What Kind of Reality Check Do I Need Quiz
Q&A for How to Make a Faraday Cage
Coming soon
Search
-
QuestionWould copper pots, washtub boilers, etc. make a good Faraday cage?Community AnswerSo long as the containers are conductive and can seal properly, those should work pretty well. These would be able to protect small electronics such as cell phones and the like.
-
QuestionCan I make a Faraday cage for a car's motor?Mick JohnsonCommunity AnswerYou can, but you are then speaking about mothballing a car because all of the sensitive electronic components need protected. You may wish to look at a bicycle motor if you are mechanically inclined, or perhaps an old, old car or surplus jeep: no electronics. A Model T replica, or an actual, maybe a Willy's or something. Heck a golf cart with a lawn mower engine might be what you like best, or you might just be better off with a horse or a good mule because they can thread their way through the throngs of cars that were turned into boulders. Best wishes either way!
-
QuestionTo make a trashcan Faraday cage, would galvanized cans work the same?Community AnswerYes, any conductive metal will work. Silver is the best choice, but very expensive.
-
QuestionI want to build a Faraday cage for a portable generator. Can you give me some tips?Community AnswerYou would have to disconnect the generator completely and make sure no cables are outside of the cage, then take a large metal trash can and coat the inside with plastic. There is no need to wrap the generator in plastic as long as there are layers of plastic and metal completely encasing it from the outside. It must be completely airtight to avoid empty exposure.
-
QuestionCould I just use a normal plastic trash bag instead of plastic wrap?Mick JohnsonCommunity AnswerYes. The key is that it is sturdy enough, if your conductive material punches a hole through your insulating layer you will be making an antenna instead. Remember that most devices run on micro volts and an EMP can subject these to thousands of volts in load equivalent amperage.
-
QuestionIf I am inside my car with my cell phone and iPad, are they protected, or would they still need to be wrapped in foil?Community AnswerYour car does not act as a Faraday cage. It does not block signals.
-
QuestionWould I be able to build a cage for a stand by 3/phase generator and transfer switch?Community AnswerFor a large scale object like that, it might be best to build a sort of structure or cube using a brass or bronze screening or mesh. Build it using 2x4s for the frame, then staple the mesh around all sides and along the bottom. Alternating layers with plastic sheathing between mesh would even be better but the plastic would not allow airflow, so obviously you wouldn't want to run fuel burning generator inside of it for very long, as it would kill you if you were to be overcome by the fumes.
-
QuestionCan I put a Faraday Cage around my phone and still use it?Community AnswerThat depends on what you mean by "use it". You might be able to successfully operate the on/off button but the capacitive touch screen will not work while appropriately wrapped and the sound would be seriously muffled at best.
-
QuestionWill making a giant capacitor have any effect on protecting my electronic device?Community AnswerNo, it won't cause a capacitor is also an electronic device and it won't store any induced current from an EMP. So, it will be fried too.
-
QuestionCan I make a wooden drawer into a Faraday cage if I line it with foil, plastic film and fabric?Community AnswerYes, because you would have turned something made of wood into something made with something metal.
-
QuestionCan I use paintable rubber and a 40-foot cargo container as a protective room?Community AnswerIf you can ensure that is is airtight and doesn't have any leaks or exposed metal, yes.
-
QuestionHow would a Faraday cage need to be built to protect a handheld GPS?Michael RileyCommunity AnswerThe same as the instructions above. Wrap it in a plastic bag, then wrap it with foil. The more alternating layers, the more protection. If you have 3 to 5 alternating layers, you shouldn't have to worry about too much.
-
QuestionCan I make a protection for my iPhone with an aluminum pan (one that came with a meal) by turning it upside down over my iPhone with a straight piece of aluminum foil on the bottom?Minecraft TanCommunity AnswerIt is not enough to insulate your phone from the EMP waves. It is best to place your device in a plastic bag and wrap it with aluminium foil for extra protection.
-
QuestionHow long would your items need to stay in the Faraday cage if there is an EMP?Minecraft TanCommunity AnswerAfter the EMP blast, leave the items there for 24 hours or more, till there are no more signs of another EMP triggered bomb or EMP waves. Then you are clear to use it.
-
QuestionWould an EMP blast only come from above, so that only a roof barrier is necessary?Community AnswerIt would come from above, but it will reflect and refract off of things around a building. So just using protection on the roof would be pointless.
-
QuestionCan I wrap my car in a faraday cage?Community AnswerA car is already a faraday cage, that's why you don't die when your car gets struck by lightning.
-
QuestionCan a plastic rolling suitcase be made into a faraday cage?Community AnswerNo, because it has to be made of something metal.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit