How to Reduce Guitar String Noise

PDF download Download Article
PDF download Download Article

Guitar string noise can occur when changing chords or fingering on an acoustic guitar or when doing various effects on an electric guitar. Typically, you can reduce or even eliminate unwanted string noise simply by changing your fretting technique. It can take some practice to get it right — especially if you've been playing for a while and have developed some fretting habits that are less than ideal — but with patience, you'll get there. If you still get unwanted noise, you might want to experiment with different strings or accessories that are designed to reduce this noise.

Method 1
Method 1 of 3:

Polishing Your Acoustic Fretting Technique

PDF download Download Article
  1. Take a song you're really familiar with and slow down the tempo. Use a metronome to help you keep time. As you play, listen for spots where you squeak. Then you can figure out how you're moving your fretting hand or what you're doing wrong. [1]
    • For example, it may be that you only squeak when transitioning between particular chords. If you know which chord transitions are difficult for your hand, you'll have a better idea of what you need to do to improve your technique.
    • If you video yourself playing (with the camera focused on your fretting hand), you can more easily pinpoint the areas where squeak is occurring and what your hand is doing to cause it.
  2. Immediately after you've played the note, stop pressing down with your finger on the string. Instead, let it rest lightly in position on top of the string. You might also transition from the tip of your finger to the pad of your finger. [2]
    • When you remove your finger completely, you risk playing an open string. This way, your finger stays in position but without any pressure.
    Advertisement
  3. Get in the habit of lifting and moving as 2 separate movements. You may have gotten used to keeping your fingers close to the strings so you don't accidentally fret a string incorrectly. If you know where your fingers are supposed to go, though, this shouldn't be a worry anymore. Trust your muscle memory to know how to move around the fretboard and make different chord shapes. [3]
    • Since you already released the pressure on the string before you moved your hand, the string shouldn't squeak when you take your finger off completely.
    • Playing slowly can help you develop this habit. If you're bad about sliding your fingers over the strings, it might feel like you're learning how to play guitar all over again. But don't worry — with practice, it will become second nature to lift, then shift.
  4. Practice transitioning between different chords and positions by lifting your hand straight off the fretboard and then dropping it back into the new position. This is perhaps the most difficult part of this technique, especially if you frequently lose your place on the fretboard if you take your fingers off the strings. [4]
  5. Sometimes, you can't avoid sliding a finger over a string. When you're in this situation, tilt your finger slightly so that you're sliding with the pad of your finger. [5]
    • The calloused tip of your finger creates more friction that causes the squeaks, whereas the pad of your finger won't do this as much.
    6. Advertisement
Method 2
Method 2 of 3:

Muting Unplayed Strings

PDF download Download Article
  1. As you're playing, the palm of your picking hand naturally falls over the thicker strings — especially when you're playing the thinner strings. Let your palm rest lightly on top of the strings above the string you're playing to keep them from ringing out. [6]
    • This technique only works if you're playing notes on thinner strings. If you're playing notes on thicker strings, your palm won't be in a good position to mute strings for you.
  2. Drop the fingers not holding the pick and lean them against the thinner strings than the one you're playing to mute them as well. Using them in conjunction with your palm, you can successfully mute all the strings except the one you're playing. [7]
    • If you're not used to playing this way, it can be challenging at first to get used to resting your hand on the strings. Pick a solo you know well and slow down the tempo so you can practice your picking hand position. After a while, it will become second nature.
  3. If you find it too awkward to mute strings with the fingers of your picking hand, the index finger on your fretting hand can do the same job. Extend your index finger over the strings that aren't covered or muted by your palm. [8]
    • For example, if you're bending a note, you can use the tip of your index finger to mute the string directly above the string you're bending so it won't make any sound and you'll get a clean bend. [9]
    • This technique might involve either extending your index finger forward or bending it back to mute strings behind the string you're playing. For a clean sound, you want to mute all strings except the one that you're playing.
  4. If you're playing an electric guitar, the gain setting determines how clean (or dirty) your guitar sounds. Higher gain results in greater noise and distortion, which can also help you practice your muting to eliminate unwanted noise. [10]
    • Think about this like baseball players taking practice swings with a weighted bat. If you can eliminate unwanted noise with high gain, you'll have no problem with unwanted noise when you lower it.
    5. Advertisement
Method 3
Method 3 of 3:

Trying Different Gear

PDF download Download Article
  1. Buy coated strings online or in a guitar specialty shop. Take off your regular strings and restring your guitar with the coated strings. Since coated strings are slicker, your fingers won't squeak as much when you slide across them. [11]
    • There are many different brands with different levels of quality, so it's important to compare them before you buy. Guitar techs at music or guitar specialty shops might be able to recommend some for you based on your experience level and playing style.
    • Because coated strings are slicker than regular strings, it can take some time to adjust your playing style to accommodate them. When you use them for the first time, you might find that you have a hard time keeping your fingers in the right place. Just play on them and take some time to get used to them.
    • Coated or polished strings are also available for classical guitars, although they can be quite pricey. Work on your technique to eliminate as much squeak as possible before you make this investment. [12]
  2. Slide a microfiber cloth under one of the strings and pull it through so it wraps the string. Then, rub the string from end to end with the cloth to clean it. Repeat with all of your other strings. Spray the lubricant directly on the strings, wiping off any excess with the cloth. [13]
    • Play your guitar immediately after cleaning your strings and see if that makes a difference before you apply lubricant. If you clean your strings after every session, you'll likely notice fewer squeaks.
    • Only use a lubricant designed specifically for guitar strings. Other lubricants could damage either your strings or the guitar itself.
    • Try working on your technique before you go with a string lubricant. If poor technique is the reason for your string noise, adding lubricant may not help and could even make the problem worse. [14]
  3. Buy a string dampener, a piece of cloth or canvas, at guitar shops or online. Wrap it around the neck of your guitar above the first fret to keep all the strings partially muted. Especially if you're recording, a string dampener can reduce string noise that isn't caused by poor fretting technique on your part. [15]
    • String dampeners are most common in a studio setting, where the sensitive audio equipment will pick up sounds you might not even hear yourself when you play. However, many guitarists also use them in a concert setting, especially when playing complex solos.
    • While you can buy a string dampener made especially for this purpose, a scrunchy or hair tie will likely work just as well, if you're looking for a DIY solution or just want to try it out before you commit to using a string dampener while playing.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • A little string squeak is normal and adds character to your playing, which can be a good thing. You'll often hear squeaks from even the most accomplished guitarists, especially when they're playing acoustic. [16]
        Thanks
        Helpful 2 Not Helpful 0
      • If you believe there's an issue with your guitar, try taking it to a professional repairman so they can adjust the right string height, making strings not too hard to press down and alleviating the issue.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Work on your technique before you try different gear to reduce string noise. Poor technique will limit your ability to play and you'll have difficulty advancing if you're using gear to mask it. [17]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Attach a Strap to an Electric or Acoustic Guitar
      How to
      Use a Guitar Whammy Bar
      4 Ways to Hold a Guitar Pick
      How to
      Make Homemade Guitar Picks
      How to
      Make a Guitar Pickup
      The Best Ways to Personalize Your Acoustic or Electric Guitar
      How to
      Use a Guitar Tuner
      How to
      Make a Custom Guitar Strap
      How to
      Make a Capo with Office Materials
      How to
      Make a Guitar Case
      How to
      Install Schaller Strap Locks
      How to
      Install Guitar Pickups
      How to
      Use a Guitar Pedal
      How to
      Build a Talk Box
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about reducing guitar string noises, check out our in-depth interview with Tomas Michaud .

      References

      1. ↑ https://www.classicalguitarshed.com/guitar-squeak/
      2. ↑ https://www.classicalguitarshed.com/guitar-squeak/
      3. ↑ https://www.classicalguitarcorner.com/l305-finger-noise-on-the-classical-guitar/
      4. ↑ https://www.classicalguitarshed.com/guitar-squeak/
      5. ↑ https://www.classicalguitarcorner.com/l305-finger-noise-on-the-classical-guitar/
      6. ↑ https://youtu.be/DLQ6fbKISFo?t=291
      7. ↑ https://youtu.be/NGbCZLgCnbw?t=13
      8. ↑ https://youtu.be/DLQ6fbKISFo?t=431
      9. ↑ https://youtu.be/DLQ6fbKISFo?t=177
      1. ↑ https://youtu.be/DLQ6fbKISFo?t=467
      2. ↑ http://www.professorstring.com/archives/coated_guitar_strings.php
      3. ↑ https://www.classicalguitarcorner.com/l305-finger-noise-on-the-classical-guitar/
      4. ↑ https://guitargearfinder.com/faq/how-to-clean-guitar-strings/
      5. ↑ https://www.musicradar.com/guitartechniques/how-to-reduce-acoustic-string-noise-492656
      6. ↑ https://guitargearfinder.com/guides/string-dampeners-and-fret-wraps/
      7. ↑ https://acousticguitar.com/the-basics-four-ways-to-silence-your-strings/
      8. ↑ https://www.musicradar.com/guitartechniques/how-to-reduce-acoustic-string-noise-492656

      About This Article

      Thanks to all authors for creating a page that has been read 31,833 times.

      Did this article help you?

      Advertisement