Q&A for How to String a Compound Bow

Return to Full Article

Coming soon

Add New Question

Question

Can compound bow cord be used on a crossbow?

Community Answer

No. Crossbows use much more considerable amount of weight compared to a compound bow, and the strings would be longer than the crossbow's.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 8
Question

How do I adjust draw length on older compound bows?

Carter Herzig

Community Answer

If it's a teardrop set-up, which is the v-shaped hooks, then you may be able to get a shorter draw string (maybe an inch shorter) for any other type of bow, and you will need a bow press. Loosen the limbs about 5 - 8 turns first; tightening the limbs back up will require less turns due to a shorter string.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 4
Question

Does it matter if the cables cross above the cable guard or below the cable guard?

Carter Herzig

Community Answer

Some are above, and some are crossed below. It depends on the cams and type of bow. One cable groove of the slide will have a deeper impression; this is for the inside cable when in place. Once you have the cables installed in the slider, they should not be touching each other at the cross-over. The cables should have about 1/8- to 1/4-inch gap between them (this is for waxing and keeping them from rubbing). This should tell you whether the cross-over will rest above or below. This is if the cables where installed by the manufacturer. Look for a picture of your exact bow and see if it matches with what you have set.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 4
Question

Can a recurve bow string be used on an old compound bow?

Community Answer

No, recurve bow strings are not long enough for compound bows.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0
Question

What size string is needed for an Indian Trophy?

Community Answer

Measure the length axle to axle. An Indian Pathfinder uses around 38''.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 0