Download Article
Download Article
Is your security camera not working as well as it did when you got it? If your camera isn't playing audio, looks blurry, or doesn't seem to stay connected to your Wi-Fi network, you'll most likely need to reset it to its factory settings. Unfortunately, to do this, you will need to be near your camera since you can't do this remotely with the app or website. This wikiHow article teaches you how to reboot your Ring camera using the physical buttons on it. Find the correct model of your camera in the Ring app by going to The Ring App > Devices > Your Camera > Device Health > Device Details > Product Name .
Steps
-
Locate the orange button. It's the button that you used to set it up. You'll need to lift the cover on the back of the camera to find it. [1] X Research source
- This works for every Ring camera, including the Spotlight Cam.
- You'll need to take off the battery cover to find this setup button for Stick Up Cam Battery, 2nd and 3rd gen as well as the Stick Up Cam Plug-in.
-
Press and hold the button for 10-20 seconds. A light should start flashing on the front of your camera. [2] X Research sourceAdvertisement
-
Wait for it to reset then set it up again. Once you press the button and the light begins to flash, it will flash for a few minutes while the camera resets to factory settings. When the reset process is complete, the light will turn off and you'll be able to set it up again. [3] X Research source
Advertisement
-
Open the Ring app. This app features the word "ring" in white while the dot on the "i" is orange. [4] X Research source
- You'll need to do this before you sell or give away your camera. If you don't remove the camera from your account, the other person will not be able to add the camera to their account.
-
Tap the camera you intend to remove from your account. More details will open about that camera.
-
Tap Device Settings . It's next to a gear icon.
-
Tap General Settings . You'll see this near the bottom of the menu.
-
Tap Remove This Device . This is at the bottom of the listing of options next to a trashcan icon. Tapping this will remove all your data from the camera (like saved recordings) so you can give it to someone else. [5] X Research source
- You may need to tap Remove Device again to confirm. [6] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- To reconnect your camera to your Wi-Fi after you reset it, open the app and tap the three-line menu icon. Tap Devices > Your Camera > Device Health > Reconnect to Wi-Fi/Change Wi-Fi network . [7] X Research sourceThanks
- Ring has more than just security cameras: check out How to Reset a Ring Doorbell and How to Install a Ring Doorbell too.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://support.help.ring.com/hc/en-au/articles/4405018931604-How-to-completely-reset-your-Ring-Security-Camera
- ↑ https://support.help.ring.com/hc/en-au/articles/4405018931604-How-to-completely-reset-your-Ring-Security-Camera
- ↑ https://support.help.ring.com/hc/en-au/articles/4405018931604-How-to-completely-reset-your-Ring-Security-Camera
- ↑ https://ring.com/support/articles/a7tsd/Downloading-and-Updating-the-Ring-App
- ↑ https://ring.com/support/articles/lqv9a/Moving-Home-With-Your-Video-Doorbell-and-Security-Cameras
- ↑ https://ring.com/support/articles/lqv9a/Moving-Home-With-Your-Video-Doorbell-and-Security-Cameras
- ↑ https://ring.com/support/articles/qzhz4/How-to-Reconnect-Your-Video-Doorbell-or-Security-Camera-to-Wifi
About This Article
Thanks to all authors for creating a page that has been read 30,697 times.
Advertisement