How to Put Varnish on Acrylic Painting

Co-authored by Jeanine Hattas Wilson

Last Updated: October 28, 2024 References

After painting a new piece, you may wonder how to best protect it from sunlight, dust, and scratches. Varnish creates a protective cover that can also provide a nice shine to make the colors in your painting appear even more vibrant. Depending on your style, there are several different finishes you could choose, from a subdued matte to a high gloss. Because you have to wait for the paint to dry, as well as giving each coat several hours to cure, this project may take you several days to complete.

Part 1

Part 1 of 3:

Choosing a Varnish

Download Article

1
Use a gloss varnish for a high shine that makes colors more vibrant. Gloss varnishes are very popular as they provide a strong, clear, shiny protective coating. If you want the colors of your painting to pop even more than they already do, this is a great choice. ^{[1]
X
Research source}
- If you use a gloss varnish and decide after the first coat that you don’t like it, you can easily switch to matte or satin for the second coat.
2
Apply a matte varnish for a subdued coating that softens the paint colors. Matte varnish is a popular choice when you don’t want a shiny finish on your painting. It can make darker colors look lighter and dries with a flat-finish, meaning that there is no sheen. ^{[2]
X
Research source}
- If your painting contains very subtle differences between shades of color, this may not be the best option. The matte varnish could make it harder to distinguish between those subtleties.
Advertisement
3
Choose a satin varnish for a coating that is between gloss and matte. If you like the idea of a little bit of shine but don’t want a high-gloss finish, a satin varnish may give you exactly what you want. It will still soften the colors a little bit, but it will also create a semi-glossy finish. ^{[3]
X
Research source}
- Just like with matte varnish, satin may make some shades of colors harder to distinguish from each other, especially if they were very similar to begin with.
4
Get a water-based varnish for a non-toxic, easy-to-remove option. These varnishes contain ultra-violet light stabilizers (UVLS), which help protect your painting from damage or fading due to exposure to sunlight. ^{[4]
X
Expert Source

Jeanine Hattas Wilson
Professional Painter

Expert Interview. 11 May 2021.} They can be cleaned up with soap and water, and they’re much easier to remove from a painting if you ever decide you want to make changes to it. ^{[5]
X
Research source}
- As long as your painting is completely dry before you apply the varnish, there should be no risk of the paint getting smeared or being lifted off the canvas with a water-based option. ^{[6]
  X
  Expert Source
  
  Jeanine Hattas Wilson
  Professional Painter
  
  Expert Interview. 11 May 2021.}
5
Choose a solvent-based varnish for a super glossy finish for your painting. The fumes from solvent-based varnishes are toxic, so you’ll need to have access to a well-ventilated area while working with it. They’re thus named because they need to be thinned with a solvent before being applied, and you’ll need mineral spirits to clean your brushes. ^{[7]
X
Research source}
- These are also often referred to as MSA (mineral spirit acrylic) varnishes.
- If you do choose a solvent-based varnish, you’ll want to test your painting for a solvency reaction before coating the entire thing.
Doing a Solvent-Sensitivity Test: Apply the solvent (usually rubbing alcohol, turpentine, or some type of mineral spirits) to a cotton swab and dab it along the edge of the painting. Check the swab to see if any paint came away. If paint came up, use either a spray version of the varnish or switch to a water-based one.
6
Opt for a spray varnish if your painting has different textures. Spray varnishes are great to use on paintings that have uneven surfaces, which can happen due to different styles and methods of painting. It allows you to coat the painting without disturbing the surface with a paintbrush. ^{[8]
X
Research source}
- Make sure to work in a well-ventilated area and spray the varnish away from you onto the canvas if you choose this option.

Part 2

Part 2 of 3:

Applying an Isolation Coat

Download Article

1
Let the paint dry for at least 1 week before applying the isolation coat. An isolation coat provides a thin barrier between the paint and the varnish. It becomes very important if you ever decide to remove the varnish to modify your painting. It also serves as a sealant for any areas of the canvas that may still be absorbent. ^{[9]
X
Research source}
- Don’t use an isolation coat if your painting contains water-soluble materials, like paper.
- Don’t use an isolation coat if you used metallic leaf in your painting.
2
Mix a 2:1 ration of soft gel and water to create the isolation coat. Soft gel is a type of gloss you can purchase at your local craft store. This is a separate product from the varnish. Start with 2 tablespoons (30 mL) of gel and 1 tablespoon (15 mL) of water and add more if you start to run out. Mix the water and gel very gently with a spoon in a small bowl. ^{[10]
X
Research source}
- If you mix the water and gel too vigorously, bubbles might appear. Bubbles will affect the finish of the isolation coat when it dries. Rather than trying to salvage it, start over and stir the mixture more gently.
- Applying an isolation coat will give your painting a slight sheen, but that will be covered up very easily if you’re using a matte varnish.
- Some brands sell ready-to-use isolation coats that don’t require any mixing.
3
Brush the painting with a dry paintbrush to remove lint or dust. Before applying the isolation coat, gently run a wide, dry paintbrush over the surface of the painting. This will remove any hairs, dust, or dirt and keep them from getting caught in the isolation coat. ^{[11]
X
Research source}
- Make sure the brush itself isn’t dusty. It’s best to use a new one or one that has been cleaned and dried thoroughly.
4
Apply a thin, even coat over the surface of the painting. Dip the tip of a wide paintbrush into the soft gel mixture. Start in the middle of the painting and spread the coat out to the edges to cover the entire surface area. Then go back and use long even brush strokes from side to side to smooth out the coating. ^{[12]
X
Research source}
- Go around the edges of the painting and clean up any drippings with the paintbrush.
5
Let the isolation coat dry for 24 hours. The painting will be dry to the touch after about 30 minutes, but it’s recommended that you wait an entire day before applying the varnish. Leave it laying flat somewhere it won’t be in the way of pets, children, or other disturbances. ^{[13]
X
Research source}
- It won’t hurt the painting if you leave it for longer than 24 hours before moving on to varnishing.

Part 3

Part 3 of 3:

Adding Layers of Varnish

Download Article

1
Position the painting on a flat surface. You shouldn’t varnish a painting while it’s propped up on an easel or hanging on a wall, as the varnish will run off the canvas. Lay old newspaper underneath the canvas to catch any drips. ^{[14]
X
Research source}
- If the painting is too big or if you don’t have a table available, you could always set it on the floor. Just make sure it’s somewhere out of the way so it won’t get stepped on.
Using Spray Varnish: Set the painting vertically for spray varnish. Shake the can well, and then spray the painting evenly from left to right and then right to left, all the way down to the bottom of the canvas. Wait 5-7 minutes between the first coat and second coat and always work in a well-ventilated area.
2
Prepare the varnish by following the manufacturer’s instructions. Depending on what kind of varnish you decided to use, you may need to dilute it with water or a solvent. Pour the varnish into a shallow container so it’s easy to dip your paintbrush into it. ^{[15]
X
Research source}
- Some varnishes don’t need to be mixed with anything else, so check the back of the bottle or container before doing anything.
3
Test the varnish on the painting to see how it alters the colors. In most cases, the varnish will either amplify the colors you used by adding a layer of gloss, or they may mute them slightly if you’re using a matte finish. Apply the varnish to a small, inconspicuous part of the painting and let it dry for about 10 minutes to make sure it doesn’t alter your painting in an undesirable way. ^{[16]
X
Research source}
- If the sides of your canvas are painted, you could always test the varnish there so you don’t add any varnish to the actual painting yet.
4
Use a wide paintbrush to apply the first thin coat of varnish. Dip about 1/3 of the brush into the varnish, then start brushing it onto the canvas from the center of the painting. Spread it evenly from side to side using long, even strokes. Try to follow the same brushstrokes you used when applying the isolation coat. ^{[17]
X
Expert Source

Jeanine Hattas Wilson
Professional Painter

Expert Interview. 11 May 2021.}
- Continue dipping your paintbrush into the varnish as the bristles become dry.
5
Even out the brushstrokes before the first layer of varnish dries. After coating the surface area with varnish, go back and brush long, even strokes either from side to side or from top to bottom. Make sure the layer of varnish is as even as possible. ^{[18]
X
Research source}
- If you notice small bubbles forming in the varnish, use just the tip of your paintbrush to make long strokes from side to side to pop them before the varnish dries.
- Sometimes tilting the painting from side to side can help you see if there are areas that you missed or that are over-saturated with the varnish.
6
Wait 3-6 hours to let the varnish cure before doing your second coat. Varnish dries pretty quickly but will give better results if it has several hours to dry between each application. Apply the second coat the same way you did the first coat. ^{[19]
X
Research source}
- Check the instructions on your varnish to see if there are specific curing guidelines.
- Most acrylic paintings need just 2 coats of varnish, but if the varnish looks uneven in some sections after it has dried, apply a third coat. Sometimes if each coat is very thin, it may not evenly cover the entire canvas. ^{[20]
  X
  Expert Source
  
  Jeanine Hattas Wilson
  Professional Painter
  
  Expert Interview. 11 May 2021.}
7
Let the painting cure for 1-2 weeks before moving it or hanging it up. The varnish may feel dry to the touch soon after it was applied, but it takes time for it to completely dry and adhere to the paint. Keep the painting somewhere safe from disturbances during the curing process. ^{[21]
X
Research source}
- Place the painting against the wall or on an easel with the painting facing the wall or easel to protect it from getting dust or hairs on it.

