How to Tell if a Diamond is Real
Q&A for How to Install a Hot Tub
Coming soon
Search
-
QuestionCan a hot tub go on a raised wooden deck?Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices.You'll have to consult a structural engineer to be sure. Let's say you want to put a 200 lb (90.7 kg) hot tub that's 8 by 8 ft (2.4 by 2.4 m) and 3.5 ft deep (1.1 m) on your existing deck. That would give you 1,680 gallons (6,359.5 L) of water, which weighs 14,000 lb (6,350 kg). Instead of dealing with 200 lb (90.7 kg), you'd actually be dealing with 14,200 lb (6,441 kg)—that's why it's so important to consult with a structural engineer.
-
QuestionHow do I drain the water in a hot tub?Community AnswerInvest in a water vacuum. They drain water and can always be stored for emergency situations such as a burst pipe.
-
QuestionWhat is a whip on electrical installation?Community AnswerBasically it's a power cord without the plug that will be hardwired into a circuit box instead of being plugged into an outlet.
-
QuestionWhere do I put the hose after the tub is full?Community AnswerPut it away wherever you normally store the hose.
-
QuestionHow do I install a filter?Community AnswerRefer to the owner's manual, every brand and model is different. Typically a filter can be found under a cover located in the body of your self-contained hot tub. A screw style plastic nut is used to hold the filter/filters in place.
-
QuestionWill I need a plug to install my jacuzzi?Community AnswerYes, you will need a plug to install your hot tub.
-
QuestionIf my power cord on the hot tub is not long enough to reach the electrical socket to plug it in, what can I do?Community AnswerUse an outdoor extension cord.
-
QuestionHow do I wire my hot tub and make sure I have enough amperage?Community AnswerThe hot tub manual should specify a recommended OCPD (overcurrent protection device) amperage. (To be safe, the OCPD must be GFCI-protected.) The manual should also help you select the wire size, based on the amperage and insulation used. If you're still unsure, consult your local building department.
-
QuestionWhat are the building codes for how far my hot tub needs to be from the home in Wisconsin?Community AnswerThe hot tub can be wherever you want, as long as its base is properly supported. The bigger problem is the outside breaker box, which in most states must be 6 feet from the spa.
-
QuestionDoes the patio have to be perfectly level or on a slight slope where the hot tub is being installed, or are there leveling feet on the hot tub?Community AnswerThere are no leveling feet on the hot tub. All directions and other people will tell you to have it level. It is no good to pay several thousands of dollars for a hot tub if the patio/or surface is not level. Take the time and or money to do it correctly.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit