How to Raise a Dorm Bed

PDF download Download Article
Elevate your space with these ways to raise and loft your bed
PDF download Download Article

Raising your bed is a great way to add some extra space to your dorm room. If you have a bed with a slotted frame, you can simply take out the bed frame and move it up to the slot that you want. If you want to loft your bed and add a lot of extra space underneath, you’ll need to borrow a lofting kit from your dorm and attach it to the bottom of your bed. You and your roommate can also bunk your beds to give your room more floor space. Finally, if you can’t raise, loft, or bunk your bed, you can use bed risers to add a little height to your frame. No matter what method you use, make sure you have a friend to help you, because bed frames are heavy.

How to Lift a Dorm Bed

Take the mattress off of the bed and use a rubber mallet to tap underneath the corners of the frame. Have someone else hold up the bed frame so it doesn’t fall. Take out the frame and put it back in the slots at your desired height.

Method 1
Method 1 of 4:

Raising Your Bed with a Slotted Frame

PDF download Download Article
  1. Raising your bed frame will be much easier with the mattress off, because the frame will be lighter. Take your mattress off, with the help of your roommate if you want, and lean it against the wall out of the way. [1]
    • If your dorm room is really tiny, it might be helpful to put your mattress out in the hall temporarily while you work on raising your bed frame.
  2. Tap upwards at the corner of the bed frame where the horizontal part of the frame slots into the bed legs. Do one corner at a time. Have a friend hold up the bed frame as you loosen it so that it doesn’t fall down. [2]
    • You can usually borrow a rubber mallet from your housing office.
    Advertisement
  3. You will definitely need a friend to help you with moving the bed frame to the right position. Make sure that all four corners of the frame are fully slotted into the right position on your bed. You should hear a clicking noise as the hooks on the corners of the bed frame slot into the legs of the bed. [3]
    • If you can’t get the corners of the bed frame completely slotted in with just your hands, hammer them down with the rubber mallet.
  4. Put your mattress back up onto your bed frame and put on your sheets and blankets. Once your bed is raised, you can store more things underneath it, like a chest of drawers or a laundry hamper.
    • If it turns out you don’t like the new height of your bed, you can always adjust it again.
    5. Advertisement
Method 2
Method 2 of 4:

Lofting Your Bed with a Lofting Kit

PDF download Download Article
  1. This kit should include 2 extra bed legs and 4 pegs. Sometimes lofting kits also come with a safety rail and a ladder to help you get into your bed once it’s lofted. [4] [5]
    • Most schools don’t make you pay extra for this lofting kit, but you should ask to make sure.
  2. Take the mattress off your bed frame and put it someplace out of the way. With the help of a friend, tip the bed frame onto its side. [6] Make sure you have plenty of room to work on the bed frame.
    • You may want to move the bed frame from its original position and out into the center of your dorm room to be able to work on it more easily. [7]
  3. Put the pegs in the holes in the bottom of the legs on your bed frame, and slide the new legs onto the pegs. The holes on the top of the new legs should fit perfectly onto the pegs. [8]
    • It’s helpful to have a friend at one side of the bed while you work on the other so you can slot the legs in at the same time.
  4. Carefully turn your bed onto its feet again and put it where you want it in your room. Put your mattress back on top of your bed and make your bed.
    • You can add a ladder to the side of your lofted bed or just climb up using the slats on the side.
  5. To keep yourself from falling out of your lofted bed, attach a safety rail on the side of the bed that won’t be protected by the wall. Usually, the safety rail just slots into the bed frame.
    • If you want a safety rail and don’t have one, you should ask your housing desk for it.
  6. Lofting your bed opens up a lot of space underneath. You can put a desk, a chest of drawers, or even a couch underneath your bed.
    • To have even more space in your room, help your roommate loft their bed, too.
    7. Advertisement
Method 3
Method 3 of 4:

