PDF download Download Article PDF download Download Article

Rain water collection barrels are an excellent way to save and conserve water for your garden and other non-potable uses. However, standing water can also be a breeding ground for disease-spreading mosquitos. Prevent mosquitos from breeding in your rain water collection barrel by using a deterrent, such as window screen material, vegetable oil, or mosquito dunk. There are also ways that you can maintain a mosquito-free barrel, such as by using rain water immediately, checking it for mosquito larva, and making repairs as needed. Clean your rain water barrel regularly as well to remove any mosquito eggs that end up in the barrel.

Method 1
Method 1 of 3:

Using Mosquito Deterrents

PDF download Download Article
  1. Mosquitos will get into your rain barrel and breed if there is nothing covering the openings. To prevent this, place a double layer over the top of the rain barrel and over any openings on the side, such as over the overflow port. [1]
    • You can also purchase mosquito-proof screen material in a hardware store, which is a special type of screen that is only 1 16  in (0.16 cm) thick.
    • If the rain water barrel is filled by a downspout coming from a roof, make sure to cover the top of the down spout with window screen material. Mosquitos can enter here as well.
  2. Cooking oil will coat the top of the water and prevent any larvae that get into the barrel from getting oxygen. This will suffocate them and cause them to die. [2] A thin layer of vegetable oil will not have a negative effect on any plants you water with the rain water either. [3]
    • You will only need 1 8  in (0.32 cm) of oil at the top of the barrel for this to be effective.
    Advertisement
  3. Mosquito dunk, or Bacillus thuringiensis israelensis (Bti), is a commercially available product that you can add to your rain water barrel. [4] This product is safe to use in rain barrels. It’s made from a naturally occurring soil bacteria that kills any larvae that end up in the water. [5]
    • Make sure to follow the manufacturer’s instructions for how much of the product to add to your rain water barrel and how often to use it.

    Warning : Rain water is not safe for human consumption, so do not drink the rain water even if it is free from mosquitos. [6]

  4. Advertisement
Method 2
Method 2 of 3:

Maintaining a Mosquito-Free Barrel

PDF download Download Article
  1. Don’t allow the water to sit for more than 1 week after it rains. This is the average amount of time that it takes for eggs to develop into mosquitos in warm weather, and once this happens it can be very difficult to control the mosquitos. [7]
    • If you need to store the rain water for longer than 72 hours, cover the barrel with a tight-fitting lid.
    • You may also want to use another deterrent to prevent mosquitos from breeding if you cannot use the water right away, such as mosquito dunk or vegetable oil.

    Tip : Some rain water barrels have decorative tops where water may pool. Dump this water immediately to prevent mosquitos from breeding in it.

  2. Mosquito larvae will be easily visible against a white backdrop so scoop a cup of the water out of the barrel daily and inspect it. You will see black or brown squiggly lines if larva are present or C-shaped brown or black shapes if there are pupae in the water. [8]
    • Repeat this once per day after collecting water in the rain barrel.
  3. If the barrel is infested, dump it immediately or the mosquitos will continue to grow and breed. Do not allow animals to drink this water or use it to water a vegetable garden. Dump it into a field or other space away from where humans and animals are present. [9]
    • Try using the water on a patch of well-draining soil well away from your home, people, and animals.
  4. If any of the fittings are loose or broken, fix them immediately. These loose fittings could serve as entry points for mosquitos. Tighten any loose screws or replace fittings completely if they are not fixable. [10]
    • Make sure to check the screen for any cuts, holes, or tears where mosquitos might enter the rain barrel and repair the screen right away. You can patch smaller holes with extra screen material, but larger tears might require a totally new piece of screen.
  5. Advertisement
Method 3
Method 3 of 3:

Cleaning and Storing the Barrel

PDF download Download Article
  1. Pour 2 to 3 US gal (7.6 to 11.4 L) of warm water and 1 4   c (59 mL) of dish soap into the rain water barrel after you empty it. Then, scrub the inside of the barrel with an abrasive sponge and rinse the barrel thoroughly with clean water. [11]
    • This will remove any mosquito eggs that may be attached to the sides of the barrel.
    • Try to clean the barrel this way at least once per month while your rain water barrel is in use or any time you detect an infestation.
  2. Combine 1 4   c (59 mL) of bleach with 1 US gal (3.8 L) of water and swish it around inside the rain water barrel. Ensure that the bleach solution gets over all of the surfaces inside of the barrel and then dump out the excess. [12]
    • This will disinfect the barrel and help to kill any bacteria that mosquitos or their larvae might feed on.
    • Sanitize the inside of the rain water barrel in this way every time after scrubbing out the inside of it.
  3. After you have thoroughly cleaned and sanitized the barrel and you no longer need it for collecting rain water, turn it upside down. Store the barrel in a shed, garage, or other indoor location until you need it again. [13]
    • This will prevent mosquitos from getting into the barrel and infesting it while it is not in use.

    Tip : Make sure that you close any valves on the rain water barrel while it is not in use. This will also help to prevent mosquitos from getting into the barrel.

  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You’ll Need

      Using Mosquito Deterrents

      • Window screen material
      • Tools for repairing rain barrel
      • Vegetable oil
      • Mosquito dunk

      Maintaining a Mosquito-Free Barrel

      • White cup

      Cleaning and Storing the Barrel

      • Abrasive sponge or scrub brush
      • Dish soap
      • Bleach
      • Water
      • Bucket
      • Measuring cups

      About This Article

      Article Summary X

      To prevent mosquitos from breeding in your rain barrels, try using mosquito deterrents and not storing water in them for too long. Place a double layer of window screen material over the top of each barrel, making sure it also covers the overflow hole so insects can’t get in. You can also pour 1 to 2 cups of cooking oil into the water. The oil will collect on top and prevent any larvae from getting oxygen, causing them to die. If you want to stop mosquito larvae from hatching, try using mosquito dunk, which is a safe, natural bacteria that kills mosquitos. Just follow the manufacturer's instructions to add the correct amount to your barrel. Try to use the water in your barrel within a week after it rains so insects don’t have time to breed. Remember to fix any loose fittings on your barrel, since they could enable mosquitos to get into the water. For tips on what to do if your barrel is infested, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 73,064 times.

      Reader Success Stories

      • Betsy Wilson

        Aug 3, 2021

        "Gave me a better idea than chemicals. Will try both ideas... oil and see if it works. If not, the soap. Thanks."
      Share your story

      Did this article help you?

      Advertisement