Expert Q&A

Search

Add New Question

Question

How many coats of varnish should you put on an acrylic painting?

Jeanine Hattas Wilson
Professional Painter
Jeanine Hattas Wilson is a Professional Painter and the President of Hattas Public Murals, Inc. With nearly 20 years of experience, Jeanine specializes in creating, overseeing, designing, and painting murals. Jeanine holds a BA in Advertising from Marquette University and a Studio Painting Minor from The Milwaukee Institute of Art & Design. She has studied at The Atelier Artien in Paris, France, Los Angeles Academy of Figurative Art, and under renowned artists such as Robert Liberace, Michael Siegel, and William Cochran. To date, Hattas Public Murals has painted nearly 5,000 commissioned works of art in homes and commercial and public spaces.

Jeanine Hattas Wilson

Professional Painter

Expert Answer

Two coats of varnish are usually enough for an acrylic painting. Be sure to apply the varnish in thin coats, and wait for each coat to dry before applying another.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 162 Helpful 166
Question

What happens if you shake varnish?

Jeanine Hattas Wilson
Professional Painter
Jeanine Hattas Wilson is a Professional Painter and the President of Hattas Public Murals, Inc. With nearly 20 years of experience, Jeanine specializes in creating, overseeing, designing, and painting murals. Jeanine holds a BA in Advertising from Marquette University and a Studio Painting Minor from The Milwaukee Institute of Art & Design. She has studied at The Atelier Artien in Paris, France, Los Angeles Academy of Figurative Art, and under renowned artists such as Robert Liberace, Michael Siegel, and William Cochran. To date, Hattas Public Murals has painted nearly 5,000 commissioned works of art in homes and commercial and public spaces.

Jeanine Hattas Wilson

Professional Painter

Expert Answer

You'll create bubbles in the varnish that will harden onto the surface of your acrylic painting. With this in mind, it's never a good idea to shake your varnish.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 151 Helpful 162
Question

Does varnish or paint dry faster?

Jeanine Hattas Wilson
Professional Painter
Jeanine Hattas Wilson is a Professional Painter and the President of Hattas Public Murals, Inc. With nearly 20 years of experience, Jeanine specializes in creating, overseeing, designing, and painting murals. Jeanine holds a BA in Advertising from Marquette University and a Studio Painting Minor from The Milwaukee Institute of Art & Design. She has studied at The Atelier Artien in Paris, France, Los Angeles Academy of Figurative Art, and under renowned artists such as Robert Liberace, Michael Siegel, and William Cochran. To date, Hattas Public Murals has painted nearly 5,000 commissioned works of art in homes and commercial and public spaces.

Jeanine Hattas Wilson

Professional Painter

Expert Answer

Varnish dries a lot faster than acrylic paint. Because of this, you should never apply varnish to a painting that isn't fully dry.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 158 Helpful 131

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Place a box over the painting while the varnish dries if you have pets. The box will keep any hair or dander from settling onto the painting. ^{[22]
X
Research source}

Thanks
Helpful 13 Not Helpful 22
If you’re uncertain of what brand to buy, read reviews on art blogs and customer reviews online to help inform your decision. ^{[23]
X
Research source}

Thanks
Helpful 17 Not Helpful 17

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Make sure to work in a well-ventilated area if you’re using a solvent-based varnish or spray varnish. ^{[24]
X
Research source}

Thanks
Helpful 23 Not Helpful 22
Keep your painting out of reach of pets and children, as some of the varnishes may be toxic. ^{[25]
X
Research source}

Thanks
Helpful 14 Not Helpful 14

Things You’ll Need

Applying an Isolation Coat

Soft-gel gloss
Water
Spoon
Small bowl
Dry paintbrush
Paper towels

Adding Layers of Varnish

Varnish
Small bowl
Paintbrush
Paper towels
Newspapers

[1]

[2]

[3]

[4]

Expert Source

Jeanine Hattas Wilson
Professional Painter

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

Log in

How to Put Varnish on Acrylic Painting

Steps

Choosing a Varnish

Applying an Isolation Coat

Adding Layers of Varnish

Expert Q&A

Tips

Warnings

Things You’ll Need

Applying an Isolation Coat

Adding Layers of Varnish

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories