How to Interpret Your Residential Electrical Meter

PDF download Download Article
A straightforward look at the digits and dials on your electrical meter
PDF download Download Article

If your utility bill seems unusually high, you’re troubleshooting with your utility company, or you’re trying to figure out if your current monthly usage is going to break the bank, you may need to read your electrical meter. But what do all of those dials and strange numbers actually mean? In this article, we’ll break down everything you need to do to analyze your electrical meter.

Things You Should Know

  • For analog meters, each dial represents one digit. Always round down and note that the orientation of each individual dial changes.
  • On digital meters, the reading is displayed on the screen. Ignore any decimals or extra digits at the end.
  • Subtract your previous bill’s total kWh usage from the current reading you’ve taken to determine your current monthly usage.
Method 1
Method 1 of 3:

Analog Dial Meters

PDF download Download Article
  1. Locate the 4 or 5 small dials on the face of your electrical meter. The dials are arranged with the biggest digit on the left and the smallest digit on the right, just like you’re reading a line in a book. [1]
    • A lot of sources and energy companies will tell you to read the meters right to left, but frankly, that’s just complicating things unnecessarily. [2]
    • You can either write down the numbers, or draw each dial on paper and analyze them indoors if it’s cold out.
    • Some meters have 4 dials, while others may have 5 dials. The number of dials doesn’t change this process at all.
    • Note, this process only applies to the dial meters—not the analog rotary meters with spinning numbers. The rotary meters are read like digital meters.
  2. Each dial on your meter will normally alternate between clockwise and counterclockwise. Look on top of each dial to see if the numbers are front to back, or back to front. [3]
    • Some meters will even have little arrows on top of each dial displaying which direction they go.
    • You may even be able to see the little dials moving in the direction they’re meant to travel if you’re currently using a lot of juice.
    Advertisement
  3. The pointer on the dial is rarely going to be sitting exactly on a number. When it’s between two digits, always round down to the lower number. So, if the pointer sits between 5 and 6, read it as a 5. [4]
    • Remember! We’re rounding down by number, not direction here—for the counterclockwise dials, the lower number will be to the left, not the right.
    • The one exception is if the dial is between a 9 and 0 on a clockwise-oriented dial. Here, the 0 actually represents “10,” so rounding down is the 9.
  4. If a number sits directly on a number and the dial to the right doesn’t read as “0,” record the number the pointer is sitting on top of. If the dial on the right is a 0 though, round down to the next lowest number. [5]
    • For example, if the pointer on a dial rests perfectly on a 4 but the dial to the right of it sits clearly at 0, then treat the digit as a 3.
  5. You now have the reading for the total energy consumption of your home. The number is in kilowatt-hours, or kWh. This is the measure of how many kilowatts your home has consumed, with 1 kilowatt-hour equal to the consumption of 1,000 watts for 1 hour.
    • So, if the meter reads 4982, your home has consumed 4,982 kWh up to this point.
    • Keep in mind, your meter never actually resets. So, if you’re shocked by the number, just remember that it only goes up. A 10-year-old electrical meter is probably going to have a bigger reading than a 3-year-old meter, for example. [6]
    6. Advertisement
Method 2
Method 2 of 3:

Digital Meters

PDF download Download Article
  1. Grab a piece of paper and a pen. Head outside and stand in front of your meter. Your meter’s reading is the large number displayed in the center of the screen. Write this number down going from left to right. [7]
    • This process is identical for rotary meters as well, which don’t have dials or digital screens, but those rolls of numbers that rotate. They’re technically analog, but you read them like digital meters.
  2. Depending on the design of your meter, there may be decimals or extra digits on the side of the main reading. These digits are either rate settings or fractions of the reading, and they may be a different color or style. Don’t worry about these. [8]
    • If they’re decimal points, they’re going to change by the time you do the math on your current bill anyway, and they’re insignificant enough that they probably don’t even show up on your bill anyway.
  3. If there are 2 different readings displayed, or the number flashes to display a different reading, you have multiple readings. Write down both numbers. Both readings are valid here, they’re just tied to different payment rates. [9]
    • Some utility companies will charge more for energy usage during peak hours as an effort to incentivize consumers to take it easy when the grid is under a lot of pressure. This is common in dense areas, like New York City or Chicago.
    4. Advertisement
Method 3
Method 3 of 3:

Finding Your Current Usage

PDF download Download Article
  1. Find last month’s energy bill. Look for a line like “total reading” or “electrical meter reading.” This number should be slightly lower than the number you jotted down when you were reading your meter outside. [10]
    • Your bill probably highlights the “monthly usage” since that’s what you’re paying for. The total usage or total reading might be listed in a smaller font or lower down on your bill.
    • Just as a reminder, your electrical meter never resets. If your previous month usage appears to be higher than the reading on your current meter, contact your utility company. Your meter is defective.
  2. Take your current reading and subtract the total from last month’s bill. This will give you your current electrical usage for the month. [11]
    • For example, if your meter currently reads 4,392 and last month’s bill’s total usage is 4,302, your current monthly usage is 90 kWh.
  3. By monitoring your monthly electrical usage, you can get a better sense for how much your energy consumption actually costs. It’s also a good way to determine whether something is actually wrong with your meter or electrical usage. If your current behavior doesn’t match the number you see on the meter, it’s time to call your electrical company. [12]
    • You may also need to check your current meter when you’re on the phone with your utility company to confirm that they’ve got the right meter.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    When would you need to read your electric meter?
    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie
    Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA (Environmental Protection Agency) Certified construction company located in Manhattan, New York. CN Coterie specializes in full home renovation, electrical, plumbing, carpentry, cabinetry, furniture restoration, OATH/ECB (Office of Administrative Trials and Hearings/Environmental Control Board) violations removal, and DOB (Department of Buildings) violations removal. Ricardo has over 10 years of electrical and construction experience and his partners have over 30 years of relevant experience.
    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie
    Expert Answer
    I can't necessarily think of a scenario where you'd need to do this. The information on your meter is important to your electric company, but they'll send a crew out to read the meter if they need it. It's likely not going to come up very often for you.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 58 Helpful 11
  • Question
    What does T stand for on my digital meter?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Are you in Ireland? If so, the T stands for "total amount of imported units." You shouldn't have a T on your meter outside of Ireland so far as our research shows, though.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    I have the digital meter there are two sets of numbers that flash back and forth from one to the other. What's that?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    It means you have two different pay rates. Sometimes, utility companies will charge more for electricity during the peak hours when people are most likely to use appliances and turn on lights.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • There’s usually a number printed on the bottom of your electrical meter. That’s typically your meter number. When you call your utility company, they might ask for that. [13]
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Read a Water Meter
      How to
      Read a Gas Meter
      How to
      Measure Amperage
      How to
      Read a Capacitor
      How to
      Calculate Wattage
      How to
      Test a Relay
      How to
      Measure Inductance
      How to
      Test a Capacitor
      How to
      Test a Potentiometer
      How to
      Test Voltage with a Multimeter
      How to
      Determine Amperage of Circuit Breaker
      How to
      Calculate Kilowatt Hours
      How to
      Measure Capacitance
      How to
      Calibrate, Use, and Read an Ohmmeter
      Advertisement

      References

      1. ↑ https://www.essentialenergy.com.au/at-home/how-to-read-your-meter
      2. ↑ https://youtu.be/VQQCtKLZpwQ?t=104
      3. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      4. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      5. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      6. ↑ https://palmetto.com/learning-center/blog/how-does-electric-meter-work-and-what-does-electric-meter-do
      7. ↑ https://california.libertyutilities.com/portola/residential/my-account/my-bill/meter-reading-el.html
      8. ↑ https://www.citizensadvice.org.uk/consumer/energy/energy-supply/your-energy-meter/how-to-read-your-energy-meter/
      9. ↑ https://www.citizensadvice.org.uk/consumer/energy/energy-supply/your-energy-meter/how-to-read-your-energy-meter/
      1. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      2. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      3. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8
      4. ↑ https://www.fortisalberta.com/docs/default-source/default-document-library/how-to-read-your-meter.pdf?sfvrsn=637f811b_8

      About This Article

      Article Summary X

      To read a digital electric meter, read the series of large numbers near the center of your meter and write them down. If you wish to calculate how many kilowatt hours you’ve used in the last month, subtract the current reading from the previous reading, which should be stated on your most recent bill. For more tips on reading meters, like how to read analog electric meters, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 583,408 times.

      Reader Success Stories

      • J. A.

        Feb 14, 2017

        "Detailed description of how to read the digit of AN analog meter if the arrow is between two numbers helped."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement