration with minors in Education and Psychology from Emporia State University.
    Mark Weiser
    Artist
    Expert Answer
    You can make molds for resin out of materials like silicone, latex, polyurethane, or hot glue. Silicone is flexible and easy to use—just mix, pour over your object, and let it cure. Latex works well for intricate designs by brushing on thin layers. Polyurethane creates sturdy molds for larger items but is less flexible. While hot glue is simple, quick, and a budget friendly option.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Wear latex gloves while you’re assembling your miniature so you don’t get superglue on your hands. [20]
        Thanks
        Helpful 0 Not Helpful 0
      • Remember to rinse out your brushes at the end of each painting session. [21]
        Thanks
        Helpful 0 Not Helpful 0
      • There’s no need to drop a ton of money to get started painting miniatures. Visit your local art store and dollar store to search for paintbrushes, paints, and other supplies.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Work in a well-ventilated area while you’re cutting and filing your miniatures, as well as when you're spraying the primer. [22]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Face mask
      • Small bowl
      • Dish soap
      • Metal clippers
      • Hobby knife
      • Superglue
      • Filing knife
      • Toothbrush
      • Paper towels
      • Primer
      • Cardboard
      • Acrylic paint
      • Paintbrushes
      • Cup

      References

      1. ↑ https://youtu.be/gZXmDC5VS5U?t=319
      2. ↑ https://youtu.be/gZXmDC5VS5U?t=196
      3. ↑ https://youtu.be/ZA2wSe86DJU?t=257
      4. ↑ https://youtu.be/gZXmDC5VS5U?t=177
      5. ↑ https://youtu.be/gZXmDC5VS5U?t=246
      6. ↑ https://youtu.be/JzuEL3bhcn0?t=590
      7. ↑ https://youtu.be/gZXmDC5VS5U?t=305
      8. ↑ https://youtu.be/gZXmDC5VS5U?t=367
      9. ↑ http://www.how-to-paint-miniatures.com/how-remove-super-glue.html
      1. ↑ https://youtu.be/ZA2wSe86DJU?t=696
      2. ↑ https://youtu.be/zYIQi-M0es0?t=118
      3. ↑ https://youtu.be/JzuEL3bhcn0?t=408
      4. ↑ http://www.how-to-paint-miniatures.com/miniature-painting-apply-primer.html
      5. ↑ https://youtu.be/2AcJCWk4YqQ?t=442
      6. ↑ http://www.how-to-paint-miniatures.com/miniature-painting-color-scheme.html
      7. ↑ http://www.how-to-paint-miniatures.com/miniature_painting_washing.html
      8. ↑ http://www.how-to-paint-miniatures.com/miniature_painting_washing.html
      9. ↑ http://www.how-to-paint-miniatures.com/miniature_painting_washing.html
      10. ↑ https://youtu.be/JzuEL3bhcn0?t=886
      11. ↑ http://www.how-to-paint-miniatures.com/how-remove-super-glue.html
      12. ↑ https://youtu.be/JzuEL3bhcn0?t=907
      13. ↑ https://youtu.be/gZXmDC5VS5U?t=319

      About This Article

      Thanks to all authors for creating a page that has been read 27,189 times.

      Did this article help you?

      Advertisement