Bunking Two Beds

PDF download Download Article
  1. You can’t just stack one bed on top of another and hope for the best––not only is it risky, but most schools don’t allow it. You need pegs to secure the top bed to the bottom bed, so that there’s no chance of the beds becoming separated. Get pegs from the housing office of your dorm. [9]
    • If you’re not sure where the housing office is for your dorm, ask a residential assistant or someone else on your hall who has already bunked or lofted their bed.
  2. Lifting up a bed frame is challenging enough without the added weight of the mattress. Decide which bed will be the top bed, and take the mattress off of that one. You can leave the mattress on the bottom bunk, because you won’t have to move that frame.
    • A convenient place to put the top mattress is on top of the bottom one.
  3. At each corner of the bottom bed, the leg of the bed should have a hole in it, where you can slot in the metal peg. Put one in each corner, so that you use all 4 pegs.
    • Always use all 4 pegs, because if you use less, your bed will be unstable.
  4. Lift the top bunk above the bottom bunk. Be sure to lift with your legs, not your back, to avoid injuring yourself. Line up the top bunk exactly over the bottom bunk, and slide the frame down onto the pegs.
    • You have to lower all four legs down at the same time to get them all onto the pegs.
  5. To help keep whoever is in the top bunk from falling out, attach a safety rail to the edge of the top bunk that’s not against the wall. Usually, safety rails have little hooks on the bottom that you can slot over the metal edge of your bed frame.
    • If you don’t have one in your room already, borrow it from the housing office.
  6. Put the mattresses back onto the upper bunk, so that each bunk has a mattress. Enjoy all the extra space in your dorm room that bunking your beds opened up. You and your roommate can decide who wants which bed.
    • You can climb up to the top bunk using the side slats on your bed, or ask for a ladder from the housing office.
    7. Advertisement
Method 4
Method 4 of 4:

Raising Your Bed with Risers

PDF download Download Article
  1. While most dorm beds are easy to loft, some beds aren’t. Luckily, you can raise dorm beds the same way you raise a normal bed , with risers.
    • Risers help if you only want to raise your bed a little bit, but you won’t be able to loft your bed.
  2. Risers usually come in 3 or 5 inches (7.6 or 12.7 cm). If you want to raise your bed higher, get stackable bed risers, so that you can stack the 3 and 5 inches (7.6 and 12.7 cm) for 8 inches (20 cm). [10]
    • When deciding what height you want to raise your bed to, balance the benefit of extra storage space with the extra difficulty of climbing onto a high bed.
    • You can buy bed risers at a home supply store or online.
  3. Continue until all four risers are underneath the bed. Make sure that all four risers are the same height, so that your bed is level.
    • If your bed is too heavy to lift, take off your mattress and put it someplace out of the way. Replace it once you're done.
  4. Having some extra room under your bed is very helpful in the tight space of a dorm room. Make full use of the extra space by storing dresser drawers, suitcases, a laundry basket, shoes, or whatever else you want.
    • Stacking items underneath your bed or keeping them organized in bins will help you save space.
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      Lofting

      • Rubber mallet
      • Someone to help you

      Bunking

      • Pegs
      • Rubber mallet
      • Safety guard rail (optional)
      • Someone to help you

      Using Bed Risers

      • 4 bed risers
      • Someone to help you

      Tips

      • Different schools may have different kinds of beds and different rules on how to raise them.
        Thanks
        Helpful 0 Not Helpful 0
      • If you have a roommate (or two), you might want to consult with them to decide how to set up everyone’s beds so that they all fit well.
        Thanks
        Helpful 0 Not Helpful 0
      • Be careful when standing up under a loft bed so that you don’t bang your head.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      References

      1. ↑ https://www.vanderbilt.edu/ohare/video-how-to-unloft-and-loft-your-bed/
      2. ↑ https://www.ifixit.com/Guide/How+to+Un-loft+a+College+Dorm+Bed/133595
      3. ↑ https://www.ifixit.com/Guide/How+to+Un-loft+a+College+Dorm+Bed/133595
      4. ↑ https://housing.wsu.edu/media/dewhsnxa/rtl_toolfreebeduserguide.pdf
      5. ↑ https://housing.wsu.edu/media/dewhsnxa/rtl_toolfreebeduserguide.pdf
      6. ↑ https://housing.wsu.edu/media/dewhsnxa/rtl_toolfreebeduserguide.pdf
      7. ↑ https://housing.wsu.edu/media/dewhsnxa/rtl_toolfreebeduserguide.pdf
      8. ↑ https://www.vanderbilt.edu/ohare/video-how-to-unloft-and-loft-your-bed/
      9. ↑ https://youtu.be/hwOdo75H6Uo?t=144
      1. ↑ https://youtu.be/dbFCRpoBk-M?t=62

      About This Article

      Thanks to all authors for creating a page that has been read 133,698 times.

      Did this article help you?

      Advertisement