What Kind of Reality Check Do I Need Quiz
Q&A for How to Hang a Picture
Coming soon
Search
-
QuestionShould window or door molding be considered when centering a picture vertically?Community AnswerYes, it generally should. You want to make sure that the picture is at the right height, but more importantly, use the molding as a reference so that the picture is not crooked.
-
QuestionHow far down the frame should I position the hanging wire screws?Community AnswerThere's no exact answer to this. It depends on the length of the wire you use. You can position the screws near the top or closer to the middle, placed on the sides of the back of the frame. The key is this: decide whether or not you want the wires to show above the frame (they're usually not visible). Put the screws in place on the frame, measure how much wire you need, allow for some stretch, then fasten the wire to the frame.
-
QuestionHow high on the wall should a picture be hung?Community AnswerThis is subjective to your taste but most people opt for about eye level.
-
QuestionDo you hang the picture in the center of the wall, or center it by the furniture placement?Decor42Community AnswerThat depends on your decorating style. Those that like traditional/transitional style decorating choose to hang their picture centered on the wall with balance on each side, matching or coordinating (symmetrical). For those that like modern, eclectic decorating tend to off set the main piece, non-matching or non-coordinating with off-balance pieces on the sides (asymmetrical).
-
QuestionHow can I hang a picture when I can't put a hole in the wall?Community AnswerTry using the 3M Command Strips. They are easy to use and won't damage your walls.
-
QuestionHow do I hang a large picture on a concrete wall?Community AnswerYou will need to go to your local hardware store and look for concrete screws. Use these just like nails and hang up your photo as usual.
-
QuestionHow do you get the wire in the hook?Community AnswerI personally suggest using some Artistic Wire (which you can get from your local craftstore), and either tie it, or put it through.
-
QuestionHow do I find the stud?Community AnswerPurchase a stud finder. They are available at your local hardware store, or from an online retailer like Amazon, eBay, etc.
-
QuestionHow do I choose the right drill bit size?Hannah MaddenCommunity AnswerIf you're drilling a screw into the wall, choose a bit that's as large as the screw itself. If you're pre-drilling a hole into the wall for an anchor, choose a bit that's 1/64" larger than the anchor.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit