How to Put Anchor Screws in a Wall

PDF download Download Article
PDF download Download Article

Anchor screws allow you to hang heavier items on your walls or hang items where there is no wall stud to support the nail. When they're installed correctly, anchor screws can support pieces that weigh up to 70-pounds, so they're great for heavy frames, paintings, and mirrors. To put anchor screws into your wall, you need to select the proper anchor and then install it in the location you've selected to hang your item.

How to Put a Screw In with an Anchor

Weigh your item before hanging it to ensure you choose an anchor with enough weight allowance. Then, choose a proper anchor for your wall material based on whether it’s plaster, drywall, concrete, or brick. Use a drill to drive a pilot hole into the spot where you insert the anchor in the wall by hand.

Method 1
Method 1 of 4:

Selecting the Proper Anchor

PDF download Download Article
  1. What is it made out of? Different types of walls will require different types of anchors and may require a different installation process.
    • Plaster walls begin as wooden frames that have been constructed from narrow strips of wood cut from a lathe. These frames are then coated with several layers of plaster until the desired density is achieved. Plaster wall was the standard during the early 1900s. [1]
    • Drywall is made from a plaster sheet that has been sandwiched between paper. Drywall became popular in the United States and Canada during the late 1950s as a lighter-weight replacement to plaster wall. [2]
    • Brick and mortar, and concrete walls are also common.
  2. This is the second most important factor to consider when selecting the proper type of wall anchor.
    • Cabinets, because of the way that they hang, put more stress on an anchor. It is therefore not recommended to hang a cabinet with an anchor. Depending on the size of the cabinet, you may find a smaller piece that will work with an anchor.
    Advertisement
  3. The angle that you will be installing the anchor and the weight of the object being hung will affect which type of anchor you should use. The amount of stress on an anchor affects how much it can support.
  4. This can only be done if you know ahead of time what type of material the anchor will be screwed into, the approximate weight of the object being hung, and angle of the anchor (as in the case of a ceiling).
    • Plaster wall: anything under 20-pounds can be hung with a plastic expansion anchor . Use a molly bolt for anything weighing more than 20-pounds.
    • Drywall: use a threaded anchor screw for anything weighing less than 20-pounds. Anything weighing more should be anchored with a molly bolt . Hanging anything more than a few pounds--such as a smoke detector--is not recommended on drywall ceilings.
    • Concrete or brick and mortar walls require expansion anchors . Be sure never to install any anchors in-between seams of concrete or brick. Anchors should only be installed in the brick or stone itself, ever in the grout. The amount of weight that the anchor can hold will be determined by the strength and condition of the wall itself (e.g., old brick and mortar walls that are in poor condition tend to be brittle and can crumble; this directly impacts how much weight an anchor can support).
    5. Advertisement
Method 2
Method 2 of 4:

Installing an Expansion Anchor

PDF download Download Article
  1. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
  2. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Use a level to measure the spot for your second anchor. Make another small pencil mark where the second anchor will be installed.
    • You can also apply a bit of grease or lipstick on the hooks of the item you will hang. Place the item where you want it on the wall and gently press it against the wall. The grease or lipstick will leave a mark to show you where to install your anchors.
  3. Be sure that you hold the drill perpendicular to the wall so that the anchor will sit parallel to the ground: an anchor that is not installed straight will not be able to support as much weight. You should drill a hole that is approximately the same size as the anchor itself (the screw will force it to expand outward). [3]
    • Make sure the hole you drill is deeper than the anchor is long.
  4. If the hole is too small, the anchor will collapse onto itself and may not install properly. Push it in until the anchor sits flush against the wall. Do not bang on the screw because it could bend or break.
    • If needed, tap the anchor with a rubber mallet lightly to get it to sit flush against the surface of the wall.
  5. Line up the screw and the anchor and, using either a philips or flat head screwdriver, turn the screw clockwise just until the base of the screw comes to rest against the base of the anchor.
    • If the object you are hanging has a mounting bracket, you may need to slide the screw through the bracket before screwing it into the anchor.
  6. Be sure to leave just-enough of the screw exposed to "catch" the hanger on the back of picture frame or mirror. A good rule of thumb is to leave about a 1/4" of screw exposed for hanging.
    7. Advertisement
Method 3
Method 3 of 4:

Installing a Threaded Anchor Screw

PDF download Download Article
  1. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
    • Threaded anchor screws are mostly used in drywall.
  2. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Make another small pencil mark where the second-anchor will be installed (in-line with the previous mark, spaced the same distance as the hooks on the picture farm or mirror).
  3. Because these anchors are self-threaded you do not need to pre-drill any holes. [4]
    • Although this is not absolutely necessary, you can use a nail to make a tiny indention on your mark. This indentations will hold the tip of the anchor as you begin screwing it into the wall.
  4. You will have to use a drill to install the anchor. Be sure to hold the screwdriver or drill perpendicular to the wall to ensure that the anchor is installed perfectly straight.
    • Clockwise is "in."
    • Make sure you are applying enough pressure to allow the threads to catch. Otherwise, the tip of the anchor will keep spinning in place. [5]
    • Screw the anchor in until it rests flush against the wall.
  5. Line up the screw and the anchor and, using either a philips or flat head screwdriver, turn the screw clockwise just until the base of the screw comes to rest against the base of the anchor.
    • If the object you are hanging has a mounting bracket, you may need to slide the screw through the bracket before screwing it into the anchor.
  6. Be sure to leave just-enough of the screw exposed to "catch" the hanger on the back of picture frame or mirror.
    7. Advertisement



Method 4
Method 4 of 4:

Installing a Molly Bolt

PDF download Download Article
  1. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
  2. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Make another small pencil mark where the second-anchor will be installed (in-line with the previous mark, spaced the same distance as the hooks on the picture farm or mirror).
  3. The hole should be slightly larger than the molly bolt. You can measure it by folding the wings and measuring its width. As the molly bolt is screwed in its wings will compress and create tension, filling any gap. [6] Be sure that you hold the drill perpendicular to the wall so that the anchor is installed perfectly straight. All wall anchors should be installed parallel to the ground.
    • Make sure you hole you drill is deeper than the anchor is long.
  4. Unlike the other two types of anchors, which require the anchor and the support screw to be installed separately, the molly bolt and screw are installed at the same time. Prepare the molly bolt by screwing the support screw into the winged-bolt.
  5. Be sure to hold the screwdriver perpendicular to the wall as you are turning it clockwise. This will help ensure that the anchor is installed perfectly straight.
    • Since the hole you drilled earlier is larger than the molly bolt, you should not have to use a drill. [7]
    • Don't over tighten, the molly bolt will flare as you screw it into the wall. [8] Just make sure that it is snug.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I calculate the anchor bolt capacity for a wall mounted object?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Mark Spelman
    Construction Professional
    Expert Answer
    The anchor bolt will state the maximum weight that it can hold, so check the product's packaging before installing it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 7
  • Question
    I asked my guy who installed a mantel on my brick veneer fireplace how to install a mirror and he said buy so anchors; what are so anchors?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Mark Spelman
    Construction Professional
    Expert Answer
    In this instance, I would recommend using a hollow anchor to install a mirror.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
  • Question
    How do I apply anchored screws into the wall
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Mark Spelman
    Construction Professional
    Expert Answer
    Follow the directions above and make sure that you don't over-tighten the anchored screws.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 11
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • When adding an anchor to drywall, you don't need the drill & bit. All you need to do is screw the screw into the drywall (slowly, so as not to go crooked & making the hole wider than needed), and then back it out, then tap in your anchor, and insert the screw into the anchor.
        Thanks
        Helpful 6 Not Helpful 1
      • If a metal anchor is too long and won't drill into the drywall flush, drill the hole initially and then snap off the teeth at the end of anchor with a pair of pliers. This should give you some more room.
        Thanks
        Helpful 77 Not Helpful 63
      • To fasten an anchor in stone or cement, carve small wooden wedges and pound them into the drilled hole.
        Thanks
        Helpful 1 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Make sure you're not drilling directly above an outlet, switch, or back side of a plumbing pipe. While drilling, if you hit a metal plate, that is an indication not to go any further (as it usually covers electrical work or plumbing).
        Thanks
        Helpful 32 Not Helpful 18
      • When drilling into concrete you need to use a hammer drill.
        Thanks
        Helpful 26 Not Helpful 28
      • If the item is really heavy, you may want to use butterfly nuts instead.
        Thanks
        Helpful 25 Not Helpful 27
      • If the item is really light, it can be hung on small nails & poster can be hung with stick pins. You can also find double-sided tape that can work for small items.
        Thanks
        Helpful 2 Not Helpful 0
      • If the picture, etc. to be hung is heavy, do NOT use the curled hooks shown, which are mainly for hanging lightweight coffee mugs. Instead, use one or two special picture hooks. These hooks are shaped so that the screw is angled downward to better resist breaking off under the weight. In this case, the insert sleeve hole must also be drilled at the same angle.
        Thanks
        Helpful 2 Not Helpful 0
      • Be sure to use round head screws, and not flat head type.
        Thanks
        Helpful 22 Not Helpful 27
      Advertisement

      Things You'll Need

      • Screws
      • Anchors
      • Drill & bit (see "Tips")
      • Hammer or rubber mallet
      • Pencil
      • Level
      • Tape measure
      • Safety glasses

      You Might Also Like

      How to
      Hang a Heavy Picture
      How to
      Make a DIY Wooden Bed Frame
      How to
      Drill Into Concrete
      10 Different Ways to Get a Stripped Screw Out
      10 Ways to Remove a Stuck Screw
      How to
      Remove a Stripped Allen Screw
      How to
      Measure Screw Size
      How to
      Unscrew a Screw Without a Screwdriver
      How to
      Remove a Screw without a Head
      The Best Way to Use a Screw Extractor
      How to
      Use a Rawlplug
      How to
      Read a Screw Thread Callout
      How to
      Fix a Loose Screw That Won’t Tighten in Wood
      How to
      Replace a Ceiling Fan Pull Chain Switch
      Advertisement

      References

      1. ↑ https://home.howstuffworks.com/drywall-vs-plaster.htm
      2. ↑ https://home.howstuffworks.com/drywall-vs-plaster.htm
      3. ↑ https://www.thisoldhouse.com/toh/article/0,,203389,00.html
      4. ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
      5. ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
      6. ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
      7. ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
      8. ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
      9. Videos provided by Ultimate Handyman

      About This Article

      Article Summary X

      Before you put an anchor screw in a wall, find out what the wall is made of and how heavy the item you plan to hang is so you know which type of anchor to use. Choose an expansion anchor if you have a plaster wall and want to hang something less than 20 pounds. To install the anchor, drill a hole in the wall that's deeper than the anchor is long, then slide the expansion anchor into the hole. Finish by screwing the support screw into the anchor, but remember to leave enough of the screw exposed to hang your picture frame on. To find out how to install a threaded anchor or molly bolt, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,513,391 times.

      Reader Success Stories

      • Kay Elemeno

        Jul 25, 2016

        "Very helpful because it doesn't assume that you already have experience with the items and techniques used. ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement